National Wind Technology Center Begins First Validation of Wave Energy Conversion Device
January 16, 2017 | NRELEstimated reading time: 1 minute
The National Wind Technology Center (NWTC) at the Energy Department's National Renewable Energy Laboratory (NREL) has begun validation work on the first water power technology ever tested in an NREL dynamometer facility.
"Though designed to benefit the wind industry, the NWTC's large dynamometer facility is being leveraged to help advance new ocean energy technology," said NWTC Director Daniel Laird. "While still in the early stages of development, ocean energy is progressing rapidly. Over the coming decades, ocean energy could become a major source of electricity powering high-population-density areas near the coasts."
NREL is working with Columbia Power Technologies' StingRAY wave energy converter. Designed to deliver electricity at a competitive cost while having a low environmental impact, its floats and generators convert the energy in ocean waves into electricity.
"We are testing the StingRAY at the NWTC because the core design is similar to a wind turbine-it is direct drive, but with a very large diameter," Columbia Power Technologies CEO Reenst Lesemann said. "The dynamometer can mimic the sea, with back-and-forth oscillation, and will put the generator through its paces to ensure it can withstand ocean forces."
Mechanical testing of the StingRAY generator, which is as tall as a two-story building and the largest generator ever tested in an NWTC dynamometer, is now under way. Over the next few months, the unit will be connected to the NWTC's Controllable Grid Interface for electrical performance characterization.
"We have one of the only facilities in the country with a dynamometer that can apply rotational torque at the speeds and forces required while also applying non-torque loads-which are side forces that simulate the action of a rogue wave hitting a wave energy converter in the ocean," said Mark McDade, NWTC project manager. "This matters because the structures of these energy conversion devices must be designed to handle the side forces without damage. The work is pioneering in the field of ocean energy conversion." This land-based validation effort, which is co-sponsored by Columbia Power Technologies and the Department of Energy's Water Power Technologies Office, will occur prior to an open-water demonstration of the system scheduled for 2017 at the U.S. Navy's Wave Energy Test Site in Hawaii.
NREL is the U.S. Department of Energy's primary national laboratory for renewable energy and energy efficiency research and development. NREL is operated for the Energy Department by The Alliance for Sustainable Energy, LLC.
Testimonial
"Advertising in PCB007 Magazine has been a great way to showcase our bare board testers to the right audience. The I-Connect007 team makes the process smooth and professional. We’re proud to be featured in such a trusted publication."
Klaus Koziol - atgSuggested Items
ASM Technologies Limited signs MoU with the Guidance, Government of Tamilnadu to Expand Design-Led Manufacturing capabilities for ESDM
09/15/2025 | ASM TechnologiesASM Technologies Limited, a pioneer in Design- Led Manufacturing in the semiconductor and automotive industries, announced signing of Memorandum of Understanding (MoU) with the Guidance, Government of Tamilnadu whereby it will invest Rs. 250 crores in the state to expand its ESDM related Design-Led Manufacturing and precision engineering capacity. ASM Technologies will acquire 5 acres of land from the Government of Tamilnadu to set up a state-of-the-art design facility in Tamil Nadu's growing technology manufacturing ecosystem, providing a strong strategic advantage and long-term benefits for ASM.
MEMS & Imaging Sensors Summit to Spotlight Sensing Revolution for Europe’s Leadership
09/11/2025 | SEMIIndustry experts will gather November 19-20 at the SEMI MEMS & Imaging Sensors Summit 2025 to explore the latest breakthroughs in AI-driven MEMS and imaging optimization, AR/VR technologies, and advanced sensor solutions for critical defence applications.
Dymax Mexico to Showcase Light-Curing Technologies at SMTA Guadalajara Expo & Tech Forum 2025
09/05/2025 | DymaxDymax, a global manufacturer of rapid light-curing materials and equipment, will participate in SMTA Guadalajara Expo & Tech Forum, taking place September 17-18, 2025, at the Guadalajara Expo Center in Guadalajara, Jalisco, Mexico.
Kris Moyer Discusses His Emerging Design Technologies Class
09/04/2025 | Marcy LaRont, I-Connect007Kris Moyer, a design instructor for the Global Electronics Association, will be teaching his advanced PCB design class this fall. If you’re ready to level up your design education, you won’t want to miss this interview. The PCB Design for Emerging Design Technologies course is designed to provide the skills necessary to create PCB/PBA designs that require cutting-edge emerging design technologies and comply with all necessary IPC standards, including new standards being developed in this area.
TTM Technologies: Bridging East and West with Strategic Expansion
08/25/2025 | Marcy LaRont, I-Connect007As global supply chains shift and demand for supply chain resiliency grows, TTM Technologies is expanding with purpose: bolstering its U.S. presence while maintaining a strong footprint in Asia. With recent moves in Wisconsin and Malaysia, the company is positioning itself to better support customers amid an evolving geopolitical landscape. In this interview, President and CEO of TTM Technologies Tom Edman discusses TTM’s expansion strategy, the future of manufacturing, and his planned retirement after his long tenure at the helm of the company.