Dan’s Biz Bookshelf: Four Important Books You Need to Read (Not Just Say You Have)
Marcy’s Musings: Advancing the Advanced Materials Discussion
The Marketing Minute: Cracking the Code of Technical Marketing
Against the Density Wall: Landless Vias Might be the Answer
June 27, 2016 | Happy Holden, PCB Technologist-RetiredEstimated reading time: 1 minute
You may not know about landless vias. This has been a well-kept secret for the last 30 years, possibly because it is not permitted on military boards, and therefore, discouraged in all IPC standards. Consequently, when our Japanese partner, OKI Electric, showed us their landless via boards, we said, “You can’t do that; the vias have to have lands!” They replied, “You’ve been listening to IPC again! Try it out and test it!” So we created a test vehicle and tested thousands of vias with various diameters against numerous annular ring vias. Guess what? They were right! As the annular ring got smaller, the failures occurred earlier until we got to landless, and then they jumped to 10X fewer failures. Not understanding this result, the PhDs of HP labs went to work and came up with an explanation (included in this paper). This was so radical a discovery that HP made the data, explanations and results proprietary and a company secret.
Introduction
I saw my first landless via multilayer while visiting NEC at Toyama, Japan back in 1985.
They were an enormous automated facility making Japanese telecom and mainframe computer boards, kind of like IBM and Western Electric rolled into one. NEC was using the liquid electrophoretic, positive-acting photoresist process with panel-plating. I wouldn’t see another landless via multilayer until our Japanese partner (OKI) introduced it to us in 1988. OKI was using the landless vias to achieve higher density without having to pay the extra costs of finer lines. They knew about the higher reliability that resulted, and they had done their own testing, but were after the higher routing density and it allowed them to route five traces between 0.100 inch PTH centers.
The Electrodeposited-Positive Acting Photoresist
My first introduction to the positive-acting photoresist (+PR) was at Hewlett-Packard’s integrated circuit fabrication facility in Palo Alto, California in 1970. HP used this in the liquid form and it was spin-coated on wafers. The photoresist was supplied by Shipley Company of Newton, Massachusetts. I was further exposed to the +PR after moving to the printed circuit fabrication facility.
Editor's Note: This article originally appeared in the June 2016 issue of The PCB Magazine.
Share on:
Testimonial
"We’re proud to call I-Connect007 a trusted partner. Their innovative approach and industry insight made our podcast collaboration a success by connecting us with the right audience and delivering real results."
Julia McCaffrey - NCAB GroupSuggested Items
Building Electronics Excellence in India
09/08/2025 | Nolan Johnson, SMT007 MagazineFor over two decades, Dave Bergman has helped steer the Global Electronics Association’s work in India, from a single training course to a thriving regional operation with deep government and industry ties. In this interview, Dave explains how the group went from partnering with IPCA to opening its own office in 2010, creating India’s first domestic electronics manufacturing standard, and securing funding for dozens of Indian companies to attend U.S. trade shows.
New Podcast Episode Drop: MKS’ Atotech’s Role in Optimize the Interconnect
09/08/2025 | I-Connect007In this episode of On the Line With…, host Nolan Johnson sits down with Patrick Brooks, MKS' Atotech's Global Product Director, EL Systems, to discuss the critical role that wet processes play alongside laser systems in advancing the Optimize the InterconnectSM initiative. Brooks points to Bondfilm as a key example—a specialized coating that enables CO₂ lasers to ablate more effectively than ever before.
The Global Electronics Association Hosts Successful WorksAsia-AI and Factory of the Future Technical Seminar
09/03/2025 | Global Electronics AssociationOn August 22, 2025, the Global Electronics Association hosted the successful WorksAsia-AI and Factory of the Future Technical Seminar during the exhibition Automation Taipei 2025. The seminar brought together 81 representatives from 58 companies, focusing on the latest applications of AI in smart factories and unveiling four key directions that will drive the electronics industry’s transition toward intelligence and sustainability.
TRI's AI-Powered Inspection Solutions at SMTAI 2025
09/02/2025 | TRITest Research, Inc. (TRI), the leading provider of test and inspection systems, will be joining the SMTA International Exposition & Conference. The event will be held from October 21 – 23, 2025, at the Donald E. Stephens Convention Center in Rosemont, IL, USA.
More Than a Competition: Instilling a Champion's Skill in IPC Masters China 2025
09/01/2025 | Evelyn Cui, Global Electronics Association—East AsiaNearly 500 elite professionals from the electronics industry, representing 18 provinces and municipalities across China, competed in the 2025 IPC Masters Competition China, March 26–28, in Pudong, Shanghai. A total of 114 contestants advanced to the practical competition after passing the IPC Standards Knowledge Competition. Sixty people competed in the Hand Soldering and Rework Competition (HSRC), 30 in the Cable and Wire Harness Assembly Competition (CWAC), and 24 in the Ball Grid Array/Bottom Termination Components (BGA/BTC) Rework Competition.