Dan’s Biz Bookshelf: ‘The Next RenAIssance: AI and the Expansion of Human Potential’
The Chemical Connection: When the Industry Moves Faster Than the Standards
Driving Innovation: Selecting the Right Laser Source
Grant to Develop Breakthrough Flexible Electronics
September 14, 2016 | ImecEstimated reading time: 2 minutes
World-leading nanoelectronics research center imec announces that Kris Myny, one of its young scientists, has been awarded an ERC Starting Grant. The grant of 1.5 million euros is earmarked to open up new research horizons in the field of thin-film transistor technology. This will allow a leap forward compared to current state-of-the-art and enable breakthrough applications in e.g. healthcare and the Internet-of-Things (IoT). ERC Starting Grants are awarded by the European Research Council to support excellent researchers at the stage at which they are starting their own independent research team after a stringent selection procedure; they are among the most prestigious of European research grants.
With his research, Kris Myny wants to realize a breakthrough in thin-film transistor technology, a technology used to create the large-area, flexible circuits that e.g. drive today's flat-panel displays.
Specifically, he wants to introduce design innovations of unipolar n-type transistor circuits based on amorphous Indium-Gallium-Zinc-Oxide (a-IGZO) as semiconductor. These are currently acknowledged as the most promising transistors for next-generation curved, flexible, or even rollable electronic applications.
Kris Myny: "My goal is to use these transistors to introduce a new logic family for building digital circuits that will drastically decrease the power consumption compared to current flexible circuits. And this of course without compromising the speed of the electronics. At the same time, we will also make the transistors smaller, in a way that is compatible with large-area manufacturing. In addition, I will also look at new techniques to design ultralow-power systems in the new logic style. These will allow building next-generation large-area flexible applications such as displays, IoT sensors, or wearable healthcare sensor patches." Conductive Ink Markets 2016-2026
In a recent press release, the European Commission announced that in 2017 it would invest a record 1.8 billion in its ERC grant scheme. A sizable part of the budget is earmarked for Starting Grants, reserved for young scientists with two to seven years of post-PhD experience. Jo De Boeck, imec's CTO says "We congratulate Kris Myny for all his valuable research culminating in this grant. Imec goes to great lengths to select and foster our young scientists and provide them with a world-class infrastructure. These ERC Starting Grants show that their work indeed meets the highest standards, comparable to any in Europe."
About imec
Imec performs world-leading research in nanoelectronics and photovoltaics. Imec leverages its scientific knowledge with the innovative power of its global partnerships in ICT, healthcare and energy. Imec delivers industry-relevant technology solutions. In a unique high-tech environment, its international top talent is committed to providing the building blocks for a better life in a sustainable society. Imec is headquartered in Leuven, Belgium, and has offices in Belgium, the Netherlands, Taiwan, USA, China, India and Japan. Its staff of about 2,500 people includes about 740 industrial residents and guest researchers. In 2015, imec's revenue (P&L) totaled 415 million euro.
Share on:
Subscribe
Stay ahead of the technologies shaping the future of electronics with our latest newsletter, Advanced Electronics Packaging Digest. Get expert insights on advanced packaging, materials, and system-level innovation, delivered straight to your inbox.Subscribe now to stay informed, competitive, and connected.
Suggested Items
The Missing Connection: Wire Harness Quoting Joins the Digital Age
05/01/2026 | Joanne Harris, Tech-2marketingWalk the floor of a modern wire harness manufacturing facility, and the investment in technology is hard to miss. Automated wire cutting and stripping machines process thousands of cuts an hour with sub-millimeter precision. Computerized crimping presses deliver consistent, validated terminations that a hand tool never could. Laser wire markers, automated test benches, and vision-guided assembly stations represent hundreds of thousands of dollars of capital investment, all in service of building a better harness faster and more reliably than the competition.
Everspin Executes $40M Agreement for Mil-Aero MRAM Applications
05/01/2026 | Everspin Technologies, Inc.Everspin Technologies, Inc., the world’s leading developer and manufacturer of Magnetoresistive Random Access Memory (MRAM) persistent memory solutions, announced an agreement with a U.S. prime contractor to provide state-of-the-art Toggle MRAM process technology capabilities and engineering services for United States Defense Industrial Base customers.
Everspin Executes $40M Agreement for Mil-Aero MRAM Applications
04/30/2026 | Everspin Technologies, Inc.Everspin Technologies, Inc., the world’s leading developer and manufacturer of Magnetoresistive Random Access Memory (MRAM) persistent memory solutions, announced an agreement with a U.S. prime contractor to provide state-of-the-art Toggle MRAM process technology capabilities and engineering services for United States Defense Industrial Base customers.
Swinburne University, Siemens Launch Australia’s First Quantum Timing Study for Smarter Power Grids
04/30/2026 | SiemensSwinburne University of Technology and Siemens are undertaking first-of-its-kind research in Australia, into how quantum-enhanced timing can help future-proof the energy grid and increase grid stability.
A Designer's Focus on High Density
04/30/2026 | Marcy LaRont, I-Connect007 MagazineVern Solberg is a distinguished member of the Global Electronics Association Raymond E. Pritchard Hall of Fame and has served as chair or vice chair of many committees, developing technical standards and implementation guidelines, including the IPC-7090 series, which focuses on design for manufacturing and reliability for electronic assemblies. He’s a long-time contributor to Design007 Magazine, and he conducted a half-day tutorial at APEX EXPO 2026, where he addressed 2D, 2.5D, and 3D packaging and ultra-high density hybrid bond interconnect. I caught up with Vern at the show and asked about his pivot from addressing more standard design challenges to his focus on high-density circuits.