SkyWater and MIT Begin Second Phase of DARPA-funded 3DSoC Program
August 21, 2020 | Business WireEstimated reading time: 2 minutes

SkyWater Technology, the trusted technology realization partner, announced the DARPA Three Dimensional Monolithic System-on-a-Chip (3DSoC) program, in collaboration with Massachusetts Institute of Technology (MIT), has entered its second phase. After completing the program’s initial phase, focused on transferring the Carbon Nanotube Field Effect Transistor (CNFET)-based 3DSoC technology into SkyWater’s 200 mm production facility, phase two will focus on refining manufacturing quality, yield, performance, and density; key elements of commercial viability. The 3DSoC program aims to shift cost/performance benchmarks that have been the standard for decades. This new paradigm is expected to accelerate AI and advanced computing across use cases in autonomous vehicles, medical/healthcare diagnostics, edge computing, wearables, and IoT applications.
The DARPA 3DSoC program, which began in 2018, has realized several technical achievements after running a wide variety of test chips to improve CNT manufacturability and reliability. A 3DSoC program update will be presented by MIT professor, Dr. Max Shulaker at the virtual 2020 DARPA Electronics Resurgence Initiative (ERI) Summit on August 20th. The program team’s work on the 3DSoC program was presented in June at the virtual 2020 Symposia on VLSI Technology and Circuits, highlighting BEOL monolithic 3D integration of CNFETs + RRAM and first hardware demonstrations of the monolithically integrated 3DSoC technology with SRAM and RISC-V compute core. The update also covered the team’s development of an industrial-grade foundry process design kit (PDK) for the 3DSoC technology platform, which marks a significant milestone to enable customer designs in SkyWater’s Early Access Program.
Additionally, the work on foundry integration by MIT and SkyWater was published recently in Nature Electronics demonstrating the methodologies employed to volume manufacture CNTs on 200 mm wafers in the same commercial facilities that fabricate silicon-based transistors. This important step in taking CNTs from the lab to the factory floor paves the way for more energy efficient, 3D microprocessors.
Notably, the technology enables the ability to monolithically integrate stackable tiers of CNT-based logic and RRAM to realize a high-density, high-bandwidth SoC architecture, all with low temperature fabrication techniques. While this is anticipated to accelerate AI and advanced computing, it also opens new dimensions of innovation and potentially enables backend logic integration with non-silicon substrates. This development would bring new possibilities for monolithic heterogeneous integration, which will lead to on-chip logic for new imaging, smart sensors, power management, and many other undiscovered applications.
“We are excited to continue this journey with MIT to fulfill the unique promise of carbon nanotube technology to the semiconductor industry, with disruptive implications for artificial intelligence and leading-edge computing applications across commercial and defense industries,” said Dr. Brad Ferguson, SkyWater Chief Technology Officer.
Added Thomas Sonderman, SkyWater President, “This program is proving the viability and scalability of CNFETs and demonstrates SkyWater’s broader commitment to support the resurgence of advanced manufacturing capabilities in the U.S.”
“It is really exciting to take this giant step forward and hit milestones inside of a foundry environment, making this leap into production. This marks a time for the industry to take notice of CNTs as a much more energy efficient alternative than silicon-based transistors and prepare product roadmaps for this disruptive technology,” said Dr. Max Shulaker, MIT Professor of Electrical Engineering and Computer Science.
Suggested Items
2025 ASEAN IT Spending Growth Slows to 5.9% as AI-Powered IT Expansion Encounters Post-Boom Normalization
06/26/2025 | IDCAccording to the IDC Worldwide Black Book: Live Edition, IT spending across ASEAN is projected to grow by 5.9% in 2025 — down from a robust 15.0% in 2024.
DownStream Acquisition Fits Siemens’ ‘Left-Shift’ Model
06/26/2025 | Andy Shaughnessy, I-Connect007I recently spoke to DownStream Technologies founder Joe Clark about the company’s acquisition by Siemens. We were later joined by A.J. Incorvaia, Siemens’ senior VP of electronic board systems. Joe discussed how he, Rick Almeida, and Ken Tepper launched the company in the months after 9/11 and how the acquisition came about. A.J. provides some background on the acquisition and explains why the companies’ tools are complementary.
United Electronics Corporation Advances Manufacturing Capabilities with Schmoll MDI-ST Imaging Equipment
06/24/2025 | United Electronics CorporationUnited Electronics Corporation has successfully installed the advanced Schmoll MDI-ST (XL) imaging equipment at their advanced printed circuit board facility. This significant technology investment represents a continued commitment to delivering superior products and maintaining their position as an industry leader in precision PCB manufacturing.
Insulectro & Dupont Host Technology Symposium at Silicon Valley Technology Center June 25
06/22/2025 | InsulectroInsulectro, the largest distributor of materials for use in the manufacture of PCBs and printed electronics, and DuPont, a major manufacturer of flex laminates and chemistry, invite fabricators, OEMS, designers, and engineers to attend an Innovation Symposium – Unlock the Power - this Wednesday, June 25, at DuPont’s Silicon Valley Technology Center in Sunnyvale, CA.
OKI, NTT Innovative Devices Establish Mass Production Technology for High-Power Terahertz Devices by Heterogeneous Material Bonding
06/21/2025 | BUSINESS WIREOKI, in collaboration with NTT Innovative Devices Corporation, has established mass production technology for high-power terahertz devices using crystal film bonding (CFB) technology for heterogeneous material bonding to bond indium phosphide (InP)-based uni-traveling carrier photodiodes (UTC-PD) onto silicon carbide (SiC) with excellent heat dissipation characteristics for improved bonding yields.