Optical Control of Magnetic Memory – New Insights Into Fundamental Mechanisms
August 30, 2017 | HZBEstimated reading time: 3 minutes
![](https://iconnect007.com/application/files/9216/3123/7925/Optical_Control1.jpg)
A research team at Helmholtz-Zentrum Berlin (HZB) has shown for the first time how laser modulation of magnetic properties in materials is influenced by thermal effects and how the process occurs under moderate experimental parameters. At the same time, the scientists discovered a previously unknown dependence on the thickness of the magnetic layer. This is an important clue for our theoretical understanding of optically controlled magnetic data storage media. The findings are published today in the journal Scientific Reports.
The demands placed on digital storage media are continuously increasing. Rapidly increasing quantities of data and new technological applications demand memory that can store large amounts of information in very little space and permit this information to be utilised dependably with high access speeds.
Re-writeable magnetic data storage devices using laser light appear to have especially good prospects. Researchers have been working on this new technology for several years. “However, there are still unresolved questions about the fundamental mechanisms and the exact manner in which optically controlled magnetic storage devices operate”, says Dr. Florian Kronast, assistant head of the Materials for Green Spintronics department at the Helmholtz-Zentrum Berlin (HZB).
A research team led by him has now succeeded in making an important step toward better understanding of this very promising storage technology. The scientists were able to empirically establish for the first time that the warming of the storage material by the energy of the laser light plays an instrumental role when toggling the magnetisation alignments and that the change in the material only takes place under certain conditions.
Making precise measurements in tiny laser spots
The HZB scientists together with those of Freie Universität Berlin and Universität Regensburg studied the microscopic processes at extremely high resolution while irradiating a thin layer of magnetic material using circularly polarised laser light. To do this, they directed the light of an infrared laser onto a nanometre-thick layer of alloy made from the metals terbium and iron (TbFe). What was special about the experimental set-up was that the narrowly focussed spot of laser light had a diameter of only three microns. “That is far less than was usual in prior experiments”, says HZB scientist Ashima Arora, first author of the study. And it provided the researchers with unsurpassed detail resolution for studying the phenomena. The images of the magnetic domains in the alloy that the team created with the help of X-rays from the BESSY II synchrotron radiation source revealed fine features that themselves were only 30 nanometres in size.
The crucial thing occurs in the boundary ring
The results of the measurements prove that a ring-shaped region forms around the tiny laser spot and separates the two magnetically contrasting domains from one another. The extant magnetisation pattern inside the ring is completely erased by the thermal energy of the laser light. Outside the ring, however, it remains in its original state. Within the boundary zone itself, a temperature distribution arises that facilitates a change in magnetisation by displacing the domain boundaries. “It is only there that the toggling of magnetic properties can proceed, permitting a device to store re-writeable data”, explains Arora.
Surprising influence of the layer thickness
“These new insights will assist in the development of optically controlled magnetic storage devices having the best possible properties,” in the view of Kronast. An additional effect contributes to better understanding the physical processes that are important in this phenomenon, which researchers at HZB unexpectedly observed for the first time. The way the toggling of the magnetisations happens is highly dependent on the layer thickness of the material irradiated by the laser. It changes over an interval of 10 to 20 nanometres thickness.
“This is a clear indication that two contrasting mechanisms are involved and compete with one another”, Kronast explains. He and his team suspect two complex physical effects for this. To confirm their suspicions, though, further empirical and theoretical studies are necessary.
Suggested Items
NASA’s Roman Mission Gets Cosmic ‘Sneak Peek’ From Argonne Supercomputer
06/14/2024 | BUSINESS WIREResearchers are diving into a synthetic universe to help us better understand the real one. Using the Theta supercomputer at the U.S. Department of Energy’s (DOE) Argonne National Laboratory in Illinois, scientists have created nearly four million simulated images depicting the cosmos as NASA’s Nancy Grace Roman Space Telescope and the Vera C. Rubin Observatory in Chile, jointly funded by the National Science Foundation (NSF) and DOE, will see it.
Hera and its CubeSats Speak with Mission Control
06/14/2024 | ESAESA’s Hera asteroid mission and its two CubeSats interacted as if they were in space, within the foam pyramid-lined walls of the Agency’s Maxwell test chamber in the Netherlands.
Global Leader Implements Ucamco's Jayda Software: Revolutionizing Online PCB Procurement
06/12/2024 | UcamcoUcamco proudly announces that a global leader has implemented Ucamco’s groundbreaking Jayda software in its new web shop. This strategic collaboration represents a significant leap forward in redefining the landscape of online PCB procurement, leveraging Jayda's capabilities to streamline and revolutionize the industry.
Gartner Forecasts MENA IT Spending to Grow 5% in 2024
06/12/2024 | Gartner, Inc.IT spending in the Middle East and North Africa (MENA) region is forecast to total $193.7 billion in 2024, an increase of 5.2% from 2023, according to the latest forecast by Gartner, Inc. The annual growth is down from 6.6% growth in 2023.
Northrop Grumman Extends Operations, Sustainment and Support for BACN to 2027
06/07/2024 | Northrop GrummanThe U.S. Air Force awarded Northrop Grumman Corporation a task order for continued Battlefield Airborne Communications Node (BACN) operations, sustainment and support through January 2027.