-
- News
- Books
Featured Books
- pcb007 Magazine
Latest Issues
Current IssueThe Hole Truth: Via Integrity in an HDI World
From the drilled hole to registration across multiple sequential lamination cycles, to the quality of your copper plating, via reliability in an HDI world is becoming an ever-greater challenge. This month we look at “The Hole Truth,” from creating the “perfect” via to how you can assure via quality and reliability, the first time, every time.
In Pursuit of Perfection: Defect Reduction
For bare PCB board fabrication, defect reduction is a critical aspect of a company's bottom line profitability. In this issue, we examine how imaging, etching, and plating processes can provide information and insight into reducing defects and increasing yields.
Voices of the Industry
We take the pulse of the PCB industry by sharing insights from leading fabricators and suppliers in this month's issue. We've gathered their thoughts on the new U.S. administration, spending, the war in Ukraine, and their most pressing needs. It’s an eye-opening and enlightening look behind the curtain.
- Articles
- Columns
- Links
- Media kit
||| MENU - pcb007 Magazine
Patty’s Perspective: Take Me to Your Leader
October 26, 2016 | Patty Goldman, I-Connect007Estimated reading time: 4 minutes

“You cannot lead where you do not go.” – Good Earth teabag, author unknown
We must have touched a real hot button when we decided to do this issue on leadership. When we sent out our survey on the topic, we received a lot of responses, which we’ll review in a separate article, plus many of our regular columnists were inspired to write on the subject.
So if you are looking to become a leader in your company or even a better manager, or even just a better person, this month’s issue is definitely for you. You have the opportunity to benefit from the wealth of experiences of our contributors, as nearly everyone offers up real life examples—and no two are the same.
Or if you are a tried and true techie with no such desire to “move on up,” read on anyhow— you will still learn plenty and not just about being a leader or manager. Our features contain plenty of opportunities to lead that do not involve your day job. Most, if not all, of this issue applies to every aspect of work and play (think teams and coaching), plus there are plenty of life lessons in here too.
We have quite the line-up for you, plus a few technical columns at the end to keep everyone happy. First, about that survey… I-Connect007’s Research Team presents and analyzes the results. It’s amazing the things you learn from open-ended questions. We throw in quite a few quotes from you, our readers, as you really do say it best.
Our first article is by Yash Sutariya of Saturn Electronics/Saturn Flex and he is writing on lessons in leadership he learned from his father Nagji, who recently passed away. It is both instructive and poignant—I just wish that in my earlier sales travels I had had the opportunity to get to Saturn and meet Nagji.
Next, Dave Dibble of Dibble Leaders discusses the results of the 10-question Biz Brain IQ survey that has been in our magazines for the past few months. The results, and Dave’s analysis, include the “correct” responses and how the scoring process. Missed it? Then check out the test page and take it before reading his article.
It’s not always easy for busy people to find time to author a column or article for us, even when you just know they are the right person for it. But IPC President John Mitchell was pleased to provide us with six totally practical lessons in leadership from his experiences in the electronics industry. Something to take to the bank, so to speak. And they are definitely for everyone. John is also going to be our newest columnist, so we can all look forward to more wisdom from him.
Next, I am very pleased to have our Brazilian columnist Renato Peres of Circuibras center his column around the 2016 Summer Olympics and lessons he learned about leadership from a few of the outstanding athletes. Como apropriado!
Regular columnist Todd Kolmodin of Gardien Services USA departed from his usual testing topics to write on the basic differences between leaders and managers. His perspective is interesting and thought-provoking.
Sam Sangani of PNC Inc. talks about the people element—your most valuable resource—of leadership. He explores three valuable aspects of good leadership centered on one’s employees. Next, Steve Williams of The Right Approach Consulting shares three personal experien ces that helped him transition from manager to leader. He alludes to more lessons learned, so perhaps we can tease some of those out of him over the next few months.
Happy Holden has contributed a column from his Essential Skills series, a 10-step business plan process for use by engineers or others wishing to present a new idea or product to management. Happy used the process himself during his tenure at HP.
And now to some good technical info to round out this issue. Mike Carano of RBP Technology discusses troubleshooting roughness or nodules found after copper electroplating. I hope you are all collecting Mike’s articles into a nice guide for your plating department.
Engineers, and I suppose others, feel a great need to solve problems, often on their own—it’s a sort of challenge to them. But in his column, Keith Sellers with NTS-Baltimore exhorts us to make use of the extensive knowledge already out there. In particular, he cites IPC conferences and meetings, as well as IPC’s Validation Services and the Defense Logistics Agency as sources of knowledgeable people.
We’re making it a tradition to wrap up each issue with marketing guru Barry Lee Cohen of Launch Communications. This month, BLC discusses trade shows as a part of your marketing plan. Very appropriate, as the season is almost upon us.
Next month it’s back to technical when we focus on all things vias. You think you know all about them? Think again! Don’t miss out— subscribe now and you will have it in your virtual mailbox the day it publishes.
Patricia Goldman is a 30+ year veteran of the PCB industry, with experience in a variety of areas, including R&D of imaging technologies, wet process engineering, and sales and marketing of PWB chemistry. Active with IPC since 1981, Goldman has chaired numerous committees and served as TAEC chairman, and is also the coauthor of numerous technical papers. To contact Goldman, click here.
Suggested Items
Trouble in Your Tank: Can You Drill the Perfect Hole?
07/07/2025 | Michael Carano -- Column: Trouble in Your TankIn the movie “Friday Night Lights,” the head football coach (played by Billy Bob Thornton) addresses his high school football team on a hot day in August in West Texas. He asks his players one question: “Can you be perfect?” That is an interesting question, in football and the printed circuit board fabrication world, where being perfect is somewhat elusive. When it comes to mechanical drilling and via formation, can you drill the perfect hole time after time?
The Evolution of Picosecond Laser Drilling
06/19/2025 | Marcy LaRont, PCB007 MagazineIs it hard to imagine a single laser pulse reduced not only from nanoseconds to picoseconds in its pulse duration, but even to femtoseconds? Well, buckle up because it seems we are there. In this interview, Dr. Stefan Rung, technical director of laser machines at Schmoll Maschinen GmbH, traces the technology trajectory of the laser drill from the CO2 laser to cutting-edge picosecond and hybrid laser drilling systems, highlighting the benefits and limitations of each method, and demonstrating how laser innovations are shaping the future of PCB fabrication.
Day 2: More Cutting-edge Insights at the EIPC Summer Conference
06/18/2025 | Pete Starkey, I-Connect007The European Institute for the PCB Community (EIPC) summer conference took place this year in Edinburgh, Scotland, June 3-4. This is the third of three articles on the conference. The other two cover Day 1’s sessions and the opening keynote speech. Below is a recap of the second day’s sessions.
Day 1: Cutting Edge Insights at the EIPC Summer Conference
06/17/2025 | Pete Starkey, I-Connect007The European Institute for the PCB Community (EIPC) Summer Conference took place this year in Edinburgh, Scotland, June 3-4. This is the second of three articles on the conference. The other two cover the keynote speeches and Day 2 of the technical conference. Below is a recap of the first day’s sessions.
Preventing Surface Prep Defects and Ensuring Reliability
06/10/2025 | Marcy LaRont, PCB007 MagazineIn printed circuit board (PCB) fabrication, surface preparation is a critical process that ensures strong adhesion, reliable plating, and long-term product performance. Without proper surface treatment, manufacturers may encounter defects such as delamination, poor solder mask adhesion, and plating failures. This article examines key surface preparation techniques, common defects resulting from improper processes, and real-world case studies that illustrate best practices.