-
- News
- Books
Featured Books
- pcb007 Magazine
Latest Issues
Current IssueIn Pursuit of Perfection: Defect Reduction
For bare PCB board fabrication, defect reduction is a critical aspect of a company's bottom line profitability. In this issue, we examine how imaging, etching, and plating processes can provide information and insight into reducing defects and increasing yields.
Voices of the Industry
We take the pulse of the PCB industry by sharing insights from leading fabricators and suppliers in this month's issue. We've gathered their thoughts on the new U.S. administration, spending, the war in Ukraine, and their most pressing needs. It’s an eye-opening and enlightening look behind the curtain.
The Essential Guide to Surface Finishes
We go back to basics this month with a recount of a little history, and look forward to addressing the many challenges that high density, high frequency, adhesion, SI, and corrosion concerns for harsh environments bring to the fore. We compare and contrast surface finishes by type and application, take a hard look at the many iterations of gold plating, and address palladium as a surface finish.
- Articles
- Columns
Search Console
- Links
- Media kit
||| MENU - pcb007 Magazine
Electronics Manufacturing Supports More Than 5.3 Million U.S. Jobs and Almost 4% of U.S. GDP, Says IPC
May 13, 2020 | IPCEstimated reading time: 3 minutes

Electronics manufacturing contributes powerfully to the U.S. economy, according to a new report released by IPC, the global electronics manufacturing industry association. The report finds the electronics manufacturing sector directly supports more than 1.3 million U.S. jobs. For every U.S. electronics manufacturing job, three other jobs are supported in the U.S. economy, contributing to a total of 5.3 million American jobs. Also, the industry indirectly and directly contributes $714 billion (3.7%) to U.S. GDP.
“Electronics are at the heart of thousands of products and hundreds of industries in the U.S.,” said John Mitchell, president and CEO of IPC. “More than most industries, we are vertically and horizontally integrated across many markets, and the health of our industry is key to the overall success of the U.S. economy.”
The report also finds 16 states, led by California and Texas, account for about 75% of direct electronics manufacturing jobs in the United States. California alone has nearly 275,000 direct electronics manufacturing jobs and almost $197 billion in direct output, accounting for 3.4% of California’s GDP.
Other key findings from the report include:
- The electronics manufacturing industry is responsible for more than $1 trillion dollars in the content of final sales, spread across business investment and inventory change ($426.6 billion); personal consumption ($306.5 billion); exports ($223.9 billion); federal defense ($37.8 billion); and other government spending ($48.1 billion).
- Ten states have more than 100,000 workers each because of the electronics manufacturing sector, led by California and Texas.
- Electronics manufacturing employees average about $127,000 in total labor income, which is more than double the national average compensation of $60,820. Electronics manufacturing employees also earn more than the average manufacturing employee, who earns $83,000 a year.
- States with higher-than-average contributions to GDP from electronics manufacturing include Oregon, California, Massachusetts, Minnesota, North Carolina, Arizona, Texas, Wisconsin, and Colorado.
- The largest subsectors of electronics manufacturing, ranked by output, are computer and peripheral equipment manufacturing, semiconductor and other electronic component manufacturing; and navigational, measuring, electromedical, and control instruments manufacturing, which together make up over 73% of the total.
COVID-19 Impacts on the Industry
Regarding the biggest economic concern of the moment, the coronavirus epidemic is being felt by the U.S. electronics manufacturing industry. The electronics manufacturing industry is facing a variety of challenges, including unclear and evolving operating restrictions, changing demand patterns, abnormalities in supply chains, and an unsettled workforce that was already stretched thin.
While manufacturers and suppliers report several concerns, they appear most concerned about weaker demand. In April, more than half of manufacturers said this would be their biggest concern in the weeks ahead, according to IPC’s COVID-19 Survey of the Electronics Industry. Some 44 percent reported they are most concerned about supply shortages, while just over a third said they are worried about worker shortages.
Also, as work dried up, many manufacturers issued temporary layoffs in March and April, and now a majority of respondents report they expect to bring furloughed workers back to factories by the end of June 2020. However, one in five said furloughed workers would not return.
Finally, nearly 70% of manufacturers have applied for a Payroll Protection Program loan to help cope through these challenging times. Of those who have applied, roughly 44% have received funding, while 25% are still waiting to receive funding.
“To help drive recovery from the COVID-19 crisis, we call on Congress to do more and establish a $10 billion Electronics Manufacturing Initiative to enhance the security of the U.S. electronics value chain,” said Mitchell. “By leveraging public-private partnerships, we can grow domestic capacity, research and development capabilities and bridge the workforce to elevate employee training.”
About IPC
IPC (www.IPC.org) is a global industry association based in Bannockburn, Ill., dedicated to the competitive excellence and financial success of its 5,900 member-company sites which represent all facets of the electronics industry, including design, printed board manufacturing, electronics assembly and test. As a member-driven organization and leading source for industry standards, training, market research and public policy advocacy, IPC supports programs to meet the needs of an estimated $2 trillion global electronics industry. IPC maintains additional offices Washington, D.C.; Atlanta, Ga.; Miami, Fla.; Brussels, Belgium; Bangalore and New Delhi, India; Bangkok, Thailand; and Qingdao, Shanghai, Shenzhen, Chengdu, Suzhou and Beijing, China.
Suggested Items
DuPont Unveils Brand Identity for Qnity, Future Electronics Spin-Off
05/15/2025 | PRNewswireDuPont unveiled the branding of Qnity, the planned independent Electronics public company that will be created through the intended spin-off of its Electronics business*.
K & F Electronics Invests in Workforce Training with IPC-A-610
05/15/2025 | K & F ElectronicsIn a strategic move to prioritize employee development and uphold quality standards, K & F Electronics, a third-generation, family-owned printed circuit board (PCB) manufacturer based in Fraser, Michigan, used a recent period of reduced production to certify its employees in IPC-A-610, the industry standard for the acceptability of electronic assemblies.
Canadian Circuits Inc. Unveils Rapid Prototype PCB Assembly Service to Accelerate Innovation
05/14/2025 | Canadian Circuits, Inc.Canadian Circuits Inc. (CCI), a leading provider of high-quality, made-in-Canada, Printed Circuit Board (PCB) solutions, is proud to announce the launch of its Prototype PCB Assembly (PCBA) service. This new offering enhances CCI’s commitment to empowering engineers and OEMs by accelerating the journey from concept to product launch with precision and efficiency in electronics manufacturing.
From DuPont to Qnity: A Bold Move in Electronics Materials
05/14/2025 | Marcy LaRont, I-Connect007DuPont has announced the intended spinoff of a public independent electronics company, Qnity, which will serve as a solutions provider to the semiconductor and electronics industries to enhance competitiveness and innovation in advanced computing, smart technologies, and connectivity. In this interview, Jon Kemp, Qnity CEO-elect and current president of DuPont’s Electronics business, shares his insights on the strategic separation from DuPont.
Legislative Update: Is the SEMI Investment Act Inclusive of PCB and Substrates?
05/13/2025 | I-Connect007 Editorial TeamIn response to this week's news about new U.S. legislation being put forth by SEMI to support our domestic electronics supply chain—the Strengthening Essential Manufacturing and Industrial (SEMI) Investment Act—IPC’s Richard Capetto, senior director of North American Government Relations, made the following statement.