This Month in Design007 Magazine: When Working Remotely, Cybersecurity Is a Necessity
July 9, 2020 | I-Connect007 Editorial TeamEstimated reading time: 3 minutes

When we started planning this issue on working remotely, we knew we’d have to speak with Stephen V. Chavez, chairman of the Printed Circuit Engineering Association (PCEA). He is a staff engineer and senior PCB designer at Collins Aerospace and a frequent contributor to Design007 Magazine. Steph’s company does a lot of ITAR work, which demands some of the tightest cybersecurity available. We recently asked Steph to discuss some of the security measures that his company employs and what his experience has been like since he began working out of his home office full-time several months ago.
Andy Shaughnessy: Welcome, Steph. You told me that your company employs a lot of cybersecurity measures. Tell us about that.
Steph Chavez: Yes, we do. For example, to log into this call, it took three different types of security measures to access it. One of them is an initial handshaking stage that takes place between my cellphone and computer to log in. Once I get past that certain coded handshake, then my regular log-in security kicks in. Next comes the final security stage. I’m now logging into a corporate VPN, which is another encryption in itself. There are so many barriers to cross just to get logged in and up and running these days. These little bits of time—two to five minutes here and there—add up; at the end of the day, you’ve spent about an hour waiting for the system to get past that encryption if you had to reboot more than once. Not only do these bits of time add up, but these security measures tend to slow down our software tools as well, due to all that is going on behind the scenes during your daily activities.
Shaughnessy: You already had this before the COVID-19. Have you had to add any new measures because of working at home?
Chavez: No. We are just more diligent. For example, we’re getting more protected emails, reminding us that we’re remote. For example, I’ve been working from home 100% of the time since May 11. I don’t have access to my personal printer at home due to the security measures in place. If I want to get access to my personal printer here at my home, I have to go to a certain install from my IT department. And if I choose to do that, the only way I can print is to be hard-wired in. It can’t be on the wireless network.
All our laptop USB drives are disabled for the most part. The USB readers are disabled. If you stick anything in there, it will reformat it. You can’t read anything. These measures were already in place before COVID-19, but it has forced us to sharpen our cybersecurity template that was always there.
Barry Matties: What about your internet connection? At home, are you on a VPN?
Chavez: That’s correct. I’m on a VPN. We’ve always had our VPN when working remotely. That was never an issue. Now, with COVID-19, everyone is working remotely all the time. For those of us on the West Coast, by the time we would log in, it would be either late morning or afternoon for the East Coast. It was difficult due to network overload. We were lucky to get in at all and on time. But the company quickly established another option for VPN. We adapted and created another VPN network, so now we have multiple options to get on. Now, it’s a non-issue.
To read this entire interview, which appears in the July 2020 issue of Design007 Magazine, click here.
Suggested Items
S&K Aerospace Awarded Major Contract Under DLA Maritime Acquisition Advancement Program
07/02/2025 | BUSINESS WIRES&K Aerospace, LLC has been awarded a significant contract under the Defense Logistics Agency’s (DLA) Maritime Acquisition Advancement Program, managed by the U.S. Naval Supply Command - Weapon Systems Support (NAVSUP WSS) in Mechanicsburg, PA.
Green Circuits to Exhibit Full-Service Electronics Manufacturing Solutions at 2025 SMD Symposium
07/02/2025 | Green CircuitsGreen Circuits, a full-service Electronics Manufacturing Services (EMS) partner to leading OEMs, is pleased to announce its participation in the 2025 SMD Symposium, taking place August 5-7 at the Von Braun Center in Huntsville, Alabama.
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
06/27/2025 | Nolan Johnson, I-Connect007While news outside our industry keeps our attention occupied, the big news inside the industry is the rechristening of IPC as the Global Electronics Association. My must-reads begins with Marcy LaRont’s exclusive and informative interview with Dr. John Mitchell, president and CEO of the Global Electronics Association. For designers, have we finally reached the point in time where autorouters will fulfill their potential?
Knocking Down the Bone Pile: Tin Whisker Mitigation in Aerospace Applications, Part 3
06/25/2025 | Nash Bell -- Column: Knocking Down the Bone PileTin whiskers are slender, hair-like metallic growths that can develop on the surface of tin-plated electronic components. Typically measuring a few micrometers in diameter and growing several millimeters in length, they form through an electrochemical process influenced by environmental factors such as temperature variations, mechanical or compressive stress, and the aging of solder alloys.
RTX, the Singapore Economic Development Board Sign MOU Outlining 10-year Growth Roadmap
06/20/2025 | RTXRTX and the Singapore Economic Development Board (EDB) have signed a Memorandum of Understanding (MoU) which outlines a 10-year roadmap to further long-term strategic collaboration in Singapore.