PNC Inc. Invests in LED Laser Direct Imaging system from Miva Technologies
June 22, 2017 | PNC Inc.Estimated reading time: 1 minute
This 2000L 2LE model is capable of imaging a maximum size 24” x 24” PC board or film size. With any large format film, positional accuracy can be a challenge but the Miva’s dynamic scaling feature can increase accuracy to minimize tolerance build-ups during the imaging process. Due to Miva’s optical registration system, innerlayer drill break-out will be reduced considerably on densely routed signal layers which will significantly improve yields. For sub-20-mil pitch parts or micro BGAs, a 2−3 mil solder dam will be possible to eliminate bridging during the assembly process.
“This LDI system represents a culmination of our efforts to find the most efficient equipment for each and every department in both manufacturing and assembly,” said PNC Inc. President, Sam Sangani.
Again, PNC stands by its commitment to quality and continuous improvement. Taking this next step to improve the manufacturing process helps them deliver the ever-increasing quality standards which they have become well known for.
About PNC Inc.
PNC Inc. is located in Nutley, NJ and is one of the country’s leading providers of rigid, rigid-flex and flex PCBs and the largest of their kind in the region. After adopting the Total Concept philosophy, PNC is now able to provide customers with PCB design, fabrication and assembly solutions all under one roof. PNC is a one-stop shop for all things related to PC boards, continuously expanding an extensive list of state-of-the-art equipment while maintaining a focus on energy and cost efficiency in order to provide the best product at the best price possible.
PNC Inc.’s ownership recently acquired Accurate Engineering Inc. in Sun Valley, CA. AEI’s primary focus is on high quality flex and rigid-flex PC boards for highly complex applications including aerospace and defense. Customers include Northrop Grumman, Boeing, Lockheed Martin, NASA and Raytheon.
Suggested Items
Connect the Dots: Designing for Reality—The Pre-Manufacturing Process
05/08/2024 | Matt Stevenson -- Column: Connect the DotsI have been working with Nolan Johnson on a podcast series about designing PCBs for the reality of manufacturing. By sharing lessons learned over a long career in the PCB industry, we hope to shorten learning curves and help designers produce better boards with less hassle and rework. Episode 2 deals with the electronic pre-manufacturing process. Moving from CAD (computer-aided design) to CAM (computer-aided manufacturing) is a key step in PCB manufacturing. CAM turns digital designs into instructions that machines can use to actually build the PCB.
AIM Solder Signs Shinil Fl Ltd. as New Distributor for Korea
05/08/2024 | AIM SolderAIM Solder, a leading global manufacturer of solder assembly materials for the electronics industry, is pleased to announce a new distribution partnership with Shinil Fl Ltd., a prominent supplier of technological solutions in the SMT and semiconductor sectors.
Indium Corporation to Showcase HIA Materials at ECTC
05/07/2024 | Indium CorporationAs an industry leader in innovative materials solutions for semiconductor packaging and assembly, Indium Corporation® will feature its advanced products designed to meet the evolving challenges of heterogeneous integration and assembly (HIA) and fine-pitch system-in-package (SiP) applications at the 74th Electronic Components and Technology Conference (ECTC), May 28‒31, in Denver, Colorado.
Indium Corporation Expert to Present on Pb-Free Solder for Die-Attach in Discrete Power Applications
04/30/2024 | Indium CorporationIndium Corporation Product Manager – Semiconductor Dean Payne will present at the Advanced Packaging for Power Electronics conference, hosted by IMAPS, held May 8-9 in Woburn, Massachusetts, USA.
Taiyo Circuit Automation Installs New DP3500 into Fuba Printed Circuits, Tunisia
04/25/2024 | Taiyo Circuit AutomationTaiyo Circuit Automation is proud to be partnered with Fuba Printed Circuits, Tunisia part of the OneTech Group of companies, a leading printed circuit board manufacturer based out of Bizerte, Tunisia, on their first installation of Taiyo Circuit Automation DP3500 coater.