Vitesco Technologies and ROHM Cooperate on Silicon Carbide Power Solutions

Estimated reading time: 2 minutes

The powertrain business area of Continental Vitesco Technologies, a leading supplier in the field of vehicle electrification, and ROHM Semiconductor, a leading company in SiC power semiconductors, have recently signed a development partnership, beginning in June 2020. Vitesco Technologies will use SiC components to further increase the efficiency of its power electronics for electric vehicles (EV). Through their higher efficiency SiC semiconductors make better use of the electric energy stored in a vehicle battery. Thus, an EV has a longer range, or the battery cost can be reduced without impacting the range. 

“Energy efficiency is of paramount importance in an electric vehicle. As the traction battery is the only source of energy in the vehicle, any losses caused by power conversion need to be minimized. We are therefore developing a SiC option within our modular power electronics system," says Thomas Stierle, Executive Vice President of the Electrification Technology business unit at Vitesco Technologies. “To get the maximum efficiency out of the power electronics and the e-motor we will use SiC power devices from our preferred partner. ROHM has convinced us of its products”

“We are looking forward to the future cooperation with Vitesco Technologies”, says Dr. Kazuhide Ino, Corporate Officer, Director of Power Device business unit at ROHM Co.,Ltd. “We are the leading company in SiC power semiconductors and have achieved a significant technological lead in this field along with the provision of power solutions combined with gate driver ICs. Together with Vitesco Technologies we want to further improve the energy efficiency of the electronic system in EVs to use the full potential of the SiC technology for a sustainable mobility.”

Squeezing out the best performance level by SiC

Vitesco Technologies is already developing and testing SiC technology in an 800-volt inverter concept to confirm the efficiency potential of the technology. The approach of this program is to look at the complete system of inverter and motor to identify the best combination of device technology and switching strategy. 

In this context SiC semiconductors – e.g. SiC MOSFETs for 800-volt battery systems – offer more efficient switching in the inverter (higher frequency, steeper switching slopes) and cause fewer harmonic losses in the electric motor. Also, SiC technology is a key enabler for super-fast charging technology that uses 800 volts.

In the course of the cooperation ROHM and Vitesco Technologies will work on creating the optimum combination of ROHM’s SiC technology for high volume manufacturing and best fit of inverter design for highest efficiency. 

“The SiC option is a very promising future part of our modular power electronics system comprising of software, power output stage, and switching strategy”, says Dr. Gerd Rösel, Head of Innovation in the Electrification Technology business unit at Vitesco Technologies. “We will work with ROHM on a 800-volt SiC inverter solution as well as on a 400-volt SiC inverter solution.” Vitesco Technology plans the start of production of the first SiC inverter as of 2025, when the demand for SiC solutions is expected to rise significantly. “In other words, our partnership and development are perfectly on time”, says Rösel.

The preferred partnership will also be benefiting from short distances: Vitesco Technologies and ROHM both have sites at Nuremberg (ROHM Semiconductor Group: SiCrystal GmbH), which in turn is not far from Vitesco Technologies’ headquarters at Regensburg.