It’s Only Common Sense: Invest in Yourself—You’re Your Most Important Resource
Dan's Biz Bookshelf: 'Revenge of the Tipping Point'
Marcy's Musings: Engineering Economics
Crucial Considerations for Building Flexible Heaters
April 12, 2017 | John Talbot, Tramonto CircuitsEstimated reading time: 1 minute
Introduction
An electronic heater is created by driving electric current through a resistive element. As the current is drawn through the element, some of the energy is expelled as heat. That heat can then be transferred to other surfaces with positive effects. It is a convenient way to keep components above damaging temperatures or to heat surfaces to a specified temperature and keep them there. Some of the first heaters were simple nickel-chromium wires attached to a power source and wrapped around a mass to transfer heat. This is effective, but not practical in all applications. Heaters that are designed on flexible material can be attached to flat surfaces, equipped with temperature sensing devices, and monitored constantly so that adjustments are possible as the ambient surroundings change. Two types of flexible heater material are common: silicon rubber and polyimide. This article will focus on flexible polyimide heaters.
Common Uses
Flexible heaters are used to keep components, typically microprocessors, at a consistent temperature in devices that are exposed to conditions that have varying temperatures. They are used to heat surfaces as well. For instance, the seat or steering wheel in your car. Biological samples are sometimes better analyzed at the typical body temperature for a human or animal. Batteries and electronics in aircraft that must operate normally at 30,000 feet above the earth are kept warm with flexible heaters.
Handheld electronics as well as ATMs that must operate accurately in cold climates will use flexible heaters to keep critical components in the specified temperature range. The uses are not trivial and one may say critical in many applications. No matter the product or what function it provides, flexible heaters are an important element in the electronics industry.
Design Criteria
For a flexible heater to be designed accurately, we must first understand several things:
- The material to be heated
- The temperature range of the product’s surroundings
- How fast the heat must be transferred to the material
To read the full version of this article which appeared in the March 2017 issue of The PCB Magazine, click here.
Share on:
Suggested Items
NTT, Olympus Joint Demonstration Shows IOWN APN's Low-latency Capability
11/21/2024 | JCN NewswireNTT Corporation and Olympus Corporation announced that, following the start of their joint experiment in March of the world’s first cloud endoscope system which processes endoscopic videos on the cloud, they jointly established a cloud endoscopy system utilizing the IOWN APN technology.
All Flex Solutions Adds Talent to Flexible Circuit Facilities
11/14/2024 | All Flex SolutionsAll Flex Solutions is excited to welcome John Letourneau as our Director of Facilities and Maintenance at our Flexible Circuit Centers of Excellence!
Flexible Circuit Technologies Announces Major Expansion of Capabilities & Resources
11/13/2024 | CNWFlexible Circuit Technologies (FCT), a global design and value add manufacturer of flexible circuits, heaters, and membrane switches based in Minneapolis, MN, announces the opening of FCT-Huizhou.
CACI Awarded $226 Million Task Order to Provide Expertise to the U.S. Southern Command Operations (USSOUTHCOM)
11/01/2024 | CACI International Inc.CACI International Inc announced that it has been awarded a five-year task order valued at up to $226 million to provide expertise to the U.S. Southern Command Operations (USSOUTHCOM).
CEE PCB to Exhibit at Electronica 2024
10/31/2024 | CEE PCBTom Yang, CEO of CEE PCB, has announced that his company will be exhibiting at this year’s electronica 2024 to be held in Munich, Germany from November 12th through the 15th at the Trade Faire Center Messe München.