IPC Standards Committee Reports — Assembly and Joining, Product Assurance
November 22, 2016 | IPCEstimated reading time: 4 minutes
These standards committee reports from IPC’s 2016 Fall Committee Meetings have been compiled to help keep you up to date on IPC standards committee activities. This is the second in a series of reports.
Assembly and Joining
The 5-20 Product Assurance Committee reviewed the status of the projects in its scope and started planning for the meetings to be held at IPC APEX EXPO 2017.
The 5-21a Component mounting subcommittee met to discuss the update of the Guidelines for Printed Board Component Mounting. The new document, IPC-7070 will be created by combining parts of IPC-770, IPC-7351B, IPC-7093 and IPC-7095. The goal is to gather all the component information into one document to make it more user friendly.
The 5-21f Ball Grid Array Task Group continued its review of action items for IPC-7095D, Design and Assembly Process Implementation for BGAs. Particular focus at this meeting was spent on incorporating new information on column grid array (CGA) technology.
The 5-21g Flip Chip Mounting Task Group made the determination that it will go into full revision and not just an amendment for IPC-7094, Design and Assembly Process Implementation for Flip Chip and Die Size Components. A working draft IPC-7094A will be distributed to the task group before the end of 2016.
The 5-21h Bottom Termination Components Task Group reviewed a major overhaul proposed for the document for the A revision of IPC-7093, Design and Assembly Process Implementation for Bottom Termination SMT Components. These changes are being led by Matt Kelly with IBM and Udo Welzel with Bosch, who will present a polished working draft for task group review and comment in early 2017. Additionally, Matt Kelly was named vice-chair of the task group, replacing Vern Solberg, who stepped down from this role after years of service.
The 5-22a J-STD-001 Task Group reviewed comments on IPC J-STD-001, Requirements for Soldered Electrical and Electronic Assemblies. This task group met to resolve comments on criteria common to both IPC J-STD-001, Requirements for Soldered Electrical and Electronic Assemblies, and IPC-A-610, Acceptability for Electronic Assemblies. For the first time, the group also met at the same time with the Task Groups working on IPC-A-610, Acceptability for Electronic Assemblies and IPC/WHMA-A-620 Requirements and Acceptance for Cable and Wire Harness Assemblies to resolve differences between the three documents addressing the same criteria.
The 5-22ad Requirements for Military Systems Work Group continued a discussion on content to address hardware contracted by the U.S. Department of Defense and used in military systems. They previously discussed a separate addendum, however during this meeting, they took action to review the J-STD-001FS, Space Applications Electronic Hardware Addendum to IPC J-STD-001F Requirements for Soldered Electrical and Electronic Assemblies. They are considering a joint effort with that Task Group.
The 5-22as Task Group discussed review comments from the Final Industry Review of the addendum to 5-22as, Space Applications Electronic Hardware Addendum to IPC J-STD-001F Requirements for Soldered Electrical and Electronic Assemblies.
The 5-22f Task Group discussed comments to the document and prepared for a draft for Final Industry Review of the Handbook and Guide to Supplement J-STD-001.
The 5-22h Thermal Profiling Guide Task Group is preparing the ballot version of IPC-7530A, Guidelines for Temperature Profiling for Mass Soldering Processes (Reflow & Wave), once all comments from the Final Draft for Industry Review have been resolved. The task group plans to ballot IPC-7530A by the end of October and to publish by APEX EXPO 2017. This will be the first revision since its publication in 2001.
The 5-22k Bottom Termination Components Test Methods Task Group reviewed comments from the working draft distribution of IPC-TM-650, Test Method 2.4.35, Dye and Pry Test Method. The task group approved the draft to go to the 7-11 Test Methods Subcommittee for comment. The group will also seek out companies and test labs to participate in a gage R&R for the test method.
Product Assurance
The 7-30 Product Assurance Committee reviewed the status of the projects in its scope and started planning for IPC APEX EXPO 2017.
The 7-31b IPC-A-610 Task Group reviewed comments on IPC-A-610, Acceptability for Electronic Assemblies. The Task Group met to resolve comments on criteria comment to both IPC-A-610, Acceptability for Electronic Assemblies, and IPC J-STD-001, Requirements for Soldered Electrical and Electronic Assemblies.
The 7-31f Task Group met to discuss the comments received during the draft for final industry review period for IPC/WHMA-A-620, Requirements and Acceptance for Cable and Wire Harness Assemblies.
The 7-31k Wire Harness Design Task Group and 7-31h IPC-HDBK-620 Handbook Task Group continued working IPC-HDBK-620, Handbook and Guide to Supplement IPC-A-620.
The 7-31j Task Group continued working on a revision to IPC-A-630, Acceptability Standard for Manufacture, Inspection and Testing of Electronic Enclosures.
The 7-31m Fiber Optic Cable Acceptability Task Group met to discuss final changes and to resolve comments for IPC-A-640, Acceptance Requirements for Optical Fiber, Optical Cable and Hybrid Wiring Harness Assemblies. The task group plans to ballot the draft standard by the end of the year, so it will be approved for publication before APEX EXPO 2017.
The 7-34 Repairability Subcommittee reviewed comments submitted to IPC-7711/21, Rework, Modification and Repair of Electronic Assemblies, during the draft for final industry review period.
Suggested Items
Seeing a Future in Mexico
07/09/2025 | Michelle Te, I-Connect007The Global Electronics Association (formerly known as IPC) has been instrumental in fostering a partnership with Guanajuato, a state north of Mexico City with 12 industrial clusters and close to 150 companies involved in electronics. This past spring, Alejandro Hernández, the undersecretary for investment promotion in Guanajuato, attended IPC APEX EXPO 2025 at the invitation of IPC Mexico Director Lorena Villanueva, where he met with several companies to discuss the opportunities available in Mexico. He is inviting electronics-related companies seeking long-term investment in a centrally located area with access to highways, railways, and ports.
The Global Electronics Association Releases IPC-8911: First-Ever Conductive Yarn Standard for E-Textile Application
07/02/2025 | Global Electronics AssociationThe Global Electronics Association announces the release of IPC-8911, Requirements for Conductive Yarns for E-Textiles Applications. This first-of-its-kind global standard establishes a clear framework for classifying, designating, and qualifying conductive yarns—helping to address longstanding challenges in supply chain communication, product testing, and material selection within the growing e-textiles industry.
IPC-CFX, 2.0: How to Use the QPL Effectively
07/02/2025 | Chris Jorgensen, Global Electronics AssociationIn part one of this series, we discussed the new features in CFX Version 2.0 and their implications for improved inter-machine communication. But what about bringing this new functionality to the shop floor? The IPC-CFX-2591 QPL is a powerful technical resource for manufacturers seeking CFX-enabled equipment. The Qualified Product List (QPL) helps streamline equipment selection by listing models verified for CFX compliance through a robust third-party virtual qualification process.
The Knowledge Base: A Conference for Cleaning and Coating of Mission-critical Electronics
07/08/2025 | Mike Konrad -- Column: The Knowledge BaseIn electronics manufacturing, there’s a dangerous misconception that cleaning and coating are standalone options, that they operate in different lanes, and that one can compensate for the other. Let’s clear that up now. Cleaning and conformal coating are not separate decisions. They are two chapters in the same story—the story of reliability.
Advancing Aerospace Excellence: Emerald’s Medford Team Earns Space Addendum Certification
06/30/2025 | Emerald TechnologiesWe’re thrilled to announce a major achievement from our Medford, Oregon facility. Andy Abrigo has officially earned her credentials as a Certified IPC Trainer (CIT) under the IPC J-STD-001 Space Addendum, the leading industry standard for space and military-grade electronics manufacturing.