Robots: Eliminating the First Contact with an Enemy Force
March 8, 2016 | U.S. ArmyEstimated reading time: 4 minutes
![](https://iconnect007.com/application/files/6116/3121/8572/UAV.jpg)
"We should be thinking about having a robotic vanguard, particularly for maneuver formations," said Dr. Bob Sadowski. "There's no reason why the first contact with an enemy force should be with a man-platform, because it means that platform is at the greatest risk."
Sadowski, the Army's chief roboticist at U.S. Army Tank Automotive Research Development and Engineering Center, or TARDEC, in Warren, Michigan, spoke at a robotics conference here, March 2.
A robot doesn't feel pain and suffering if it gets blown up, he continued. "We want it to be the bullet catcher who takes those rounds."
Besides taking the hit, robots could pinpoint and uncover the direction from which the enemy is firing, he added.
Realizing that the enemy is also developing these systems, he said. "So if we don't play in this space, we're not even going to understand what the enemy is doing."
WHERE WE'RE AT
Over the last 10 years, the Army has focused on logistical challenges in Iraq and Afghanistan, Sadowski said. A lot of Soldiers were lost in convoys that encountered improvised explosive devices and the funding and research went into stopping that.
The Army's demonstration of driverless vehicles took place in May 2014 at the Department of Energy's Savannah River Site in South Carolina, where a convoy consisting of seven different tactical vehicles drove completely unmanned at speeds exceeding 40 mph.
Once that technology matures and is fielded, the problem is that "if you replace 16 drivers with 16 autonomous vehicles, you've just lost 16 M-16s that the drivers would be carrying to protect the convoy," Sadowski said, "So you'd need to consider arming the autonomous vehicles, with a Soldier being the remote triggerman."
Possibly by the end of this year, that experiment at Savannah River will morph into an extended warfighter experiment, or, an Army warfighter assessment at Fort Bliss, Texas, he added.
WHERE WE'RE GOING
Today, the effort is still in logistics, but current thinking and doctrine is that robots should be more than logistics; they should be in the fight as well, he said.
The Marines tried this with a robot in Afghanistan, a mule-like device that followed a patrol dismounted, he said. It was rated for 1,000 pounds but the Marines loaded it up with 2,000. Then they complained it was too slow.
So in the future, Sadowski said perhaps robots need to be able to talk back and say, "Sir, I can't carry that."
Currently, testing of vehicles is being done on-road, but off-road is where Soldiers fight, he said.
Future robotic development may go to warp speed by using modeling and simulation, saving time and money by plugging scenarios into computers and testing vehicles in dirt, mud, snow, sand, rain and so on, he said.
To get a peek at the future, look at what's being done already, he said. The Army teamed with Sikorsky and Lockheed Martin to rig a UH-60D helicopter to fly autonomously carrying a robot as its payload. It flew without the aid of a pilot to its destination, dropped off the robot and flew back.
Had it had problems along the way, say with its engine, a sensor was programmed to look for possible landing sites along the way. As well, the robot payload, which was slingloaded, was balanced by the computer , which gave it even more stability in-flight than a pilot could have done, he said.
Page 1 of 2
Suggested Items
Airbus to Lead NATO Next Generation Rotorcraft Capability Concept Study
07/26/2024 | AirbusThe NATO Support and Procurement Agency (NSPA) has awarded a contract to Airbus Helicopters to lead a concept study in the frame of the Next Generation Rotorcraft Capability (NGRC) project under which the participants combine efforts to work on design, development and delivery of a medium multi-role helicopter.
Innovative and Cost-effective BGA Re-balling
07/23/2024 | Shavi Spinzi, Nano Dimension/EssemtecA new, high-quality BGA re-balling process, which is integrated into an all-in-one solution of dispensing and placement equipment developed by Essemtec, brings new opportunities for the reapplication of expensive BGA components. This new method seamlessly integrates the sequence of flux deposition and ball (sphere) placement with the subsequent soldering process.
SEMI Applauds U.S. Chips Act Award For Entegris Semiconductor Materials Facility in Colorado
07/01/2024 | SEMISEMI, applauded the United States Department of Commerce's announcement of a Preliminary Memorandum of Terms for an award under the CHIPS and Science Act to support Entegris construction of a state-of-the-art manufacturing center for advanced materials and process solutions for leading-edge semiconductors in Colorado Springs, Colorado.
Lockheed Martin Celebrates Opening Of 122,000-Square Foot, $18M Engineering Facility In North Alabama
05/31/2024 | Lockheed MartinLockheed Martin, U.S. Department of Defense, state and local officials celebrated the opening of the company’s new $18 million engineering facility, labs and demonstration center in Huntsville. The 122,000-square foot facility has space for 500 employees who will advance national security capabilities and drive innovation in North Alabama.
RTX's Collins Aerospace Awarded Survivable Airborne Operations Center Subcontract
05/27/2024 | RTXCollins Aerospace, an RTX business was awarded a multi-billion-dollar subcontract as part of a team led by SNC to design, develop and deliver systems and products for a new aircraft under the U.S. Air Force's Survivable Airborne Operations Center (SAOC) program.