Rainfall Spacecraft Re-enters Over Tropics
June 16, 2015 | NASAEstimated reading time: 1 minute

The Tropical Rainfall Measuring Mission (TRMM) spacecraft re-entered the Earth’s atmosphere on June 16, 2015, at 2:54 a.m. EDT, over the South Indian Ocean, according to the U.S. Strategic Command’s Joint Functional Component Command for Space through the Joint Space Operations Center (JSpOC). The U.S. Space Surveillance Network, operated by the Defense Department's JSpOC, had been closely monitoring TRMM’s descent since the mission was ended in April. Most of the spacecraft was expected to burn up in the atmosphere during its uncontrolled re-entry.
Since the beginning of the space age in the 1950s, there has been no confirmed report of an injury resulting from re-entering space objects. The last NASA spacecraft to re-enter was the Upper Atmosphere Research Satellite (UARS) in September 2011. UARS was a much larger satellite than TRMM and NASA received no reports of surviving debris.
NASA’s Orbital Debris Program Office estimates 12 components of the TRMM spacecraft could survive reentry. The chance that one of these pieces would strike someone is approximately 1 in 4,200, which is a relatively low chance.
Any sightings of suspected TRMM debris should be reported to local authorities. The pieces of TRMM expected to survive re-entry are made of titanium and are not toxic. Debris could have sharp edges and should not be touched or handled, in the unlikely event someone were to find TRMM fragments.
The value of the new type of precipitation data produced by TRMM is widely recognized by both the scientific community and the operational weather forecast community. TRMM data were used to improve weather models and hurricane track and intensity estimates around the world.
The TRMM dataset will continue to be used for research to improve global weather and climate models. The data meet exacting standards for data preservation, so that future scientists will be able to use the data. The dataset also is being processed to make up one continuous climate data record with the follow-on Global Precipitation Mission (GPM), also a joint project between the U.S. and Japan.
Suggested Items
Specially Developed for Laser Plastic Welding from LPKF
06/25/2025 | LPKFLPKF introduces TherMoPro, a thermographic analysis system specifically developed for laser plastic welding that transforms thermal data into concrete actionable insights. Through automated capture, evaluation, and interpretation of surface temperature patterns immediately after welding, the system provides unprecedented process transparency that correlates with product joining quality and long-term product stability.
Smart Automation: The Power of Data Integration in Electronics Manufacturing
06/24/2025 | Josh Casper -- Column: Smart AutomationAs EMS companies adopt automation, machine data collection and integration are among the biggest challenges. It’s now commonplace for equipment to collect and output vast amounts of data, sometimes more than a manufacturer knows what to do with. While many OEM equipment vendors offer full-line solutions, most EMS companies still take a vendor-agnostic approach, selecting the equipment companies that best serve their needs rather than a single-vendor solution.
Keysight, NTT, and NTT Innovative Devices Achieve 280 Gbps World Record Data Rate with Sub-Terahertz for 6G
06/17/2025 | Keysight TechnologiesKeysight Technologies, Inc. in collaboration with NTT Corporation and NTT Innovative Devices Corporation (NTT Innovative Devices), today announced a groundbreaking world record in data rate achieved using sub-THz frequencies.
Priority Software Announces the New, Game-Changing aiERP
06/12/2025 | Priority SoftwarePriority Software Ltd., a leading global provider of ERP and business management software announces its revolutionary aiERP, leveraging the power of AI to transform business operations.
Breaking Silos with Intelligence: Connectivity of Component-level Data Across the SMT Line
06/09/2025 | Dr. Eyal Weiss, CybordAs the complexity and demands of electronics manufacturing continue to rise, the smart factory is no longer a distant vision; it has become a necessity. While machine connectivity and line-level data integration have gained traction in recent years, one of the most overlooked opportunities lies in the component itself. Specifically, in the data captured just milliseconds before a component is placed onto the PCB, which often goes unexamined and is permanently lost once reflow begins.