The New Chapter: The Benefits of Continuing Education
It’s Only Common Sense: You’ve Got to Hustle
ILFA Invests in the Expansion of its PCB Lamination Capacities
September 27, 2022 | ILFAEstimated reading time: 1 minute
During the LAUFFER Technology Days, ILFA Managing Director Thomas Michels and LAUFFER Managing Director Christof Lauffer announce a close cooperation, which is sealed with a joint letter of intent. The new investment project, which is part of ILFA's modernisation offensive, is aimed at a highly automated lamination centre that will sustainably support PCB production at ILFA's Hanover site.
With the planned new investment from LAUFFER, ILFA GmbH will triple its production capacity in the lamination area. At a cost of more than EUR 1.3 million, the laminating centre would be the largest single investment to date in the company's 43-year history. The modernisation offensive at ILFA provides for total investments in the higher double-digit million range. In addition to increased automation, numerous new acquisitions are currently being made in the areas of OFT (surface technology) and FLT (photo and lacquer technology). These include a new DES line, solder resist developers, micro etching and a new plasma system.
Thomas Michels explains: "On the one hand, we want to grow technologically, but on the other hand, we also want to significantly expand our production capacities. In this way, we will consolidate our position in the market and further establish ourselves in the field of rigid-flex printed circuit boards, RF and power technology as well as in the process-safe processing of the finest structures. We are pleased to have gained LAUFFER as a partner who will support us with its many years of expertise."
The projected RMV 125/6 LAUFFER lamination centre is characterised above all by a high degree of automation and very high energy efficiency during the lamination process. Thanks to the unique design concept with large storage capacities, which was specially adapted to ILFA's requirements, the laminating system can be operated fully automatically even during night shifts or so-called ghost shifts. Another innovation is the operation of the system with newly designed heat accumulators for heat recovery during press operation. These enable energy saving effects of up to 30% depending on the operating mode of the entire system. "We are pleased to be able to realise this project together with ILFA. We see this as an important signal for the European PCB industry and especially for the domestic market in Germany," says Christof Lauffer about the jointly planned project.
Share on:
Suggested Items
Overview of Soldering Systems With Vacuum
12/18/2024 | Dr. Paul Wild, Rehm Thermal Systems GmbHWhen soldering electronic assemblies, the focus of the vacuum application is on the removal of volatile substances from the solder joints and the associated reduction of pore formation. Particularly in the thermal management of power electronics components, pores can cause so-called hotspots with higher temperatures due to their poor heat conduction. These hotspots can lead to overheating of the components on the one hand and to thermally induced destruction of the solder structure on the other.
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
12/13/2024 | Andy Shaughnessy, I-Connect007This week, Peter Tranitz discusses the upcoming Pan-European Electronics Design Conference, set for Jan. 29-30 in Vienna, Austria. Pete Starkey brings us a review of the most recent EIPC Technical Snapshot webinar, which featured a global PCB maker update by Dr. Hayao Nakahara. Don't miss our interview with Manfred Huschka, who explains how companies can begin their own China Plus One plan. Stan Farnsworth breaks down photonic soldering and discusses its use in soldering materials that are not typically compatible. I also enjoyed Dan Beaulieu’s discussion on the value of consistency, and why just showing up for work is half the battle, especially in an inconsistent, evolving industry like ours.
Advancing Photonic Soldering
12/11/2024 | Nolan Johnson, SMT007 MagazineStan Farnsworth, director of customer satisfaction at PulseForge, discusses the advancements in photonic soldering that highlight its energy efficiency and versatility. Over the past two years, the company has refined its applications for flexible substrates and energy reduction, finding that photonic soldering allows the processing of materials that typically aren’t thermally compatible and offers significant energy savings compared to traditional methods.
Indium Introduces New ROL0 and Halogen-free Flux-cored Wire
12/11/2024 | Indium CorporationIndium Corporation announced the global availability of CW-807RS, a new high-reliability, halide- and halogen-free flux-cored wire that improves wetting speeds and cycle times for electronics assembly and robot soldering applications.
SolderKing Celebrates a Year of Expansion, Innovation, and Sustainability Achievements
12/09/2024 | SolderKing Assembly Materials Ltd,SolderKing Assembly Materials Ltd, a leading UK-based manufacturer of soldering materials and consumables, has wrapped up 2024 with a series of milestones that reflect its ongoing growth and commitment to innovation.