Rogers to Exhibit High-Performance Circuit Materials at PCB West
September 12, 2016 | Rogers CorporationEstimated reading time: 3 minutes
Rogers Corporation will bring its materials expertise to PCB West on September 14 at the Santa Clara Convention Center (Santa Clara, CA), booth 201. Rogers will exhibit its high-performance circuit materials in addition to supporting a technical symposium for printed-circuit-board (PCB) users and designers with a presentation on the effects of conductor metal surface roughness on high-frequency PCB performance.
Rogers will show a sampling of its material-based solutions, including 92ML™ thermal management materials. Designed to dissipate heat in high-power applications, thermally enhanced 92ML laminates and prepregs are halogen-free, flame-retardant thermally conductive epoxy-based thermoset materials with outstanding heat-transfer characteristics. They provide a cost-effective, lead-free-solder-compatible solution for effectively dissipating heat in multilayer circuit designs.
With a glass transition temperature (Tg) of +160C and high thermal conductivity of 2.0 W/m•K, 92ML materials can be supplied with copper cladding to 4 oz. thickness, to handle the most demanding heat-transfer requirements in power supplies and automotive electronics. When even greater cooling capability is needed, 92ML StaCool™ laminates are available with an insulated metal substrate (IMS). The IMS heatsink can be machined to a customer’s requirements, serving as part of the mechanical design in the final application.
Rogers’ thermal management materials also includes COOLSPAN® TECA adhesive film for bonding heatsinks to circuit materials with reliable thermal interfaces. This lead-free-process-compatible thermoset, epoxy-based, silver-filled adhesive film features outstanding thermal conductivity of 6 W/m•K to ensure thermally stable bonds between heatsinks and PCB materials. COOLSPAN TECA represents a practical alternative to fusion bonding, sweat soldering, press-fit, and other methods for attaching circuits to heatsinks and other mechanical structures.
RO3003™ laminates are ideal for loss-critical millimeter wave frequency designs, where consistent circuit performance matters, such as automotive radar sensors and point-to-point microwave backhaul communications systems. While already a benchmark for 77 GHz automotive radar sensors, RO3003 3.0 dielectric constant laminates are available with ½ ounce and 1 ounce rolled copper foil. Combining the very low dielectric loss of the RO3003 PTFE-ceramic resin system with smooth foil, results in high frequency circuit materials with best-in-class insertion loss. Also available with up to 0.040” thick copper plate.
Rogers CLTE-XT™ laminates also combine ceramic and PTFE materials to achieve excellent electrical and mechanical stability for a wide range of applications, from amplifiers to passive components. These materials are characterized by low coefficient of thermal expansion (CTE) in all three axes and stable Dk with temperature. They are well suited for phase-sensitive circuits including in microwave feed networks and in satellite-communications (satcom) systems.
Quick Turn Inventory Program
Visitors to Booth 201 can also learn about Rogers’ Quick Turn Inventory Program for North American fabricators. The program assists those faced with time-sensitive prototyping requirements by shipping select RO4000® circuit materials within two business days after receipt of order. Products included are: RO4003C™, RO4350B™, and RO4835™ laminates and RO4450B™ and RO4450F™ bondply materials.
Design Session Presentation by John Coonrod
As part of the Free Design Session, John Coonrod, Technical Marketing Manager, will present “Copper Foil Surface Roughness and its Effect on High Frequency Performance,” Wednesday, September 14, from 10 AM to 11 AM. The presentation details how the surface roughness of a PCB’s copper conductor can affect a circuit’s insertion-loss and phase performance, especially at higher frequencies.
About Rogers Corporation
Rogers Corporation (NYSE:ROG) is a global technology leader in engineered materials to power, protect, and connect our world. With more than 180 years of materials science experience, Rogers delivers high-performance solutions that enable clean energy, Internet connectivity, advanced transportation and other technologies where reliability is critical. Rogers delivers Power Electronics Solutions for energy-efficient motor drives, vehicle electrification, and alternative energy; Elastomeric Material Solutions for sealing, vibration management, and impact protection in mobile devices, transportation interiors, and prformance apparel; and Advanced Connectivity Solutions materials for wireless infrastructure, automotive safety and radar systems. Headquartered in Connecticut (USA), Rogers operates manufacturing facilities in the United States, China, Germany, Belgium, Hungary, and South Korea, with joint ventures and sales offices worldwide. For more information, click here.
Rogers Corporation (NYSE:ROG) is a global technology leader in engineered materials to power, protect, and connect our world. With more than 180 years of materials science experience, Rogers delivers high-performance solutions that enable clean energy, Internet connectivity, advanced transportation and other technologies where reliability is critical. Rogers delivers Power Electronics Solutions for energy-efficient motor drives, vehicle electrification, and alternative energy; Elastomeric Material Solutions for sealing, vibration management, and impact protection in mobile devices, transportation interiors, and prformance apparel; and Advanced Connectivity Solutions materials for wireless infrastructure, automotive safety and radar systems. Headquartered in Connecticut (USA), Rogers operates manufacturing facilities in the United States, China, Germany, Belgium, Hungary, and South Korea, with joint ventures and sales offices worldwide. For more information, click here.
Suggested Items
Connect the Dots: Designing for Reality—The Pre-Manufacturing Process
05/08/2024 | Matt Stevenson -- Column: Connect the DotsI have been working with Nolan Johnson on a podcast series about designing PCBs for the reality of manufacturing. By sharing lessons learned over a long career in the PCB industry, we hope to shorten learning curves and help designers produce better boards with less hassle and rework. Episode 2 deals with the electronic pre-manufacturing process. Moving from CAD (computer-aided design) to CAM (computer-aided manufacturing) is a key step in PCB manufacturing. CAM turns digital designs into instructions that machines can use to actually build the PCB.
AIM Solder Signs Shinil Fl Ltd. as New Distributor for Korea
05/08/2024 | AIM SolderAIM Solder, a leading global manufacturer of solder assembly materials for the electronics industry, is pleased to announce a new distribution partnership with Shinil Fl Ltd., a prominent supplier of technological solutions in the SMT and semiconductor sectors.
Indium Corporation to Showcase HIA Materials at ECTC
05/07/2024 | Indium CorporationAs an industry leader in innovative materials solutions for semiconductor packaging and assembly, Indium Corporation® will feature its advanced products designed to meet the evolving challenges of heterogeneous integration and assembly (HIA) and fine-pitch system-in-package (SiP) applications at the 74th Electronic Components and Technology Conference (ECTC), May 28‒31, in Denver, Colorado.
Indium Corporation Expert to Present on Pb-Free Solder for Die-Attach in Discrete Power Applications
04/30/2024 | Indium CorporationIndium Corporation Product Manager – Semiconductor Dean Payne will present at the Advanced Packaging for Power Electronics conference, hosted by IMAPS, held May 8-9 in Woburn, Massachusetts, USA.
Taiyo Circuit Automation Installs New DP3500 into Fuba Printed Circuits, Tunisia
04/25/2024 | Taiyo Circuit AutomationTaiyo Circuit Automation is proud to be partnered with Fuba Printed Circuits, Tunisia part of the OneTech Group of companies, a leading printed circuit board manufacturer based out of Bizerte, Tunisia, on their first installation of Taiyo Circuit Automation DP3500 coater.
Copyright © 2024 I-Connect007 | IPC Publishing Group Inc. All rights reserved.
Log in