Flexible 7 inch Touch Panel with Integrated OLED Display Developed

Reading time ( words)

Electronic materials play a key role in touch panel technologies, such as new flexible touch technologies. Equally application know-how plays a vital part in the success of the new material to be used in device manufacture.  

Together with ITRI, Taiwan, Heraeus, demonstrated the integration of Clevios™ conductive polymer based touch panel with AM OLED technology in a highly flexible device. The device was prepared using Clevios™ PEDOT conductive polymer material (formulated by EOC, Taiwan) patterned on ITRI's FlexUp™ substrate. Solution processable and printable Clevios™ PEDOT: PSS is used as the transparent electrode in this device. In the project a 7 inch flexible Touch Panel / AM OLED device was produced.  

Heraeus has been collaborating with ITRI since 2013. "In this latest development project with ITRI, we have produced a reliable, flexible, advanced touch panel and integrated it with an AM OLED display, opening up new possibilities in flexible, foldable and wearable technologies" says Dr. Stephan Kirchmeyer, Global Marketing Director for the Display & Semiconductor Business at Heraeus. Dr. Janglin Chen, Vice President and General Director of ITRI's Display Technology Center added, "The co-operation with Heraeus has shown the options for touch panel makers are broader than just metallic based ITO-alternatives." Further projects with the ITRI Group and Heraeus in the application of displays are ongoing.  

Flexibility: Device durability confirmed after 10,000 cycle bending test.  

The touch sensor electrodes are based on a Clevios™ PEDOT. The experts at ITRI subsequently patterned the film using Heraeus invisible etch technology. A key element is flexibility which was tested 10,000 times at a bending radius of 5 mm. The touch panel is laminated on the AM OLED display. The final product has 5 interactive functions within the display including touch controllable zoom in/out and rotation functions.  

The Clevios™ PEDOT:PSS range from the Display & Semiconductor Business Unit of Heraeus consists of materials for antistatic through to highly conductive applications. Materials are modified for their application method, usually printing or coating, and for their end application requirements. Typically Clevios™ coatings can reach 100 -250 Ohm/sq. at a transparency of 90% (excluding substrate film). Clevios™ is increasingly finding applications in touch panels and sensors, as well as OLEDs, organic solar cells and security coatings. 



Suggested Items

Brittle Pals Bond for Flexible Electronics

05/13/2019 | Rice University
Mixing two brittle materials to make something flexible defies common sense, but Rice University scientists have done just that to make a novel dielectric. Dielectrics are the polarized insulators in batteries and other devices that separate positive and negative electrodes. Without them, there are no electronic devices.

Graphene-based Transparent Electrodes for Highly Efficient Flexible OLEDs

06/06/2016 | KAIST
The arrival of a thin and lightweight computer that even rolls up like a piece of paper will not be in the far distant future. Flexible organic light-emitting diodes (OLEDs), built upon a plastic substrate, have received greater attention lately for their use in next-generation displays that can be bent or rolled while still operating.

Copyright © 2021 I-Connect007. All rights reserved.