-
- News
- Books
Featured Books
- pcb007 Magazine
Latest Issues
Current IssueInner Layer Precision & Yields
In this issue, we examine the critical nature of building precisions into your inner layers and assessing their pass/fail status as early as possible. Whether it’s using automation to cut down on handling issues, identifying defects earlier, or replacing an old line...
Engineering Economics
The real cost to manufacture a PCB encompasses everything that goes into making the product: the materials and other value-added supplies, machine and personnel costs, and most importantly, your quality. A hard look at real costs seems wholly appropriate.
Alternate Metallization Processes
Traditional electroless copper and electroless copper immersion gold have been primary PCB plating methods for decades. But alternative plating metals and processes have been introduced over the past few years as miniaturization and advanced packaging continue to develop.
- Articles
- Columns
Search Console
- Links
- Media kit
||| MENU - pcb007 Magazine
Minco Introduces S7 and TC7 Tri-Certified Miniature Embedment Temperature Sensors
September 11, 2020 | Minco Products Inc.Estimated reading time: 1 minute
Minco Products Inc., a global provider of thermal solutions, flex circuits, and temperature sensing and control solutions, launched the S7 and TC7, a new line of miniature bearing embedment temperature sensors.
These sensors commonly monitor the metal temperature of bearings in rotating equipment — the most reliable indicator of bearing condition — to give early warning of oil film breakdown before costly failures occur. Moreover, the S7 and TC7 sensor leads can be configured with either stainless steel feedthrough tubes or elastomer filled cables to block oil from wicking out of the machine housing along the lead wires.
“Our S7 and TC7 sensors are tri-certified by multiple agencies, including IECEx, ATEX and North American (CSA US and CSA Canada) for use in hazardous areas. This means our customers can feel confident they are covered under many potential certification requirements with one sensor. Using a single, highly capable component like this can increase flexibility, reduce inventory and improve engineering efficiencies,” says Darrell Hyde, Product Marketing Manager at Minco. “These sensors can be mounted either by spring loading or potting into the bearing shoes which are later installed in a variety of equipment, including motors, generators, gearboxes, pumps and compressors.”
Additional features:
- Metal casing and a variety of lead wire and cable options to withstand rough handling and harsh environments
- Five case styles/sizes allow for different installation needs
- Available with a variety of sensing elements including 100-ohm and 1000-ohm platinum RTDs, 100-ohm and 120-ohm nickel RTDs, plus Type E, J, K or T thermocouples
Minco has been a leading supplier of temperature sensors for over 60 years with an unwavering focus on exceptional product quality. The engineer-driven company has designed thousands of standard and custom sensing packages to seamlessly operate in a wide range of applications.
Suggested Items
SIA Statement on Biden Administration’s Launch of Section 301 Trade Investigation Related to China’s Targeting of the Semiconductor Industry for Dominance
12/25/2024 | SIAThe Semiconductor Industry Association (SIA) released the following statement from SIA President and CEO John Neuffer regarding the Biden administration’s decision to launch a Section 301 trade investigation focused on China’s acts, policies, and practices related to targeting of the semiconductor industry for dominance.
Biden-Harris Administration Announces CHIPS Incentives Award with Samsung Electronics to Solidify U.S. Leadership in Leading-Edge Semiconductor Production
12/23/2024 | U.S. Department of CommerceThe Biden-Harris Administration announced that the U.S. Department of Commerce awarded Samsung Electronics (Samsung) up to $4.745 billion in direct funding under the CHIPS Incentives Program’s Funding Opportunity for Commercial Fabrication facilities.
Zhou (Peter) Guoyin: Pioneering the Standardization of ESG
12/23/2024 | Chuck Li, IPC AsiaWith more than 30 years of experience in corporate social responsibility (CSR) and environmental, social, and governance (ESG), Zhou (Peter) Guoyin has not only witnessed the evolution of CSR and ESG globally but has also been a key force in driving their development. As chair of the IPC-1401 standard committee, Zhou has led numerous innovative projects over the past 11 years and was awarded the SEDEX Supply Chain Impact Award in August 2024. In this exclusive interview, he shares valuable insights into the ESG field and the profound impact of IPC-1401 on the electronics manufacturing industry.
SandboxAQ Announces More Than $300 Million of Funding to Drive Next Era of AI
12/19/2024 | PRNewswireSandboxAQ announced a round of more than $300 million from Fred Alger Management, LLC, T. Rowe Price Associates, Inc., Mumtalakat, Parkway Venture Capital, Breyer Capital, Rizvi Traverse, S32, US Innovative Technology Fund, Ava Investments,
Dicro Accepted as a Member of the Defence and Aerospace Industry Association PIA
12/18/2024 | Dicro OyDicro is proud to announce that the company has been accepted as a member of the Defence and Aerospace Industry Association PIA, starting from January 1, 2025. This membership reinforces Dicro's commitment to high-quality and innovative solutions in the defence and aerospace sectors.