Flexible Thinking: Another PCB Design Paradigm Shift in the Works
Happy’s Tech Talk #29: Bend-to-Install Semi-flex FR-4
Connect the Dots: Five Best Practices for Designing Flex and Rigid-flex PCBs
OE-A at LOPEC – Printed Electronics Up Close
February 7, 2023 | OE-AEstimated reading time: 2 minutes
Smart skis that “feel” the vibrations of a downhill run, a flying 3 D printed drone, a sensing glove, a biosensor test kit that helps to avoid virus spreading and some more inspiring ideas play a major role in this year’s “OE-A Competition”. This yearly competition run by the OE-A, part of VDMA, fosters and challenges engineers and designers to present their printed electronics innovations to the world. At LOPEC 2023, the leading international exhibition and conference of printed electronics, from February 28 to March 02 at ICM, Messe München, all projects are showcased at the OE-A booth.
Mega trends Mobility and Smart Living
“For me personally the best thing about the competition is the exciting mix between inspiring, trendsetting ideas and market ready products. This year’s submissions are very much in line with the Focus Topics of LOPEC, we have great projects in the field of mobility and smart living. And we see that sustainability is even in early-stage projects a leading idea.” says Dr. Klaus Hecker, Managing Director of the OE-A, an international working group within VDMA.
This year 16 contributions from international companies, research institutions and universities take part in the “OE-A Competition 2023” to present their new products, prototypes, and concepts. The submitted projects are judged by a jury of representatives from well-known international companies and institutes in three categories: “Prototypes & New Products”; “Freestyle Demonstrator”; and “Publicly Funded Project Demonstrator”.
When Clever meets Smart
“The expert jury will have a hard time rating the 16 contributions and deciding on the winners of the three categories”, predicts Klaus Hecker. Here is a first snapshot of competition contributions which will be shown at the OE-A booth:
Smooth & Sharp from Taiwan submitted a printed NFC biosensor test stripe for disease screening. The test stripe decreases the risk of virus spreading triggered through testing and transportation because it shows the result straight away. The contaminated patch can be removed safely and is easy to dispose.
How to create an eco-friendly, ultra- thin and flexible heating foil based on a copper skin film shows Avery Dennison. This novel technology enables a more sustainable production of heating and sensor foils for the mobility and healthcare sector.
The Smart skis submitted by Joanneum Research and partners sensors vibrations while skiing. The energy autonomous sensor transmits data about the behavior of the ski on different slopes, material stability and the suitability of the ski for the athlete.
Who is going to win?
Not only the jury will decide which project is a winner, – but all visitors are invited to cast their vote for the “Public Choice Award”. Visitors choose from all contributions which demonstrator deserves the “Public Choice Award”. The voting takes place March 01st at the OE-A booth and the winner will be announced on the evening of Wednesday, March 01nd during the LOPEC Get-together & Award Show. Additionally, the winner of all categories will present their demonstrators at a web seminar in April 2023.
New edition of OE-A Roadmap
More than 100 experts have contributed to the new OE-A Roadmap. The OE-A Roadmap offers end-users, developers and funding bodies alike a deep insight into the technology and applications. “Next to the inspiring demos of the competition, a visit at the OE-A booth is also worthwhile to get your copy of the newly published OE-A Roadmap. For our members is this comprehensive guide of printed electronics complimentary. For non-members we offer an executive summary right at the booth. In case you cannot make it to LOPEC, summary and whitepaper will be for download at oe-a.org right after LOPEC” adds Klaus Hecker.
Share on:
Suggested Items
Designers Notebook: Impact of Advanced Semiconductor Packaging on PCB Stackup
01/07/2025 | Vern Solberg -- Column: Designer's NotebookTo accommodate new generations of high I/O semiconductor packaging, printed circuit board fabrication technology has had to undergo significant changes in both the process methods and the criteria for base material selection and construction sequence (stackup). Many of the new high-function multi-core semiconductor package families require more terminals than their predecessors, requiring a significantly narrower terminal pitch. Interconnecting these very fine-pitch, high I/O semiconductors to the PCB is made possible by an intermediate element referred to as an interposer.
BOOK EXCERPT: The Printed Circuit Designer’s Guide to... High Performance Materials, Chapter 4
01/02/2025 | I-Connect007In Chapter 4, Michael Gay discusses the two main types of copper foil used for PCB boards today: electrodeposited (ED) foil and rolled annealed (RA) foil. He also explains the pros and cons of each, and provides an update of the latest innovations in copper foil technology.
Connect the Dots: Designing for Reality—Solder Mask and Legend
01/02/2025 | Matt Stevenson -- Column: Connect the DotsIn the previous episode of I-Connect007’s On the Line with… podcast, we discussed the strip, etch, and strip process. At this point, we have a functioning board, but we still need to protect the PCB from environmental effects and document the circuit components. This brings us to the solder mask and legend phase of production.
Global PCB Connections: Following DFM Rules Leads to Better Boards
12/18/2024 | Jerome Larez -- Column: Global PCB ConnectionsAs a PCB field applications engineer, ensuring smooth communication between PCB designers and fabricators is one of my frequent challenges. A critical part of that dialogue is design for manufacturing (DFM). Many designers, even experienced ones, often misunderstand or overlook important DFM considerations. They may confuse design rules with manufacturing minimums, leading to technically feasible designs that are difficult or costly to produce. In this column, I will clarify some common DFM guidelines and help designers understand the difference between “design rules” and “minimums” while sharing best practices that will simplify the production process and ensure the highest quality PCB.
Sayonara to the Last Standing Copper Foil Plant in North America
12/17/2024 | Marcy LaRont, I-Connect007In July 2021, PCB007 Magazine published an interview with Michael Coll and Chris Stevens of Nippon Denkai about the new acquisition by Nippon Denkai of the last-standing ED foil manufacturer in North America. The plant in Augusta, Georgia, was formerly owned by Oak Mitsui, Inc. and had been purchased by Nippon Denkai the previous March, after which significant investment was made with the expectation of providing more jobs.