OLED to Become Leading Smartphone Display Technology in 2020
July 26, 2016 | IHS MarkitEstimated reading time: 1 minute
Although liquid-crystal display (LCD) has dominated mobile phone displays for more than 15 years, organic light-emitting diode (OLED) display technology is set to become the leading smartphone display technology in 2020, according to IHS Markit. AMOLED displays with a low-temperature polysilicon (LTPS) backplane will account for more than one-third (36 percent) of all smartphone displays shipped in 2020, becoming the most-used display technology in smartphone displays, surpassing a-Si (amorphous silicon) thin-film transistor (TFT) LCD and LTPS TFT LCD displays.
“While OLED is currently more difficult to manufacture, uses more complicated materials and chemical processes, and requires a keen focus on yield-rate management, it is an increasingly attractive technology for smartphone brands,” said David Hsieh, senior director, IHS Markit. “OLED displays are not only thinner and lighter than LCD displays, but they also boast better color performance and enable flexible display form factors that can lead to more innovative design.”
Samsung Electronics has already adopted OLED displays in its smartphone models, and there is also increasing demand from Chinese Huawei, OPPO, Vivo, Meizu and other smartphone brands. Apple is also now widely expected to use OLED displays in its upcoming iPhone models.
At one time, OLED displays were entirely glass-based and in terms of performance, there was little difference between LCD and OLED displays. Now, flexible OLED displays made from thinner and lighter plastic are enabled and have drawn Apple’s attention. “Apple’s upcoming adoption of OLED displays will be a milestone for OLED in the display industry,” Hsieh said.
Samsung Display, LG Display, Sharp, JDI, BOE, Tianma, GVO, Truly, and CSOT are also starting to ramp up their AMOLED manufacturing capacities and devote more resources to technology development. Samsung Display’s enormous sixth-generation A3 AMOLED fab, for example, will enable even more AMOLED displays to reach the market. Global AMOLED manufacturing capacity will increase from 5 million square meters in 2014 to 30 million square meters in 2020.
“Many display manufacturers were investing in LTPS LCD, thinking it would overtake a-Si technology,” Hsieh said. “However, many of the fabs under construction, especially in China, have had to change their plans to add OLED evaporation and encapsulation tools, because OLED penetration has been more rapid than previously expected.”
Suggested Items
Intervala Hosts Employee Car and Motorcycle Show, Benefit Nonprofits
08/27/2024 | IntervalaIntervala hosted an employee car and motorcycle show, aptly named the Vala-Cruise and it was a roaring success! Employees had the chance to show off their prized wheels, and it was incredible to see the variety and passion on display.
KIC Honored with IPC Recognition for 25 Years of Membership and Contributions to Electronics Manufacturing Industry
06/24/2024 | KICKIC, a renowned pioneer in thermal process and temperature measurement solutions for electronics manufacturing, is proud to announce that it has been recognized by IPC for 25 years of membership and significant contributions to electronics manufacturing.
Boeing Starliner Spacecraft Completes Successful Crewed Docking with International Space Station
06/07/2024 | BoeingNASA astronauts Barry "Butch" Wilmore and Sunita "Suni" Williams successfully docked Boeing's Starliner spacecraft to the International Space Station (ISS), about 26 hours after launching from Cape Canaveral Space Force Station.
KIC’s Miles Moreau to Present Profiling Basics and Best Practices at SMTA Wisconsin Chapter PCBA Profile Workshop
01/25/2024 | KICKIC, a renowned pioneer in thermal process and temperature measurement solutions for electronics manufacturing, announces that Miles Moreau, General Manager, will be a featured speaker at the SMTA Wisconsin Chapter In-Person PCBA Profile Workshop.
The Drive Toward UHDI and Substrates
09/20/2023 | I-Connect007 Editorial TeamPanasonic’s Darren Hitchcock spoke with the I-Connect007 Editorial Team on the complexities of moving toward ultra HDI manufacturing. As we learn in this conversation, the number of shifting constraints relative to traditional PCB fabrication is quite large and can sometimes conflict with each other.