Dan's Biz Bookshelf: 'Revenge of the Tipping Point'
Marcy's Musings: Engineering Economics
Punching Out: Should You Sell Your Company to a Private Equity Firm?
Growing Opportunities with 3D Printed Electronics
May 22, 2019 | Barry Matties, I-Connect007Estimated reading time: 1 minute
Dr. Kurt Christenson, senior scientist at Optomec, discusses the company’s Aerosol Jet technology, which eliminates the need for wire bonding by printing interconnects on 3D surfaces. Christenson also explores the current state of the technology and highlights the market segments and applications with the most to benefit from being able 3D print electronic components, such as resistors, capacitors, antennas, and transistors.
Barry Matties: Kurt, can you tell us a little bit about your company?
Dr. Kurt Christenson: Optomec makes additive manufacturing equipment. We have two divisions. One division makes a product called LENS that makes a melt pool in metal with a laser and then sprays powdered metal in to add material. When it cools and freezes, it follows the crystal structure, so we can repair a single crystal turbine blade or make full 3D metal parts. My part of the company makes a product called Aerosol Jet, which atomizes an ink. We don’t care what’s in the ink as long as we can make roughly three-micron droplets.
Then, we aerodynamically focus it down to a size where we can make from 10-micron lines to three-millimeter strips, depending on the need. My personal focus has been on connecting integrated circuits. We call it three-dimensional IC or 3D IC.
Matties: A while back, I did an interview with your colleague [Pascal Pierra] where we discussed printing on the wings of airplanes and such.
Christenson: Yes. That was the Aerosol Jet, which is my side of things. One of the things we do is print on aircraft wings. For instance, antennas on drone wings is a common interest that we get. A second would be heaters on specialty windows or headlight heaters.
To read the full version of this article which originally appeared in the April 2019 issue of Flex007 Magazine, click here.
Share on:
Suggested Items
Exploring Innovation Through Alternate Metals and Sputtering
11/11/2024 | Marcy LaRont, I-Connect007Dr. Evelyne Parmentier has a PhD in physical chemistry from ETH Zurich. She was born in Luxembourg and is now a proud resident of Switzerland, where she has been part of Dyconex’s R&D engineering team for the past two years. Evelyne gave a presentation at the EIPC Summer Conference titled “Functionalization of Printed Circuit Boards Through Introducing Alternate Metals Through Sputtered Layers,” where she asked her audience, “If there are 93 metals in the periodic table, why are we not using more of them?”
BWXT to Acquire L3Harris’ A.O.T. Business to Expand Special Materials Portfolio
11/05/2024 | L3Harris TechnologiesBWX Technologies, Inc. and L3Harris Technologies, Inc. announced the signing of a purchase agreement for BWXT to acquire L3Harris’ Aerojet Ordnance Tennessee, Inc. (A.O.T.) business for approximately $100 million.
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
11/01/2024 | Andy Shaughnessy, Design007 MagazineIt’s been a busy week in PCB design, fabrication, and assembly. We published some mixed news about the EMS segment, and an article about the supply chain. Are companies holding onto too much inventory? After the recent supply chain snafus, I can certainly understand why they might. We have an article about liquid metal ink, a cool new technology developed by LDQX, formerly known as Averatek. We also have an article about fighting advanced counterfeiting methods, and news about an acquisition by Siemens.
Unlocking Advanced Circuitry Through Liquid Metal Ink
10/31/2024 | I-Connect007 Editorial TeamPCB UHDI technologist John Johnson of American Standard Circuits discusses the evolving landscape of electronics manufacturing and the critical role of innovation, specifically liquid metal ink technology, as an alternate process to traditional metallization in PCB fabrication to achieve ever finer features and tighter tolerances. The discussion highlights the benefits of reliability, efficiency, and yields as a tradeoff to any increased cost to run the process. As this technology becomes better understood and accepted, even sought out by customers and designers, John says there is a move toward mainstream incorporation.
The Cost-Benefit Analysis of Direct Metallization
10/21/2024 | Carmichael Gugliotti, MacDermid AlphaCarmichael Gugliotti of MacDermid Alpha discusses the innovative realm of direct metallization technology, its numerous applications, and significant advantages over traditional processes. Carmichael offers an in-depth look at how direct metallization, through developments such as Blackhole and Shadow, is revolutionizing PCB manufacturing by enhancing efficiency, sustainability, and cost-effectiveness. From its origins in the 1980s to its application in cutting-edge, high-density interconnects and its pivotal role in sustainability, this discussion sheds light on how direct metallization shapes the future of PCB manufacturing across various industries, including automotive, consumer electronics, and beyond.