Dan’s Biz Bookshelf: 'This Is Strategy: Make Better Plans'
The Chemical Connection: Reducing Defects in Circuit Board Production
It’s Only Common Sense: Trust Is All You Need
Arlon’s 85HP Receives Official IPC Validation to IPC-4101E-WAM1/43
May 24, 2021 | Arlon Electronic MaterialsEstimated reading time: 1 minute
Arlon Electronic Materials is pleased to announce that IPC Validation Services officially recognizes Arlon’s 85HP laminate as having passed all tests that meets or exceeds the product performance requirements of IPC-4101E-WAM1/43. By achieving validation to slash sheet 43, Arlon’s 85HP is distinguished as the most thermally stable, pure polyimide resin system on the market. Specifically, 85HP meets the test criteria for less than 1% coefficient of thermal expansion in the Z axis between 50o to 260o C. In “Time to Delamination” tests at 300o C, 85HP withstood thermal exposure for longer than 60 minutes, far exceeding the slash 43 requirement of 5 minutes. Furthermore, 85HP moisture absorption of 0.19% is well below the slash 43 criteria of 0.5% maximum. CTE (x-y plane) of the 85HP is 17 ppm matching the CTE of copper. In addition to these slash 43 requirements, 85HP has a thermal conductivity of 0.50 W/mK, which is two times (2X) greater than other pure polyimide CCL materials.
These unique attributes are why 85HP is the first polyimide product to be validated to three IPC-4101 slash sheets 40, 41 and 43.
Test results for 85HP’s Validation can be found on the IPC Validation Services website.
Applications for Arlon’s 85HP include high layer count MLB’s incorporating multiple sequential lamination operations, thick copper MLB’s, high power copper internal planes, deep space electronics, down-hole oil and gas drill equipment, engine control modules, rocket motor controls, and avionic electronics.
For additional information, please visit our website at www.arlonemd.com.
Related Article:
Share on:
Suggested Items
TT Electronics Secures £20 Million in Aerospace and Defence Contracts as European Programmes Accelerate
06/06/2025 | TT ElectronicsTT Electronics has been awarded more than £20 million in new and renewed defence contracts, marking a major step forward in its contribution to Europe’s rapidly evolving defence landscape.
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
06/06/2025 | Nolan Johnson, I-Connect007Maybe you’ve noticed that I’ve been taking to social media lately to about my five must-reads of the week. It’s just another way we’re sharing our curated content with you. I pay special attention to what’s happening in our industry, and I can help you know what’s most important to read about each week. Follow me (and I-Connect007) on LinkedIn to see these and other updates.
Essemtec USA Welcomes Frank Hart as Head of Sales for North America
06/05/2025 | Essemtec USAEssemtec USA is proud to announce the appointment of Frank Hart as Head of Sales for North America, effective immediately. With over 30 years of experience in the SMT industry, Frank brings a wealth of knowledge, leadership, and a strong track record of success to our team.
AT&S Opens Europe’s First IC Substrate Plant and Competence Center in Leoben
06/04/2025 | AT&SAT&S officially inaugurated its new Competence Center for R&D and IC Substrate Production on Tuesday with a high-profile ceremony at its headquarters in Leoben-Hinterberg. Numerous high-ranking guests from politics, industry, and the media were welcomed to the event and given an exclusive tour of the 11,000-square-meter site of cutting-edge technology. With an investment of more than € 500 million,
New Era Electronics Establishes U.S. Presence with New Salt Lake City Operation
06/04/2025 | PRNewswireNew Era Electronics, a leading provider of high-performance industrial computing solutions, announces the establishment of its first United States location in Salt Lake City, Utah. This strategic expansion to the U.S. underscores New Era Electronics' commitment to enhancing supply chain continuity and delivering exceptional services across North America.