FAA Certifies Cirrus Vision Jet’s Safe Return
August 31, 2020 | Globe NewswireEstimated reading time: 2 minutes

Cirrus Aircraft and Garmin International, Inc. announced Federal Aviation Administration (FAA) certification of the Cirrus Vision Jet™ Safe Return™ system – a revolutionary system enabled by Garmin’s autoland technology that allows passengers to land the Vision Jet with just the touch of a button. The certification follows tremendous growth of the Vision Jet, including becoming the world’s best-selling jet in general aviation earlier this year and delivery of the 200th Vision Jet last month. Now, with Safe Return and the Collier award-winning Cirrus Airframe Parachute System® (CAPS®), the Vision Jet provides the most comprehensive, must-have total safety solution in general aviation.
“With Safe Return, we are making personal aviation more accessible, elevating the passenger experience and taking the next step towards autonomous flight,” said Zean Nielsen, Chief Executive Officer at Cirrus Aircraft. “The Vision Jet sets a new standard in personal travel with the combination of Safe Return and CAPS, offering the ultimate level of safety, control and comfort for the pilot and passengers.”
The Safe Return activation button is purposefully located on the ceiling in the Vision Jet's cabin for easy access by passengers and can be activated, if needed, within minutes of the aircraft’s take-off. Once activated by the touch of a button, Safe Return assumes control of the aircraft and transforms the Vision Jet into an autonomous vehicle that navigates to the nearest suitable airport for landing, communicates with air traffic control, lands and brings the aircraft safely to a complete stop, allowing passengers to exit the aircraft. This revolutionary system is powered by the Cirrus Perspective+ by Garmin® flight deck, which uses all available aircraft data to calculate a flight plan, avoid terrain and weather, initiate an approach and complete a fully autonomous landing without pilot or passenger intervention.
Additionally, the flight deck provides visual and aural updates to the passengers, including current location, remaining fuel, airport of arrival and estimated time of arrival. Safe Return can be easily disengaged by the pilot with a simple press of the Autopilot disconnect button on the yoke if a passenger inadvertently activates the system.
“Garmin and Cirrus share a passion for designing and engineering products without compromise. Together, we have delivered some of the finest safety-enhancing technologies to our customers over the years, and we are proud to now add the certification of Garmin Autoland in the Cirrus Vision Jet to that growing list of accomplishments,” said Phil Straub, Garmin Executive Vice President and Managing Director of Aviation. “Congratulations to our collective teams who contributed to the certification of Autoland on the Vision Jet, a technology that will undoubtedly have lasting impacts on the safety of our aviation industry and the lives of our customers.”
In 2016, Cirrus Aircraft ushered in a new era in personal transportation with the FAA certification of the world’s first single-engine Personal Jet – the Vision Jet. The turbine aircraft defined a new category in aviation with its spacious pilot and passenger-friendly cabin featuring panoramic windows, reclining seats, comfortable legroom for five adults and two children, and as the only turbine aircraft with a whole airframe parachute system as standard equipment. Then, in 2019, Cirrus Aircraft unveiled and began delivery of the G2 Vision Jet, offering enhanced performance, comfort and safety with increased cruise altitude, speed and range, and a newly-upgraded Perspective Touch+™ by Garmin® flight deck.
Testimonial
"We’re proud to call I-Connect007 a trusted partner. Their innovative approach and industry insight made our podcast collaboration a success by connecting us with the right audience and delivering real results."
Julia McCaffrey - NCAB GroupSuggested Items
TTM Technologies Achieves CMMC Level 2 Certification
08/11/2025 | TTM Technologies, Inc.TTM Technologies, Inc. announced that it has been officially appraised at Final Cybersecurity Maturity Model Certification (CMMC) Level 2, demonstrating the company’s strong commitment to safeguarding Controlled Unclassified Information (CUI) and to meeting the Cybersecurity requirements of the U.S. Department of Defense (DoD).
Federal Electronics Marks 10th Year of ISO 13485 Certification with Successful 2025 Surveillance Audit
08/05/2025 | Federal ElectronicsFederal Electronics, a leader in providing advanced electronic manufacturing services, has successfully completed its 2025 ISO 13485:2016 surveillance audit at the company’s Cranston, Rhode Island facility.
TapRen Tech Solutions Releases Comprehensive Guide to UL Certification
07/28/2025 | TapRen Tech SolutionsTapRen, a fast-growing electronics product development partner, has released a comprehensive new guide to UL certification, aimed at helping startups, engineers, and product teams navigate one of the most misunderstood elements of launching hardware products.
NEOTech’s Agave 1 Facility Earns AS9100 Certification for Commercial Aerospace Manufacturing Excellence
07/17/2025 | NEOTechNEOTech, a premier provider of electronic manufacturing services (EMS), integrated design engineering, and advanced supply chain solutions for the aerospace and defense, medical device, and high-tech industrial markets, proudly announces that its Agave 1 manufacturing facility in Juarez, Mexico has officially received AS9100 certification.
Medco West Completes ISO 9001:2015 Recertification for Quality Management Excellence
07/10/2025 | Medco West Electronics, Inc.Medco West Electronics, Inc., a leader in high quality electronic assemblies, is proud to announce the successful recertification of its ISO 9001:2015 certification for its quality management system.