-
- News
- Books
Featured Books
- smt007 Magazine
Latest Issues
Current IssueComing to Terms With AI
In this issue, we examine the profound effect artificial intelligence and machine learning are having on manufacturing and business processes. We follow technology, innovation, and money as automation becomes the new key indicator of growth in our industry.
Box Build
One trend is to add box build and final assembly to your product offering. In this issue, we explore the opportunities and risks of adding system assembly to your service portfolio.
IPC APEX EXPO 2024 Pre-show
This month’s issue devotes its pages to a comprehensive preview of the IPC APEX EXPO 2024 event. Whether your role is technical or business, if you're new-to-the-industry or seasoned veteran, you'll find value throughout this program.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - smt007 Magazine
Dealing with Vias-in-Pad
November 8, 2017 | Stephen Las Marias, I-Connect007Estimated reading time: 4 minutes
Screaming Circuits, a division of EMS firm Milwaukee Electronics, specializes in short-run, one-off, and prototype PCB assembly. For instance, if you need two or three prototypes and you need them in just a couple of days—that's what the company does. Or if you need 500 or 5,000 production boards, for example, if you had a Kickstarter and you sold 500 and you don’t know if you’ll sell any more—most manufacturing companies don’t want that business, but that’s where Screaming Circuits comes in.
It's all about small volumes, unforecastable, uncertain volumes, according to Duane Benson, chief technology officer and marketing manager of Screaming Circuits. "That gives us a very large set of experience because we see so many different jobs; we see virtually any kind of component tree applications that you might possibly imagine."
In another interview, Mike Creeden, vice president of layout services at sister company San Diego PCB Design LLC, said via-in-pad, even if it's a plated through-hole via, is a form of HDI.
With that in mind, I interviewed Benson about the challenges when dealing with microvias and vias-in-pads from an assembly standpoint, and how in-circuit test (ICT) issues, such as access to test points, can be addressed. Generally, Benson said there's not that much issue for the assemblers when it comes to microvias or HDI. However, he notes that no matter how small the vias are, especially in via-in-pad, they have to be plugged and filled at the fabricator side, must be plated over, and has to have a very planar surface.
"That's the biggest challenge with the high-density vias—making sure that they’re properly plugged and plated at the board house, and then that they leave a planar surface. If it's nice and flat like that, for assembly purposes, it doesn't matter—we don't really know that it's there really. Some people like to leave the microvias partially open—there would be a via open going from one layer to the next. With the tiny micro BGA, if you do that, you are going to end up with an air bubble inside the BGA ball, which might crack under stress, and it might not totally connect," said Benson. "Basically, the only thing for a super fine pitch BGAs and those types of vias, the only proper way to avoid assembly problems is to have them filled and plated at the board house, and leaving a flat, planar surface. That's really the only option. Between the pads, you have to make sure that there is a complete and total solder mask dam between the pad and the via."
If vias are open, there's this possibility of solder flowing into them during the reflow process. "You can end up with outgassing—flux that didn’t fully activate. It's just bad news," said Benson. "Really, with microvias, especially when it comes to BGA pads, you got to have them plugged and filled at the board house. You got to have a nice, flat, planar metal surface; there's really no other option for assembly with those tiny little parts. We would normally catch that before it goes to the board house. So, then we would go back to the designer, one of our manufacturing engineers would call them up, and let them know how to avoid that. If the via is in the pad, the two ways to avoid that are: (a) move it outside of the pad; or (b) connect with the board house and let them fill it and plate it over. We would give that advice to the designer."
Another issue with via-in-pads is the limited access for ICT. Screaming Circuits, however, typically doesn’t do these tests because it is just dealing with prototypes. "What our volume production facility, Milwaukee Electronics, a more-traditional EMS, typically would do is our engineers would go back to the designer. If the test program is needed, we will have to say, 'We can't test without a test point here.' Quite often, you will end up with a hybrid of either bed of nails or flying probe, and a functional test. You can detect a lot of problems with a functional test, even if the pads are underneath the BGAs or hidden. But not everything. You will end up with some test points added in and potentially use of software-based testing system," said Benson.
"In the prototype world, we make do with what we got. But when we are going to build hundreds or thousands, or tens of thousands of things, we will have to have our manufacturing engineers connected with the design engineers before those volume productions. Sometimes, what's going to happen is we’ll get a prototype, we’ll build it, and they will modify the design, then build it again, and then say, 'We're ready to go to volume production.' Then, we'll go through an additional NPI process. If we found that it can’t be tested, or it can’t be reliably built because of some of those issues, whether they are HDI related or not, we would give them guidance on where or how to modify the designs so that they will be reliable and testable."
Suggested Items
TRI Opens New Manufacturing Facility
05/16/2024 | TRITest Research, Inc. (TRI), the leading test and inspection systems provider for the electronics manufacturing industry, announced that it has opened a state-of-the-art R&D and manufacturing facility.
Real Time with… IPC APEX EXPO 2024: Circuit Board Testing Strategies and the Impact of AI
05/08/2024 |Editor Marcy LaRont speaks with Bert Horner, president of The Test Connection, about the importance of strategic planning and design-for-test (DFT). Bert touches on some common mistakes that occur when DFT is not adequately considered early on. The discussion outlines an overarching industry need for a culture shift toward increasingly higher levels of integration and collaboration. Bert mentions that AI now has an influence on testing, as everywhere else, and announces his forthcoming book.
Real Time with… IPC APEX EXPO 2024: Understanding Objective Evidence in Manufacturing Processes
05/07/2024 | Real Time with...IPC APEX EXPOGraham Naisbitt explains the importance of objective evidence in manufacturing processes, debunking the common misconception that the ROSE test is a cleanliness test. He also discusses the introduction of Rev J, a requirement for measuring ionic contamination on circuit assemblies, and the challenges in accurately measuring contamination. Alternative methods like ion chromatography and the need for updating standards like the ROSE test are mentioned.
U.S. Air Force Secretary Kendall Flies in AI-Piloted X-62A VISTA
05/06/2024 | Lockheed MartinLockheed Martin Skunk Works joined the U.S. Air Force Test Pilot School and other government and industry partners in hosting U.S. Secretary of the Air Force Frank Kendall to fly in the X-62A Variable In-flight Simulation Test Aircraft (VISTA), a one-of-a-kind aircraft modified to test artificial intelligence (AI) and autonomy capabilities.
Real Time with… IPC APEX EXPO 2024: Software Solutions for Circuit Board Challenges
05/03/2024 | Real Time with...IPC APEX EXPONolan Johnson speaks with Will Webb from Aster Technologies about their software solutions for design teams, manufacturing, test engineers, and process engineers. Aster's software addresses the increasing complexities of circuit boards and the need for alternative testing methods.