-
- News
- Books
Featured Books
- smt007 Magazine
Latest Issues
Current IssueComing to Terms With AI
In this issue, we examine the profound effect artificial intelligence and machine learning are having on manufacturing and business processes. We follow technology, innovation, and money as automation becomes the new key indicator of growth in our industry.
Box Build
One trend is to add box build and final assembly to your product offering. In this issue, we explore the opportunities and risks of adding system assembly to your service portfolio.
IPC APEX EXPO 2024 Pre-show
This month’s issue devotes its pages to a comprehensive preview of the IPC APEX EXPO 2024 event. Whether your role is technical or business, if you're new-to-the-industry or seasoned veteran, you'll find value throughout this program.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - smt007 Magazine
Mitigation of Pure Tin Risk by Tin-Lead SMT Reflow – Results of an Industry Round-Robin
September 28, 2016 | David Pinsky, et al.Estimated reading time: 2 minutes
Abstract
The risk associated with whisker growth from pure tin solderable terminations is fully mitigated when all of the pure tin is dissolved into tin-lead solder during SMT reflow. In order to take full advantage of this phenomenon, it is necessary to understand the conditions under which such coverage can be assured. A round robin study has been performed by IPC Task group 8-81f, during which identical sets of test vehicles were assembled at multiple locations, in accordance with IPC J-STD-001, Class 3. All of the test vehicles were analyzed to determine the extent of complete tin dissolution on a variety of component types. Results of this study are presented together with relevant conclusions and recommendations to guide high-reliability end-users on the applicability and limitations of this mitigation strategy.
Background
Manufacturers of high reliability electronics have been working for many years to mitigate the deleterious effects of tin whisker formation. One highly effective means to suppress the growth of tin whiskers is to replace the pure tin plating with reflowed tin lead solder. (This approach is only available to manufacturers whose products are not subject to RoHS.) One approach to achieve total replacement of tin with tin lead solder is to perform a special hot solder dip process on the piece parts prior to assembly. Another approach is to fully consume the tin plating by tin lead solder during the SMT reflow process that occurs during circuit card assembly. This phenomenon of tin replacement during SMT reflow has been termed “self-mitigation,” because the components mitigate by themselves without the need of any special additional processing. Self-mitigation has many advantages over other forms of tin mitigation because it is: highly effective, adds no additional cost, and subjects the components to no additional handling.
The principal challenge to implementing self-mitigation as a standard practice is lack of confidence in the conditions under which components will reliably self-mitigate. Prior work concluded that for a specific set of process conditions, board finish, and pad design, self-mitigation can be predicted by the geometry of the component terminations[1]. It is not clear, however, how these results apply for different manufacturing processes, board finishes, and pad sizes. Without this understanding, the only reliable means for systems integrators to be confident that self-mitigation has been achieved on a given set of assemblies is to duplicate the conditions of the prior study, or to perform direct measurements on the as-received hardware.
The existence of this knowledge gap prompted the Pb-free Electronics Risk Management Council (PERM, IPC Committee 8-81) to initiate a project in 2014 under IPC task group 8-81F, to perform a study. The first phase of that study has been completed, and this report describes that study and the results to date.
Design of Experiment
The task team agreed to perform a new set of experiments involving the manufacture of identical sets of test vehicles at a number of different locations, all assembled to the requirements of IPC J-STD 001, Class 3. For simplicity, and to permit direct comparison with the results of the prior study, it was decided to use the same board layout and components from the prior study. Many potential factors for inclusion in the DOE were considered.
To read this entire article, which appeared in the September 2016 issue of SMT Magazine, click here.
Suggested Items
Indium Experts to Present on High-Temperature, Lead-Free Solder Paste and High Reliability Liquid Metal Alloys Poster at ECTC
05/16/2024 | Indium CorporationIndium Corporation Research Associate Kyle Aserian will deliver a presentation at the 74th Electronic Components and Technology Conference (ECTC) on May 31, in Denver, Colorado.
Indium Experts to Present at Electronics in Harsh Environments SMTA Conference
05/13/2024 | Indium Corporationndium Corporation Technical Manager for Europe, Africa, and the Middle East, Karthik Vijay, will deliver a technical presentation and Indium Corporation Senior Technologist, Dr. Ronald Lasky, will deliver both a workshop and technical presentation at the Electronics in Harsh Environments SMTA Conference on May 14-16 in Copenhagen, Denmark.
Connect the Dots: Designing for Reality—The Pre-Manufacturing Process
05/08/2024 | Matt Stevenson -- Column: Connect the DotsI have been working with Nolan Johnson on a podcast series about designing PCBs for the reality of manufacturing. By sharing lessons learned over a long career in the PCB industry, we hope to shorten learning curves and help designers produce better boards with less hassle and rework. Episode 2 deals with the electronic pre-manufacturing process. Moving from CAD (computer-aided design) to CAM (computer-aided manufacturing) is a key step in PCB manufacturing. CAM turns digital designs into instructions that machines can use to actually build the PCB.
AIM Solder Signs Shinil Fl Ltd. as New Distributor for Korea
05/08/2024 | AIM SolderAIM Solder, a leading global manufacturer of solder assembly materials for the electronics industry, is pleased to announce a new distribution partnership with Shinil Fl Ltd., a prominent supplier of technological solutions in the SMT and semiconductor sectors.
Indium Corporation to Showcase HIA Materials at ECTC
05/07/2024 | Indium CorporationAs an industry leader in innovative materials solutions for semiconductor packaging and assembly, Indium Corporation® will feature its advanced products designed to meet the evolving challenges of heterogeneous integration and assembly (HIA) and fine-pitch system-in-package (SiP) applications at the 74th Electronic Components and Technology Conference (ECTC), May 28‒31, in Denver, Colorado.