It’s Only Common Sense: Invest in Yourself—You’re Your Most Important Resource
Dan's Biz Bookshelf: 'Revenge of the Tipping Point'
Marcy's Musings: Engineering Economics
All About Flex: Flex Circuit Specifications for Commercial and Military Applications
September 30, 2016 | Dave Becker, All FlexEstimated reading time: 1 minute
Applications across the various markets for printed circuit boards can have significantly different specifications and performance requirements. Circuits for toys and games logically have lower performance requirements than those used in medical devices. IPC-6013 is an industry-driven specification that defines the performance requirements and acceptance features for flexible printed circuit boards.
This specification was drafted to recognize the differences in performance requirements for different applications. Three classes of performance and acceptance requirements have been created in it: Class 1, Class 2 and Class 3. Class 3 specifies the most stringent set of requirements and is used to specify quality requirements for products requiring the highest level of reliability. Class 3 requirements are often specified in applications for the Department of Defense (DoD), aerospace, and medical devices.
While IPC 6013 Class 3 is often used to specify flex circuits for military applications, MILP-50884 and MIL-PRF-31032 are two military documents also being used. These three different specifications define performance requirements for essentially the same applications and, in fact, there is significant redundancy and often confusion regarding how to properly specify product for military applications. To understand how things got to where they are today requires a review of some history.
Background The evolution of flexible circuit military specifications can be associated with the legendary story about the $600 toilet seat. In the 1980s during Reagan’s presidency, the U.S. was embarking on a major expansion in the size and capabilities of the U.S. forces. Defense spending increased dramatically, which had some political ramifications. In the mid-1980s, the Project on Government Oversight reported the Pentagon was dramatically overpaying for commercially available items. Notable examples used were a $435 hammer and a $600 toilet seat.
In response, President Reagan created a commission, headed by David Packard, to study the procurement practices of the DoD. The basic findings of the commission were that there was no rational system for specifying and procuring products. Extremely high costs were due to overly rigid specifications created by overly complicated organizations (Source). The results of these findings drove a number of efforts to simplify government procurement processes. One of these efforts was to specify commercial off-the-shelf products (COTS) when possible. Specifically, the military started to look at specifications used for commercial product as at least a guide in developing procurement specifications.
Editor's Note: This article originally appeared in the September 2016 issue of The PCB Magazine.
Share on:
Suggested Items
VORAGO Technologies, Collabora Partner to Advance Open Source in Space
11/25/2024 | GlobeNewswireVORAGO Technologies, a leading provider of radiation hardened and radiation tolerant MCUs and MPUs for Aerospace and Defense, and Collabora, a leader in open source software and support, announced they are partnering to advance the use of open source to achieve resilience for mission critical applications in space.
Aeluma Secures NASA Contract to Advance Quantum Dot Photonic Integrated Circuits for Aerospace and AI Applications
11/25/2024 | ACCESSWIREAeluma, Inc., a semiconductor company specializing in high-performance, scalable technologies for mobile, automotive, AI, defense and aerospace, communication and quantum computing, announced it has been awarded a contract by NASA to develop quantum dot photonic integrated circuits (PICs) on silicon.
AirBorn Announces Agreement to be Acquired by Molex
11/18/2024 | PRNewswireAirBorn, a global manufacturer of high reliability electronics and components, announced it has entered into an agreement to be acquired by Molex, a leading global connectivity and electronics solutions provider.
RTX's Collins Aerospace to Provide UK Chinook Helicopters with Interoperable Avionics System
11/12/2024 | RTXCollins Aerospace, an RTX business, has received a $19 million contract from the Department of Defense to equip a fleet of new H-47 Chinooks for the UK Royal Air Force with its Common Avionics Architecture System (CAAS) avionics management suite.
Lockheed Martin Skunk Works, the Royal Netherlands Aerospace Centre (NLR) Announce Strategic Collaboration
10/21/2024 | Lockheed MartinSkunk Works®, the renowned advanced development organization within Lockheed Martin Corporation and the Royal Netherlands Aerospace Centre (NLR), a premier knowledge institute and connecting link among science, industry, and government in the Netherlands, announced a strategic collaboration to advance mutual interests for enhanced security at the Netherlands Defense Industry Days event.
Copyright © 2024 I-Connect007 | IPC Publishing Group Inc. All rights reserved.
Log in