It’s Only Common Sense: Invest in Yourself—You’re Your Most Important Resource
Dan's Biz Bookshelf: 'Revenge of the Tipping Point'
Marcy's Musings: Engineering Economics
Isola Releases IS550H Material
April 26, 2021 | Nolan Johnson, I-Connect007Estimated reading time: 2 minutes
Nolan Johnson speaks with Michael Gay of Isola and Chris Hunrath of Insulectro about the release of their new halogen-free, high-thermal reliability material, which they hope fills the gap in the market between epoxies and polyimides.
Nolan Johnson: I understand there’s something new on the market for us to talk about. Why don’t you tell us what it is and what the application is?
Michael Gay: Quite a few years ago, the automotive industry OEMs were looking for an alternative to ceramic-based materials for high temperature applications. They wanted something that was less costly. They wanted something that would fill in the gap between typical FR-4 applications and ceramics. A consortium called The Help Project was developed with several large OEMs and other industry participants in the automotive sector who wanted to work together and develop this material. We started with about a half-dozen different candidates and then whittled it down, making comparison to products like 370HR, which is a typical FR-4 lead-free compatible material. We started doing evaluations and we came up with the product we now call IS550H.
Johnson: And this is a new product?
Gay: Yes, it’s brand new. We launched this product about four or five weeks ago. The product is manufactured in Asia. It’s really directed toward the automotive industry, but because of the properties of the material, it can actually be applied to other industries where high temperatures and high voltage CAF performance are required.
Johnson: From the automotive application perspective, how is this a response to the demands of OEMs?
Chris Hunrath: High-speed charging is an obvious area of concern, and one of the ways you accomplish that is using higher voltage. You need something with very good dielectric properties. Epoxy is good, but this material is better. Rapid charging drives this heavy copper requirement as well as the ability to make circuits and embed them in the dielectric material. With thermal performance, in the organic substrates, it has always been the domain of polyimide, with epoxies, multifunctional epoxies, and some materials in between. But there was a space between polyimide and epoxy, and we knew that polyimide doesn’t do certain things very well. It absorbs moisture, but it gets brittle as it cures. It is very decomposition resistant, but it does have some other drawbacks.
As Michael mentioned, ceramics are very good in certain applications for high temperature, but you can’t do everything you want to do in circuitry in ceramics that you can easily do with a PCB material or organic PCB material. This just gives the engineers and designers a whole lot of options when they’re designing circuits. The base resin chemistry (I don’t believe it’s proprietary) is something called benzoxazine, and it’s a newer resin system. It’s been around for a long time, but it’s newer than epoxy. The way it cross-links and the way it behaves in high temperature applications is different. It has actually been used in aircraft bodies. You’ve heard the airline industry is moving away from aluminum parts to composite parts. Well, this is the resin that is being used. Resin has to be able to flow and fill large features very well, but it also has to withstand temperature variations. Think of an aircraft on the runway vs. an aircraft in the upper atmosphere—we see some pretty wide temperature changes. This resin chemistry does all those things very well.
To read this entire interview, which appeared in the April 2021 issue of PCB007 Magazine, click here.
Share on:
Suggested Items
Unlocking Advanced Circuitry Through Liquid Metal Ink
10/31/2024 | I-Connect007 Editorial TeamPCB UHDI technologist John Johnson of American Standard Circuits discusses the evolving landscape of electronics manufacturing and the critical role of innovation, specifically liquid metal ink technology, as an alternate process to traditional metallization in PCB fabrication to achieve ever finer features and tighter tolerances. The discussion highlights the benefits of reliability, efficiency, and yields as a tradeoff to any increased cost to run the process. As this technology becomes better understood and accepted, even sought out by customers and designers, John says there is a move toward mainstream incorporation.
Fresh PCB Concepts: The Critical Nature of Copper Thickness on PCBs
10/31/2024 | Team NCAB -- Column: Fresh PCB ConceptsPCBs are the backbone of modern electronics and the copper layers within these boards serve as the primary pathways for electrical signals. When designing and manufacturing PCBs, copper thickness is one of the most critical factors and significantly affects the board’s performance and durability. The IPC-6012F specification, the industry standard for the performance and qualification of rigid PCBs, sets clear guidelines on copper thickness to ensure reliability in different environments and applications.
Book Excerpt: The Printed Circuit Designer’s Guide to... DFM Essentials, Ch. 1
10/25/2024 | I-Connect007The guidelines offered in this book are based on both ASC recommendations and IPC standards with the understanding that some may require adjustment based on the material set, fabricator processes, and other design constraints. This chapter details high-frequency materials, copper foil types, metal core PCBs, and the benefits of embedded capacitance and resistor materials in multilayer PCBs.
The Cost-Benefit Analysis of Direct Metallization
10/21/2024 | Carmichael Gugliotti, MacDermid AlphaCarmichael Gugliotti of MacDermid Alpha discusses the innovative realm of direct metallization technology, its numerous applications, and significant advantages over traditional processes. Carmichael offers an in-depth look at how direct metallization, through developments such as Blackhole and Shadow, is revolutionizing PCB manufacturing by enhancing efficiency, sustainability, and cost-effectiveness. From its origins in the 1980s to its application in cutting-edge, high-density interconnects and its pivotal role in sustainability, this discussion sheds light on how direct metallization shapes the future of PCB manufacturing across various industries, including automotive, consumer electronics, and beyond.
Connect the Dots: Designing for Reality—Pattern Plating
10/16/2024 | Matt Stevenson -- Column: Connect the DotsIn the previous episode of I-Connect007’s On the Line with… podcast, we painted the picture of the outer layer imaging process. Now we are ready for pattern plating, where fabrication can get tricky. The board is now ready to receive the copper traces, pads, and other elements specified in the original CAD design. This article will lay out the pattern plating process and discuss constraints in the chemistries that must be properly managed to meet the customer's exacting manufacturing tolerances.