Super Sensitive Sensor 'Tastes' and 'Sniffs'
March 14, 2019 | Technion-Israel Institute of TechnologyEstimated reading time: 3 minutes
Researchers from the Technion-Israel Institute of Technology in Haifa have developed an innovative sensing system capable of identifying and distinguishing different stimuli. The system is based on origami (the art of paper folding) combined with ink developed at the Technion.
The Israeli researchers have developed an innovative sensing system capable of identifying and distinguishing different stimuli. The research, just published in the journal Nature Communications, was led by Professor Hossam Haick of the Technion’s Wolfson Faculty of Chemical Engineering and the Russell Berrie Nanotechnology Institute, and Dr. Min Zhang, who did his post-doctoral fellowship with him. Dr. Zhang is currently an associate professor at East China Normal University.
“Today, there is significant demand for multi-purpose sensing systems for specific purposes,” said Prof. Haick. “These systems have great potential as applications in medicine, counterterrorism, food safety, environmental monitoring, ‘The Internet of things’ and more. The problem is that existing technologies, such as gas chromatography, have many disadvantages, including high cost.”
The challenge facing the researchers was to develop a single system sensitive enough to identify and distinguish among different stimuli. They say they developed a solution inspired by nature. “When we think about the human sensory system, we think of a whole that brings all the data to the brain in a format that it understands. That inspired our development, which is meant to concentrate in a different place all the environmental data we want to monitor. It is a multi-purpose sensory system that absorbs the stimuli and distinguishes among them.”
The system developed by Prof. Haick and Dr. Zhang, called “origami hierarchical sensor array” (OHSA), is an integrated array of grouped sensors written on the target object in conductive ink that the two scientists developed. It is a single device that demonstrates sensing abilities and detecting physical and chemical stimuli—temperature, humidity, light and volatile organic particles—at high resolution of time and space. Since it also distinguishes between isomers and chiral enantiomers (forms that are mirror images of each other), it paves new avenues for medical diagnosis. It is worth noting that volatile particle monitoring can be useful in a variety of areas including the diagnosis of disease and monitoring of dangerous substances.
There are many advantages to this unique ink – its low price, the ability to produce it in large quantities and the simplicity of its application on the target surfaces. The researchers conducted experiments that included control groups (other types of ink) and showed that the special ink attaches itself tightly to materials such as aluminum foil; glass; photo paper; Kapton tape (a polyimide film developed by DuPont in the late 1960s that remains stable across a wide range of temperatures and is used in, among other things, flexible printed circuits and thermal blankets used on spacecraft, satellites, and various space instruments; nitrile (the material used to make disposable gloves); and polydimethylsiloxane (PDMS, used to make contact lenses and for medical technologies and cosmetics).
The ink also allows writing on human skin and nails in a kind of conductive tattoo, waterproof—which may allow, for example, constant monitoring of relevant physiological variables. In addition, it can also be used on human skin and fingernails as a kind of water-resistant, conductive tattoo—which can make possible, for example, constant monitoring of relevant physiological variables.
“We can say that our system identifies the ‘fingerprints’ of chemical and physical stimuli and supplies information about them,” said Prof. Haick. Its low cost will make possible its application in many places, including poor areas, for medical and other uses.”
Optical Microscope images of composite made of melanin-analogous polydopamine and graphene, coating (a) paper; and (b) flexible substrate made of Kapton
Testimonial
"Our marketing partnership with I-Connect007 is already delivering. Just a day after our press release went live, we received a direct inquiry about our updated products!"
Rachael Temple - AlltematedSuggested Items
Nordson Electronics Solutions to Demonstrate Automated Fluid Dispensing and Selective Soldering Systems at productronica 2025
11/06/2025 | Nordson Electronics SolutionsNordson Electronics Solutions, a global leader in reliable electronics manufacturing technologies, will demonstrate their latest equipment for printed circuit board assembly and advanced packaging at Productronica 2025, joining their longstanding distribution partners Amtest Group, stand A2.532, and smartTec Gmbh, stand A2.527, as well as in the Future Packaging Hybrid Live Lab, stand B2.261.
Aismalibar, Technosystem Showcase Next-Generation PCB Solutions at productronica 2025
11/05/2025 | AismalibarBENMAYOR S.A., parent company of Aismalibar and Technosystem, will present its latest innovations in thermal management materials and PCB automation systems at Productronica 2025, the world’s leading trade fair for electronics development and production.
Learning With Leo: UHDI—The Next Leap in PCB Manufacturing
11/05/2025 | Leo Lambert -- Column: Learning With LeoHigh density interconnect (HDI) technology has been a cornerstone of miniaturized electronics since Hewlett-Packard introduced the first chip-scale implementation in 1982. Over time, HDI processes became central to organic flip-chip packaging in the semiconductor industry. Today, the convergence of IC substrates and system-level PCBs has accelerated the adoption of UHDI.
EIPC Technical Snapshot: Sustainability in Electronics Manufacturing
11/06/2025 | Pete Starkey, I-Connect007EIPC selected the highly topical issue of sustainability in electronics manufacturing for the 24th Technical Snapshot webinar on Oct. 29, with guest speakers Satoshi Konagai of Elephantech and Liisa Hakola of the VTT Technical Research Centre of Finland. The program was moderated by Kirsten Smit-Westenberg, executive director of EIPC, who also introduced each speaker.
UHDI Fundamentals: UHDI Technology and Automated Inspection
11/03/2025 | Anaya Vardya, American Standard CircuitsFollowing up on the last article on integrating ultra high density interconnect (UHDI) PCB technologies and Quality 5.0, here we will do a deeper dive into the automated inspection component. UHDI applications demand extreme precision, with line/space dimensions below 25 µm and microvias below 30 µm. Automated inspection systems are essential to achieving the defect-free fabrication required at these scales, and legacy automated inspection systems are becoming obsolete and ineffective.