-
- News
- Books
Featured Books
- pcb007 Magazine
Latest Issues
Current IssueIn Pursuit of Perfection: Defect Reduction
For bare PCB board fabrication, defect reduction is a critical aspect of a company's bottom line profitability. In this issue, we examine how imaging, etching, and plating processes can provide information and insight into reducing defects and increasing yields.
Voices of the Industry
We take the pulse of the PCB industry by sharing insights from leading fabricators and suppliers in this month's issue. We've gathered their thoughts on the new U.S. administration, spending, the war in Ukraine, and their most pressing needs. It’s an eye-opening and enlightening look behind the curtain.
The Essential Guide to Surface Finishes
We go back to basics this month with a recount of a little history, and look forward to addressing the many challenges that high density, high frequency, adhesion, SI, and corrosion concerns for harsh environments bring to the fore. We compare and contrast surface finishes by type and application, take a hard look at the many iterations of gold plating, and address palladium as a surface finish.
- Articles
- Columns
Search Console
- Links
- Media kit
||| MENU - pcb007 Magazine
FTG Achieves Record Q3 Sales of $25 Million
October 11, 2018 | Firan Technology Group CorporationEstimated reading time: 3 minutes
Firan Technology Group Corporation (TSX:FTG) today announced financial results for the third quarter 2018.
- Achieved record third quarter sales of $25 million, an increase of 31% over Q3 2017
- Grew circuits segment by 22% over Q3 last year
- Grew aerospace segment by 50% over Q3 last year
- Achieved $2.7M EBITDA, an increase of $0.9M over Q3 last year
- Grew Q3 2018 net income by 320% over same period last year
“The third quarter of 2018 came in as expected for the summer months, which typically experience a drop in sales from Q2 due to higher vacations and fewer production days,” stated Brad Bourne, president and chief executive officer. He added, “Sales and profitability were up dramatically from Q3 last year again demonstrating the transition activities are mostly behind us. We will continue to work on managing transition and one-time costs in our Chatsworth operations.”
Business Highlights
FTG accomplished many goals in the third quarter of 2018 that continue to improve the Corporation and position it for the future, including:
- Began shipments to Flight Safety International for the KC-46 simulator program
- Shipped first set of the redesigned cockpit control devices for the third test aircraft for the C919 program in China
- Completed qualification testing of the cursor control device for a helicopter program and are progressing through Transport Canada approval
- Completed qualification testing of a cockpit power supply for the LE-700 training aircraft in China
- Achieved sales resulting from the 2016 acquisitions of $5.4M versus our target of $5.5M
- Received Authorization to Proceed on a new military helicopter simulation program with an expected value between $1-2M USD
- Received our first ever patent for High Temperature Rigid Flex circuit board technology in the UK
- Won a contract to develop cockpit panels for the Orion manned spacecraft being developed for NASA
- Completed our first robotic automation project including Industry 4.0 technology at our Circuits Toronto facility
For FTG, overall sales increased by $5.9M or 30.6% from $19.1M in Q3 2017 to $25.0M in Q3 2018. Both the circuits and aerospace segments contributed to the growth. Also contributing to the growth was the weakening of the Canadian dollar by 2.5 cents in Q3 this year compared to the same period last year. For the year-to-date, sales were up $9.6M or 13.3% due to the above items plus the one time revenue recognition of $5M from the C919 program in Q1 2018.
The circuits segment sales were up $3.0M or 22.1% in Q3 2018 versus Q3 2017. On a year-to-date basis, Circuits sales were up by $1.3M or 2.8%.
For the Aerospace segment, sales in Q3 2018 were $8.6M compared to $5.7M in the same quarter last year resulting in a 50.6% growth rate. Year-to-date sales were up $8.3M or 31.4% in the Aerospace segment.
Gross margins in Q3 2018 were up $0.7M compared to Q3 2017. The benefit of increased sales and lower costs were partially offset by a $0.95M inventory provision in Aerospace Chatsworth against inventory acquired in the two acquisitions in 2016.
Earnings before interest, tax, depreciation and amortization (EBITDA) for FTG for Q3 2018 was $2.7M and $9.2M for the trailing twelve months.
Net profit after tax at FTG in Q3 2018 was $0.6M compared to a net profit of $0.1M in Q3 2017. Q3 2018 had higher sales, lower R&D spending, offset by an inventory provision increase of $0.95M.
The Circuits segment net earnings before corporate and interest and other costs was $3.0M in Q3 2018 compared to $1.7M in Q3 2017.
The Aerospace net earnings before corporate and interest and other costs in the quarter was ($0.7M) versus ($1.3M) in Q3 2017. Q3 2018 had an inventory provision increase of $0.95M.
As at August 31, 2018, the Corporation’s net working capital was $28.5M, an increase of $4.1M over year end 2017. Higher accounts receivables, inventory and lower bank debt and lower accounts payable was offset by higher customer deposits.
Net debt to EBITDA, was 0.9:1 for the trailing 12 month period.
About Firan Technology Group Corporation
FTG is an aerospace and defense electronics product and subsystem supplier to customers around the globe. FTG has two operating units:
FTG Circuits is a manufacturer of high technology, high reliability printed circuit boards. Our customers are leaders in the aviation, defense, and high technology industries. FTG Circuits has operations in Toronto, Ontario, Chatsworth, California and a joint venture in Tianjin, China.
FTG Aerospace manufactures illuminated cockpit panels, keyboards and sub-assemblies for original equipment manufacturers of aerospace and defense equipment. FTG Aerospace has operations in Toronto, Ontario, Chatsworth, California, Fort Worth, Texas and Tianjin, China.
Suggested Items
ICEFlight to Accelerate Maturation of Cryogenic Technologies for Hydrogen-Powered Flight
05/27/2025 | GKN AerospaceGKN Aerospace is one of the project partners in ICEFlight (Innovative Cryogenic Electric Flight), a project aiming to contribute to the development of hydrogen-powered flight.
Vertical Aerospace Makes Aviation History with Piloted eVTOL Flight in Open Airspace
05/27/2025 | BUSINESS WIREVertical Aerospace, a global aerospace and technology company that is pioneering electric aviation, announced it has made European aviation history with the first-ever piloted wingborne flight of a winged electric vertical take-off and landing (eVTOL) aircraft in open airspace.
Saab’s CEO Micael Johansson elected President of ASD
05/26/2025 | SaabThe Aerospace, Security and Defence Industries Association of Europe (ASD), has elected Saab CEO Micael Johansson as its new President and Chairman of the Board.
TT Electronics' Cleveland Ohio Facility Re-Certified to Aerospace and Defence Standards AS9100 and Nadcap
05/23/2025 | TT ElectronicsTT Electronics has successfully completed recertification of the Cleveland facility to AS9100 and Nadcap standards. This milestone underscores the company’s unwavering dedication to quality in manufacturing for the aerospace and defence sectors, a commitment proudly upheld for more than 15 years.
Federal Electronics Adds AS9100 Certification to Hermosillo, Mexico Facility, Expanding Aerospace & Defense Capabilities
05/20/2025 | Federal ElectronicsFederal Electronics, a leader in providing advanced electronic manufacturing services, has officially added AS9100 certification to its Hermosillo, Mexico facility, further aligning its operations with the quality standards required by the aerospace and defense industries.