Driving Innovation: Mechanical and Optical Processes During Rigid-flex Production
It’s Only Common Sense: Your Biggest Competitor Is Complacency
The Chemical Connection: Onshoring PCB Production—Daunting but Certainly Possible
Cycling Around
October 9, 2015 | Patty Goldman, I-Connect007Estimated reading time: 1 minute
Well, it’s tough to beat last month’s focus on the great things happening in automotive electronics, which was a lot of fun to read. But we still have work to do. Yeah, it’s time to focus inward again and beat down a few more alligators. We focus on cycle time reduction in this issue, and that’s a bugaboo for everyone. I’ve been thinking about it and I truly can’t come up with a scenario, at least in business, when a longer cycle time is better than shorter.
And it’s not just about manufacturing, though that is the first thing that always comes to mind. In fact, while we can talk about the cycle time of an isolated process, we also have to think about the overall cycle time, from start to finish, or from initial order to final shipment, or from initial sales contact through delivery to customer. Whatever the process or system that you choose to focus on, we have assembled experts from many parts of the PCB fab industry to help you address cycle time reduction (CTR).
In preparation for this issue, we did a survey of our readers to find out what issues they are having with CTR and the results were…interesting. While almost everyone said reducing cycle time was very important, methods for dealing with problem areas were all over the map. By that I mean the tools used ranged from brute force to time/motion studies to value stream mapping and everything in between. When we asked about bottlenecks, again, the entire PCB process was covered, from sales/marketing to front-end engineering and on through every process step, including final test.
When we asked what you wanted to learn, the answer was everything! You want tips on everything from improving efficiencies to new techniques and best practices. I think we can help with that right here and now in this issue. But if we do miss something, be sure to check our sister magazines, SMT Magazine and The PCB Design Magazine, which cover cycle time reduction in their respective topic areas.
Editor's Note: This article originally appeared in the October 2015 issue of The PCB Magazine.
Share on:
Testimonial
"The I-Connect007 team is outstanding—kind, responsive, and a true marketing partner. Their design team created fresh, eye-catching ads, and their editorial support polished our content to let our brand shine. Thank you all! "
Sweeney Ng - CEE PCBSuggested Items
Driving Innovation: Mechanical and Optical Processes During Rigid-flex Production
10/28/2025 | Kurt Palmer -- Column: Driving InnovationRigid-flex printed circuit boards are a highly effective solution for placing complex circuitry in tight, three-dimensional spaces. They are now indispensable across a range of industries, from medical devices and aerospace to advanced consumer electronics, helping designers make the most efficient use of available space. However, their unique construction—combining rigid and flexible materials—presents a fundamental challenge for PCB manufacturers.
SMTAI 2025 Review: Reflecting on a Pragmatic and Forward-looking Industry
10/27/2025 | Marcy LaRont, I-Connect007Leaving the show floor on the final afternoon of SMTA International last week in Rosemont, Illinois, it was clear that the show remains a grounded, technically driven event that delivers a solid program, good networking, and an easy space to commune with industry colleagues and meet with customers.
The Marketing Minute: Marketing With Layers
10/15/2025 | Brittany Martin -- Column: The Marketing MinuteMarketing to a technical audience is like crafting a multilayer board: Each layer serves a purpose, from the surface story to the buried detail that keeps everything connected. At I-Connect007, we’ve learned that the best marketing campaigns aren’t built linearly; they’re layered. A campaign might start with a highly technical resource, such as an in-depth article, a white paper, or a podcast featuring an engineer delving into the details of a process. That’s the foundation, the substance that earns credibility.
Taking Control of PCB Verification One Step at a Time
10/09/2025 | Kirk Fabbri, Siemens EDAToday’s designs are as complex as ever, and engineers face tough decisions every day. Simulation and verification teams are confronted with a three-fold challenge: understanding the underlying theory, mastering the tools, and applying best practices.Engineers need to navigate a vast and ever-changing cast of design and simulation tools, often with overlapping functionality.
Happy’s Tech Talk #43: Engineering Statistics Training With Free Software
10/06/2025 | Happy Holden -- Column: Happy’s Tech TalkIn over 50 years as a PCB process engineer, the one skill I acquired in college that has been most beneficial is engineering statistics. Basic statistics was part of my engineering fundamentals classes, but I petitioned the dean to let me take the engineering statistics graduate course because I was creating a senior thesis for my honors focus and needed more training on Design of Experiments (DOE).