Nolan’s Notes: Looking Deep Into the Future With X-ray
Knocking Down the Bone Pile: Basics of Component Lead Tinning
Standard of Excellence: Anticipating Customer Needs Early and Often
IPC Releases Newest List of Standards Updates, Revisions
February 20, 2024 | IPCEstimated reading time: 2 minutes
Each quarter, IPC releases a list of standards that are new or have been updated. To view a complete list of newly published standards and standards revisions, translations, proposed standards for ballot, final drafts for industry review, working drafts, and project approvals, visit ipc.org/status.
IPC-1791D
Trusted Electronic Designer, Fabricator and Assembler Requirements
IPC-1791D provides minimum requirements, policies, and procedures for printed board design, fabrication, assembly, and cable and wire harness assembly organizations and/or companies to become trusted sources for markets requiring high levels of confidence in the integrity of delivered products.
IPC-6012F
Qualification and Performance Specification for Rigid Printed Boards
IPC-6012F covers qualification and performance of rigid printed boards, including single-sided, double-sided, with or without plated-through holes, multilayer with or without blind/buried vias, and metal core boards. It addresses final finish and surface plating coating requirements, conductors, holes/vias, frequency of acceptance testing and quality conformance, as well as electrical, mechanical, and environmental requirements.
IPC-1782B
Standard for Manufacturing and Supply Chain Traceability of Electronic Products
IPC-1782B establishes minimum requirements for manufacturing and supply chain traceability based on perceived risk. IPC-1782B applies to all products, processes, assemblies, parts, components, equipment used, and other items as defined by users and suppliers in the manufacture of printed board assemblies, as well as mechanical assembly and printed board fabrication.
IPC/WHMA-A-620E-S
Revision E—Addendum—Space and Military: Space and Military Applications Electronic Hardware Addendum to IPC/WHMA-A-620
IPC/WHMA-A-620E-S space addendum provides additional requirements to IPC/WHMA-A-620E standard to ensure the reliability of cable and wire harness assemblies that must survive the vibration and thermal excursions encountered getting to and operating in the military and space environments.
IPC-2591-V1.6
Connected Factory Exchange (CFX)
IPC-2591, Version 1.6 establishes the requirements for the omnidirectional exchange of information between manufacturing processes and associated host systems for assembly manufacturing. The standard applies to communication between all executable processes in the manufacture of printed board assemblies, automated, semi-automated, and manual, and is applicable to related mechanical assembly and transactional processes.
IPC-9203A
Users Guide to IPC-9202 and the IPC-B-52 Standard Test Vehicle
While there are a variety of industry test vehicles for the examination of material compatibility, the IPC-B-52 test board was created to meet the needs for testing both ion chromatograph and surface insulation resistance (SIR), which would be more representative of the manufacturing materials and processes. IPC-9203A standard addresses the IPC-B-52 test vehicle, which can be used to evaluate a manufacturing process, or to provide objective evidence that a chosen manufacturing material set and process are compatible from a cleanliness standpoint.
This list of standards originally appeared in the Winter 2024 issue of IPC Community. Read more articles about standards development work in each issue.
Share on:
Suggested Items
Raymond E. Pritchard IPC Hall of Fame Award: Peter Bigelow
04/04/2025 | Nolan Johnson, I-Connect007IPC’s most prestigious award honors an individual’s long-term distinguished service and contributions to IPC and the electronics manufacturing industry. Peter Bigelow is president of FTG Circuits in Haverhill, Mass., focusing on the military, RF/microwave, and aerospace markets. He also has extensive experience in general management, marketing, operations, and sales with large publicly traded and privately held manufacturing companies in the printed circuit, electronics, and instrumentation industries.
Real Time with... IPC APEX EXPO 2025: Axxon — Leading Innovations in Dispensing Technology
04/04/2025 | Real Time with...IPC APEX EXPOAxxon-Myronic showcases its four major divisions this year, highlighting their focus on dispensing technology and conformal coating for electronics. Jeff Leal, Director of Business Development and Strategy, explains how his company is expanding into North America, particularly in Mexico and Europe, backed by a strong customer service model.
Statement from IPC on ‘Liberation Day’ Pressing for Domestic Manufacturing Strategy
04/03/2025 | IPCIPC, a global electronics association dedicated to furthering the competitive excellence and financial success of more than 3,200 members, shared the following statement today on U.S. tariffs and their implications on the global electronics industry. It can be attributed to Richard Cappetto, IPC senior director of North American government affairs:
My Top 10 Highlights from IPC APEX EXPO 2025
04/03/2025 | Chris Mitchell, IPC VP, Global Government RelationsEvery year, I am reminded what an exciting and fast-paced whirlwind IPC APEX EXPO is—the friends you run into, the new people you meet, the innovations you encounter, and the fascinating discussions you dive into. It’s certainly true that our industry is driven by searchers and problem-solvers, creating endless opportunities at APEX EXPO to connect, collaborate, and shape the future.
Winners of 2025 IPC Masters Competition China Announced
04/02/2025 | IPCOn March 26-28, the IPC Masters Competition China was successfully held in Pudong, Shanghai. This year’s competition brought nearly 500 electronics industry elites from 18 provinces and municipalities.