New Hybrid Technology for Diagnosis and Treatment of Strokes to Be Developed
December 13, 2016 | FAUEstimated reading time: 3 minutes
FAU has demonstrated its strength in research once again: the University is conducting a new research project together with Siemens Healthcare GmbH, Universitätsklinikum Erlangen and other European partners in which researchers will develop an innovative hybrid device that combines different medical imaging technologies and will help stroke patients in particular to receive quicker diagnosis and treatment.
The project is being funded by the European Institute of Innovation and Technology for Health (EIT Health), a publicly financed initiative that aims to ensure sustainable development of innovative health care solutions. The project ‘Predictive Prevention and Personalized Interventional Stroke Therapy – P3 Stroke’ is one of only two in Germany and eight in Europe to receive funding.
EIT Health connects successful regional clusters with international networks of excellent universities, institutes, university hospitals and commercial research centres through the European research and innovation framework programme Horizon 2020. Over 140 companies, research institutions and universities from across Europe collaborate on a diverse range of projects as part of EIT Health; FAU and Siemens Healthineers are among the key partners.
The initiative will receive around 80 million euros of annual funding over the next seven years. Thanks to these resources, EIT Health is able to develop innovative products, educational programmes and services that will help Europe to deal with the challenges of demographic change.
To receive sought-after funding from EIT Health, a group of partners must submit a high-quality project. Prof. Dr. Dr. Jürgen Schüttler, Dean of FAU’s Faculty of Medicine, is delighted that this was achieved with the P3 Stroke project: ‘The project strengthens the connection between the University, Universitätsklinikum Erlangen and partners in industry such as Siemens Healthineers, a collaboration that meets the highest standards in Europe.’
Time is brain – faster treatment for stroke patients
‘With the P3 Stroke project we want to improve the diagnosis and interventional treatment of strokes on a fundamental level by combining the use of magnetic resonance imaging and angiography,’ explains Dr. Heinrich Kolem, CEO of Advanced Therapies at Siemens Healthineers.
Conducting separate examinations using different devices takes time, particularly due to the need to transfer patients between locations. This is valuable time that stroke patients do not have. As an average of 2 million neurons are destroyed every minute, every minutes counts during efforts to prevent major damage after a stroke. In collaboration with Siemens Healthineers, the team of researchers led by Prof. Dr. Arnd Dörfler, head of the Department of Neuroradiology at Universitätsklinikum Erlangen, and Prof. Dr. Andreas Maier, head of the Pattern Recognition Lab at FAU, now want to combine two imaging techniques, magnetic resonance imaging and angiography. This innovative approach will be used for diagnosis and immediate treatment, reducing the time needed for patient transfers and saving valuable time when treating stroke patients.
‘The pioneering system enables an exact picture of the development of the condition to be obtained without delay, allowing for effective treatment,’ Professor Dörfler says. While the clinical evaluation of the new methods will be led by the Department of Neuroradiology at Universitätsklinikum Erlangen in close collaboration with the Department of Neurology, the Pattern Recognition Lab is responsible for developing the software: ‘We have been conducting research in various areas of medical imaging for many years and can therefore contribute a considerable amount of expertise,’ Professor Maier explains.
Although the researchers see stroke patients as the main group who will benefit from the new technology, this does not mean that it will be limited to this area. ‘The system will also have applications in minimally invasive treatment for other neuro- and cardiovascular disorders and in oncology,’ Professor Dörfler says optimistically.
For Dr. Simone Reiprich, director of FAU’s Central Institute of Healthcare Engineering (ZiMT) and the University’s official representative in EIT Health’s international Partner Assembly, and Dr. Kurt Höller, director of Business Creation and a member of EIT Health’s Management Board, the fact that funding has been awarded for the project is further proof of the region’s significance in the field of medical technology: ‘The projects that EIT Health awards funding to are highly innovative and involve a high level of scientific expertise. Receiving this funding amid high competition is therefore a great success.’
Suggested Items
Inkjet Solder Mask ‘Has Arrived’
04/10/2024 | Pete Starkey, I-Connect007I was delighted to be invited to attend an interactive webinar entitled “Solder Mask Coating Made Easy with Additive Manufacturing,” hosted by SUSS MicroTec Netherlands in Eindhoven. The webinar was introduced and moderated by André Bodegom, managing director at Adeon Technologies, and the speakers were Mariana Van Dam, senior product manager PCB imaging solutions at AGFA in Belgium; Ashley Steers, sales manager at Electra Polymers in the UK; and Dr. Luca Gautero, product manager at SUSS MicroTec Netherlands.
NetVia Group Acquires Direct Imaging from Mivatek
04/09/2024 | Miva TechnologiesMiva Technologies is pleased to announce NetVia Group, Irving, TX has acquired a new Miva 2400NG Dual Tray Direct Imaging System with 30-micron capabilities for inner, outer and soldermask imaging.
Teledyne to Acquire Adimec
02/13/2024 | TeledyneTeledyne Technologies Incorporated announced that it has entered into an agreement to acquire Adimec Holding B.V. and its subsidiaries.
Real Time with... productronica 2023: MivaTek Global Advances Technology With High-res Imaging System
12/08/2023 | Real Time with...productronicaMivaTek's Brendan Hogan talks about how the company employs Digitally Adaptive Rasterization Technology (DART) in their high-res imaging equipment. He also shares how the blurred line between semiconductors and microelectronics is driving broader application of the imaging process.
Keysight Enables Validation of Arbe 4D Imaging Radar Chipset
11/30/2023 | Keysight Technologies, Inc.Keysight Technologies, Inc. announces that Arbe has selected the E8719A Radar Target Solution (RTS) to test the Arbe 4D imaging radar chipset for automotive applications.