Robots Can Heal Themselves
August 28, 2017 | VUBEstimated reading time: 1 minute
![](https://iconnect007.com/application/files/2616/3123/7851/Robot_polymer.jpg)
Cutting your hand, tearing a muscle, or even breaking a bone - these are all injuries that heal over time. Researchers at the Vrije Universiteit Brussel have also endowed robots with this self-healing property, as illustrated in their study “Self-healing soft pneumatic robots”, published in Science Robotics.
Research into soft robots has been underway for some time at the Vrije Universiteit Brussel (VUB). Inspired by the soft tissue from which humans and many other organisms are made, these robots are constructed from flexible materials. Their flexibility allows soft robots to be used for countless applications. They are used to grab delicate and soft objects in the food industry or in minimally invasive surgery. They also play an important role in rehabilitation and arm prostheses. The new technology was also picked up by Disney. The movie “Big Hero 6” introduces the inflatable robot, Baymax, a soft robot based on a working prototype. Being made from soft materials, soft robots can perform tasks in dynamic work environments while ensuring safe contact with humans. However, the soft materials also make them susceptible to damage caused by sharp objects or excessive pressure. Damaged components must be replaced to avoid the robot ending up on the scrap heap.
Rubbery polymers
In a prestigious European ERC project at the VUB, scientists have come up with a method that enables soft robots to completely heal from such damage. They build soft robots made completely from rubbery polymers with built-in healing capacity. When damaged, these materials first recover their original shape and then heal completely. This principle was applied in three self-healing robotic components: a gripper, a robotic hand, and an artificial muscle. These resilient, pneumatic components were damaged under controlled conditions, to test whether the scientific principle also works in practice. The results were most satisfactory: realistic damage could be healed completely without leaving any weak spots. After healing, the prototypes were able to fully resume their tasks.
Prof. Bram Vanderborght of BruBotics and Flanders Make: “The outcome of the research opens up promising perspectives. Robots can not only be made lighter and safer, they will also be able to work longer independently without requiring constant repairs.”
Self-healing soft pneumatic robots. Seppe Terryn, Joost Brancart, Dirk Lefeber, Guy Van Assche and Bram Vanderborght.
Suggested Items
Rogers Announces Further Actions to Streamline Operations and Drive Margin Improvement
06/07/2024 | Rogers CorporationRogers Corporation announced plans to drive further operational efficiency and margin improvement. Rogers intends to wind down manufacturing of advanced circuit materials and other related activities at its Evergem, Belgium factory by mid-2025.
The Pulse: Overconstraining: Short, Slim, and Smooth
06/06/2024 | Martyn Gaudion -- Column: The PulseEngineering is both an art and a science. The design engineer’s task is (almost) always to bring product to market that meets specifications at the best and most economical price suited to the appropriate end use requirements. From a PCB perspective, designers are faced with a bewildering and almost overwhelming choice of materials at their disposal.
Overconstrain? Underconstrain? Selecting Materials for High-speed Designs
06/06/2024 | Andy Shaughnessy, Design007 MagazineWhen selecting materials for a high-speed design, you need to be very familiar with the materials’ electrical characteristics, as well as the requirements of the PCB you’re designing. There are myriad details that need to be considered during the material selection process, and missing one iota can lead to your job being put on hold. We asked Stephen Chavez, principal technical product marketing manager at Siemens, to share his thoughts on material selection for high-speed designs. Steph discusses material constraints, stackups, and the cut-off point when a “traditional” laminate will (and won’t) work for a high-speed board.
DuPont’s Randal King Joins Purdue University’s Semiconductor Degrees Leadership Board
06/06/2024 | DuPontDuPont announced that Randal King, PhD, Vice President of R&D/Technology, DuPont Electronics & Industrial, has been named to Purdue University’s Semiconductor Degrees Leadership Board.
IPC Releases Newest List of Standards Updates, Revisions
06/03/2024 | IPCEach quarter, IPC releases a list of standards that are new or have been updated. To view a complete list of newly published standards and standards revisions, translations, proposed standards for ballot, final drafts for industry review, working drafts, and project approvals, visit ipc.org/status. These are the latest releases for Q2.