Robotic Payload for RSGS Mission Moves to Next Phase of Development
August 21, 2018 | DARPAEstimated reading time: 2 minutes
DARPA has completed a major review milestone for its Robotic Servicing of Geosynchronous Satellites, or RSGS, program. Results from a recently completed preliminary design review showed that the robotic payload design – coupled with a spacecraft bus that space systems loral (SSL) is providing through a partnership agreement – is on track to fulfill a multi-year mission to service at least 20 commercial and government spacecraft in geosynchronous orbit (GEO).
Image Caption: Flight-scale manipulator arms on the robotic operations test-bed (ROTB) for the RSGS robotic payload are on display during the preliminary design review in July.
The technical challenges of servicing satellites in GEO are significant, but success could substantially revolutionize military and commercial space operations, lower satellite construction and deployment costs, and improve satellite lifespan, resilience, and reliability.
During the July review, the U.S. Naval Research Laboratory (NRL), selected by DARPA to build the robotic payload, presented critical design and integration products ranging from interface control documents to plans for testing and verification and validation. NRL has more than 15 years of experience in space robotics, focusing on control algorithms, system architectures, and robot laboratory testing facilities.
“The completion of the payload preliminary design review is a major milestone for the RSGS program. NRL was able to demonstrate that its payload design meets DARPA’s objectives and is compatible with the spacecraft bus being provided by SSL. We are well on our way to significantly improving the resiliency and functionality of government and commercial spacecraft in geosynchronous orbit,” said Joe Parrish, RSGS program manager in DARPA’s Tactical Technology Office.
Several program elements have advanced beyond the preliminary design review stage. Flight versions of two dexterous robotic manipulator arms, which will allow up-close inspection, repair, and installation of technical packages on the exterior of U.S. satellites, are in production and are expected to deliver in 2019. SSL is on track for the systems requirements review for the spacecraft bus in October of 2018. Launch of the RSGS robot servicing vehicle is targeted for 2021.
After DARPA completes an on-orbit checkout and demonstration phase, SSL would operate the vehicle and make cooperative servicing available to both military and commercial geosynchronous orbit satellite owners on a fee-for-service basis. In exchange for providing property to SSL, the government will obtain reduced-priced servicing of its satellites and access to commercial satellite servicing data throughout the operational life of the RSGS spacecraft.
The RSGS program shares characteristics with two other relevant programs. The first is the Consortium for Execution of Rendezvous and Servicing Operations (CONFERS), which DARPA sponsors with intent to transition to a permanent, self-sustaining, and independent forum where industry and government collaborate for on-orbit servicing. The second is NASA’s Restore-L mission, which aims to provide certain servicing options for satellites in low-Earth orbit. Team members across all three programs work together to share insights and lessons learned.
Suggested Items
Real Time with… IPC APEX EXPO 2024: Ventec Discusses New Pro-bond Family of Advanced Products
05/01/2024 | Real Time with...IPC APEX EXPOChris Hanson, Ventec's Global Head of IMS Technology, outlines the launch of four pro-bond formulas that deliver an outstanding combination of low dissipation factor (Df) with a dielectric constant (Dk) range to maximize the design window for critical PCB parameters. As Chris points out, Pro-bond is designed for low-loss, high-speed applications, while thermal-bond dissipates heat from a component through the board to a heat sink.
IPC's Vision for Empowering PCB Design Engineers
04/30/2024 | Robert Erickson, IPCAs architects of innovation, printed circuit board designers are tasked with translating increasingly complex concepts into tangible designs that power our modern world. IPC provides the necessary community, standards framework, and education to prepare these pioneers as they explore the boundaries of what’s possible, equipping engineers with the knowledge, skills, and resources required to thrive in an increasingly dynamic field.
On the Line With… Talks With Cadence Expert on SI/PI for PCB Designers
05/02/2024 | I-Connect007In “PCB 3.0: A New Design Methodology—SI/PI for PCB Designers,” subject matter expert Brad Griffin, Cadence Design Systems, discusses how an intelligent system design methodology can move some signal and power integrity decision-making into the physical design space, offering real-time feedback.
iNEMI Packaging Tech Topic Series: Role of EDA in Advanced Semiconductor Packaging
04/26/2024 | iNEMIAdvanced semiconductor packaging with heterogenous integration has made on-package integration of multiple chips a crucial part of finding alternatives to transistor scaling. Historically, EDA tools for front-end and back-end design have evolved separately; however, design complexity and the increased number of die-to-die or die-to-substrate interconnections has led to the need for EDA tools that can support integration of overall design planning, implementation, and system analysis in a single cockpit.
Cadence, TSMC Collaborate on Wide-Ranging Innovations to Transform System and Semiconductor Design
04/25/2024 | Cadence Design SystemsCadence Design Systems, Inc. and TSMC have extended their longstanding collaboration by announcing a broad range of innovative technology advancements to accelerate design, including developments ranging from 3D-IC and advanced process nodes to design IP and photonics.