Dan’s Biz Bookshelf: ‘Costovation: Innovation That Gives Your Customers Exactly What They Want—And Nothing More’
The Right Approach: ‘Twas the Night Before Christmas (Harley-style)
It’s Only Common Sense: Dear Santa, Here’s My Sales Wish List
Call-for-Participation Webinar: iNEMI Electromigration of SnBi Solder for Second-Level Interconnect Project
January 7, 2022 | iNEMIEstimated reading time: 1 minute
The low melting temperature of SnBi alloys (138°C) makes them attractive for assembling thermally warpage-prone high-density microelectronic packaging. However, Bi has a high propensity for electromigration and segregation at the anode under high current density conditions. This can lead to potentially brittle solder joints with high electrical resistance over time in the field. There is a need to mitigate this shortcoming and develop SnBi solder joints that maintain their performance and reliability over the product life. This iNEMI project will explore the potential to reduce electromigration in low-height solder joints by taking advantage of mechanical and/or chemical back stresses.
Objective
The overall project objective is to determine the boundaries of the envelope formed by joint height, temperature, current density and PCB finishes within which the solder joint will operate reliably over the product life.
The project has multiple phases planned. The first phase will:
- Establish an appropriate test vehicle for electromigration study of solder joints, including a convenient means of achieving various joint heights.
- Investigate the role of back pressure in reducing electromigration in eutectic SnBi solder joints by determining the rate of electromigration of SnBi solder joints with and without diffusion barriers as a function of current density, temperature and joint height.
The Electromigration of SnBi Solder for Second-Level Interconnect project is open for sign-up until January 31, 2022. Two call-for-participation webinar sessions are scheduled to introduce the project. These webinars are open to industry; advance registration is required.
Registration
Tuesday, January 11, 2022
10:00-11:00 a.m. EST (Americas)
3:00-4:00 p.m. CET (Europe)
11:00-12:00 p.m. CST (China)
Register for this webinar
Thursday, January 13, 2022
9:00-10:00 a.m. CST (China)
8:00-9:00 p.m. EST (Americas) on January 12
Register for this webinar
Share on:
Suggested Items
Book Excerpt: The Printed Circuit Assembler’s Guide to... Low-Temperature Soldering, Vol. 2, Chapter 5
12/23/2024 | I-Connect007 Editorial TeamChapter 5 introduces the advantages of using low-temperature soldering for through-hole components, including cost efficiency, reliability improvement, and reduced warpage. Also covered: the evaluation of different fluxes and the performance of HRL3 in wave soldering and selective soldering processes.
Overview of Soldering Systems With Vacuum
12/18/2024 | Dr. Paul Wild, Rehm Thermal Systems GmbHWhen soldering electronic assemblies, the focus of the vacuum application is on the removal of volatile substances from the solder joints and the associated reduction of pore formation. Particularly in the thermal management of power electronics components, pores can cause so-called hotspots with higher temperatures due to their poor heat conduction. These hotspots can lead to overheating of the components on the one hand and to thermally induced destruction of the solder structure on the other.
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
12/13/2024 | Andy Shaughnessy, I-Connect007This week, Peter Tranitz discusses the upcoming Pan-European Electronics Design Conference, set for Jan. 29-30 in Vienna, Austria. Pete Starkey brings us a review of the most recent EIPC Technical Snapshot webinar, which featured a global PCB maker update by Dr. Hayao Nakahara. Don't miss our interview with Manfred Huschka, who explains how companies can begin their own China Plus One plan. Stan Farnsworth breaks down photonic soldering and discusses its use in soldering materials that are not typically compatible. I also enjoyed Dan Beaulieu’s discussion on the value of consistency, and why just showing up for work is half the battle, especially in an inconsistent, evolving industry like ours.
Advancing Photonic Soldering
12/11/2024 | Nolan Johnson, SMT007 MagazineStan Farnsworth, director of customer satisfaction at PulseForge, discusses the advancements in photonic soldering that highlight its energy efficiency and versatility. Over the past two years, the company has refined its applications for flexible substrates and energy reduction, finding that photonic soldering allows the processing of materials that typically aren’t thermally compatible and offers significant energy savings compared to traditional methods.
Indium Introduces New ROL0 and Halogen-free Flux-cored Wire
12/11/2024 | Indium CorporationIndium Corporation announced the global availability of CW-807RS, a new high-reliability, halide- and halogen-free flux-cored wire that improves wetting speeds and cycle times for electronics assembly and robot soldering applications.