Dan's Biz Bookshelf: 'Move Your Bus'
Driving Innovation: Direct Imaging vs. Conventional Exposure
It’s Only Common Sense: Selling to Today's Generation of Buyers
Lockheed Martin Opens Space Fence Test Facility
March 28, 2016 | PRNewswireEstimated reading time: 2 minutes
Objects in space will soon be monitored by a radar array for the U.S. Air Force's Space Fence as part of Lockheed Martin's new test site representative of the larger system under construction on the remote Kwajalein Island.
The test facility will be used for early validation of hardware, firmware and software that will enable the Space Fence to detect, track, and catalog orbital objects more than 1.5 million times a day to predict and prevent space-based collisions. The test site will also provide early lessons learned on installation of the S-band ground-based radars, support maintenance training and allow engineers to test verification procedures.
The New Jersey test site officially opened during a ceremony attended by representatives from the U.S. Air Force, local, state and federal governments, Lockheed Martin leaders and Space Fence team members.
"The opening of this test facility marks an exciting milestone for Space Fence," says Bruce Schafhauser, director, Lockheed Martin Space Fence. "We are one step closer to dramatically improving space situational awareness and increasing orbital debris monitoring by tenfold. By using an open-architecture system, Space Fence can adapt to future missions requiring various tracking and coverage approaches."
Within the Space Fence radar design, Lockheed Martin uses the latest monolithic microwave integrated circuit technology, including Gallium Nitride (GaN) semiconductor materials. GaN provides significant advantages for active phased array radar systems, including higher power density, greater efficiency and improved reliability over previous technologies.
Construction continues at the six-acre Space Fence site 2,100 miles southwest of Honolulu. Forty-five hundred cubic yards of concrete now form the foundation of the sensor site and the start of ring walls that will support the inflatable roof permeable by RF bands.
Once construction is complete, Space Fence will be tested and validated before its Initial Operating Capability occurs in late 2018.
About Lockheed Martin
Headquartered in Bethesda, Maryland, Lockheed Martin is a global security and aerospace company that – with the addition of Sikorsky – employs approximately 126,000 people worldwide and is principally engaged in the research, design, development, manufacture, integration and sustainment of advanced technology systems, products and services.
Share on:
Suggested Items
S&K Aerospace Awarded Major Contract Under DLA Maritime Acquisition Advancement Program
07/02/2025 | BUSINESS WIRES&K Aerospace, LLC has been awarded a significant contract under the Defense Logistics Agency’s (DLA) Maritime Acquisition Advancement Program, managed by the U.S. Naval Supply Command - Weapon Systems Support (NAVSUP WSS) in Mechanicsburg, PA.
Green Circuits to Exhibit Full-Service Electronics Manufacturing Solutions at 2025 SMD Symposium
07/02/2025 | Green CircuitsGreen Circuits, a full-service Electronics Manufacturing Services (EMS) partner to leading OEMs, is pleased to announce its participation in the 2025 SMD Symposium, taking place August 5-7 at the Von Braun Center in Huntsville, Alabama.
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
06/27/2025 | Nolan Johnson, I-Connect007While news outside our industry keeps our attention occupied, the big news inside the industry is the rechristening of IPC as the Global Electronics Association. My must-reads begins with Marcy LaRont’s exclusive and informative interview with Dr. John Mitchell, president and CEO of the Global Electronics Association. For designers, have we finally reached the point in time where autorouters will fulfill their potential?
Knocking Down the Bone Pile: Tin Whisker Mitigation in Aerospace Applications, Part 3
06/25/2025 | Nash Bell -- Column: Knocking Down the Bone PileTin whiskers are slender, hair-like metallic growths that can develop on the surface of tin-plated electronic components. Typically measuring a few micrometers in diameter and growing several millimeters in length, they form through an electrochemical process influenced by environmental factors such as temperature variations, mechanical or compressive stress, and the aging of solder alloys.
RTX, the Singapore Economic Development Board Sign MOU Outlining 10-year Growth Roadmap
06/20/2025 | RTXRTX and the Singapore Economic Development Board (EDB) have signed a Memorandum of Understanding (MoU) which outlines a 10-year roadmap to further long-term strategic collaboration in Singapore.