A Promising Step in Returning Bipedal Mobility
August 21, 2019 | CaltechEstimated reading time: 3 minutes
Engineers at Caltech have launched a new research initiative aimed at restoring natural and stable locomotion to individuals with walking deficiencies that result from spinal cord injuries and strokes.
This initiative, dubbed RoAM (Robotic Assisted Mobility), unites robotic assistive devices—including exoskeletons and prostheses—with artificial intelligence (AI)-infused neurocontrol. The RoAM initiative combines the research of two Caltech roboticists: Aaron Ames, who creates the algorithms that enable walking by bipedal robots and translates these to govern the motion of exoskeletons and prostheses; and Joel Burdick, whose transcutaneous spinal implants have already helped paraplegics in clinical trials to recover some leg function and, crucially, torso control.
A number of robotics companies have begun building exoskeletons—devices with robotic legs that a person can strap into—to provide mobility to individuals who are paralyzed from the waist down. The problem is that all of the current devices require the use of crutches to maintain stability.
"Bipedal walking is difficult to achieve in a stable fashion," says Ames, Bren Professor of Mechanical and Engineering and Control and Dynamical Systems in the Division of Engineering and Applied Science. "While crutches help users of the exoskeletons to stay upright, they undercut many of the health benefits that upright locomotion might otherwise provide. In addition, they do not allow users to do anything else with their hands while walking."
This is where the work of Ames and Burdick comes in.
Hear from Aaron Ames and Joel Burdick about their work on RoAM.
Ames has built programs that allow bipedal robots to walk, making them stable by applying methods from nonlinear control theory. His approach has resulted in efficient walking by humanoid robots, along with dynamic behaviors such as running and jumping. In collaboration with the French exoskeleton manufacturer Wandercraft and his colleague Jessy Grizzle from the University of Michigan, Ames has translated these methods from robots to powered lower-body exoskeletons. The end result was the first dynamic walking exoskeleton that could be used by paraplegics without the need for crutches. This has the potential to give paraplegics hands-free mobility, Ames says. In the future, coupling his work with spinal stimulation will enable direct feedback between the user and device.
Meanwhile Burdick, Richard L. and Dorothy M. Hayman Professor of Mechanical Engineering and Bioengineering and a research scientist at JPL, which Caltech manages for NASA, has been developing spinal implants that have restored some lower-body function to wearers in clinical trials.
The implant, developed in collaboration with Caltech biomedical engineer Yu-Chong Tai, Anna L. Rosen Professor of Electrical Engineering and Medical Engineering, and AI expert Yisong Yue, assistant professor of computing and mathematical sciences, provides electrical stimulation to the epidural space around the lower spinal cord while using AI to learn, in real time, the stimulation patterns that yield the best results for wearers. In clinical trials at UCLA, the prosthetic allowed paralyzed wearers to stand on their own for up to 20 minutes at a time and voluntarily move toes, ankles, knees, and hips.
One of the participants testing out the spinal stimulator also happened to own an exoskeleton, and so the researchers tested the two technologies together in a trial at UCLA three years ago. They found that when the spinal stimulator was turned on, the exoskeleton required half as much power to move the same distance as with the stimulator off.
"With the stimulator and the exosuit, he was almost stepping on his own," Burdick says. "That early study was very promising."
The RoAM initiative will explore the intersection of AI-infused spinal cord stimulation using a Wandercraft Atalante model exoskeleton located at Caltech. "The Atalante exoskeleton and the walking algorithms that we created for it are already good enough to allow users to walk dynamically without crutches," Ames says. "The RoAM initiative will let them do so using less power and for a variety of different dynamic walking behaviors, with the goal of improving the users' everyday lives."
Ultimately, the RoAM initiative will go beyond exoskeletons in exploring ways to restore mobility. The dynamic walking algorithms developed by Ames have already been translated to custom-built prostheses housed in his lab, including a powered leg for above-the-knee amputees. Additionally, soft exoskeletons—or exosuits—will be developed to help stabilize walking gaits for individuals who are not paralyzed but are mobility impaired.
The RoAM initiative is supported by Wandercraft, the Zeitlin Family Discovery Fund, and the Caltech Mechanical and Civil Engineering Big Ideas Fund.
Suggested Items
Siemens Unveils Next Generation AI-enhanced Electronic Systems Design Software
11/13/2024 | SiemensSiemens Digital Industries Software announced today the latest advancement in its electronic systems design portfolio. The next generation release takes an integrated and multidisciplinary approach, bringing together Xpedition™ software, Hyperlynx™ software and PADS™ Professional software into a unified user experience that delivers cloud connectivity and AI capabilities to push the boundaries of innovation in electronic systems design.
Happy’s Tech Talk #34: Producibility and Other Pseudo-metrics
11/12/2024 | Happy Holden -- Column: Happy’s Tech TalkAs an engineer, I thrive on data, and one of my favorite forms is metrics. However, the one metric that has always challenged me is producibility. I define this as more than just passing a DRC in CAM, but the entire envelope of “simplicity of design,” “suitability for test,” and many more. Yet, producibility seemed to be different for different engineers and we had no clear way to establish and define producibility other than opinion. When I worked at HP, the company invested in a methodology called design for manufacturing and assembly using the GE/Hitachi Methodology and Dewhurst-Boothroyd software. Finally, I had a methodology that created a producibility score.
The Quest for Perfect Products
11/11/2024 | Marcy LaRont, I-Connect007Anna-Katrina Shedletsky is a former Apple engineer who formed her own company, Instrumental, to address what she felt were frustrating and costly engineering problems and inefficiencies at Apple. She’s passionate about her quest to build perfect products faster than ever before. In this interview, Anna shares her journey from creating innovative products like the Apple Watch to addressing the complexities of failure analysis in manufacturing. She also discusses an upcoming educational webinar she is hosting with Valentina Ratner, CEO of AllSpice.io, for engineering leaders in the manufacturing space. They look forward to providing “real talk” and value to their engineering colleagues.
Cicor Expands into Sweden with Plans to Strengthen Market Position in Germany
11/08/2024 | CicorCicor Group has acquired the Swedish development company Nordic Engineering Partner AB and thus establishes a significant presence in the Nordics. Additionally, Cicor is in advanced negotiations to acquire another German EMS provider.
Root-cause Analysis and Problem-solving
11/01/2024 | Happy Holden, I-Connect007An essential skill for any process engineer in printed circuit fabrication is the ability to conduct root-cause analysis (RCA) and problem-solving. These are related to TQC and Six Sigma applications and are essential for customer support and continued profitability. All engineers will encounter these methods sooner or later, but it will likely be sooner if you are in product or process engineering in manufacturing.