IPC Releases IPC/PERM-2901, Pb-free Design and Assembly Implementation Guide
February 19, 2018 | IPCEstimated reading time: 2 minutes
IPC—Association Connecting Electronics Industries' Pb-free Electronics Risk Management (PERM) Council has developed the first single document dedicated solely to assisting design engineering in the development of electronics that are completely lead-free (Pb-free) and meet the demanding requirements of aerospace, defense and high performance (ADHP) products and systems.
IPC/PERM-2901, Pb-free Design and Implementation Guide, provides an in-depth review of printed board defects, manufacturing and soldering processes, supply chain control, selection, use and assembly with commercial off-the-shelf (COTS) products and obsolescence management.
While the commercial electronics industry has almost eliminated the need for tin-lead (SnPb) based electronics systems and products, the ADHP industry, due to a lack of industry-accepted reliability models for Pb-free interconnections, has continued to rely on SnPb for their products. As it becomes more cost-prohibitive for the ADHP industry to continue to use SnPb products, and with failure mechanisms for Pb-free materials being significantly different than SnPb materials, gaining knowledge and understanding of how Pb-free materials affect the ADHP industry has become critical.
Although many technical papers and industry studies have been published addressing the Pb-free soldering process over the past 20 years, the IPC/PERM-2901, Pb-free Design and Implementation Guide is the first to assist design engineering, quality assurance and manufacturing engineering in understanding and appreciating the differences in mechanical and physical behaviors of Pb-free soldering and providing avenues for risk mitigation.
This guideline specifically addresses the “delta” differences between SnPb and Pb-free solder technologies relative to manufacturing the same products. The differences in these solder technologies are generally categorized (with respect to Pb-free solder alloys) as:
- Typically poorer wetting ability
- Differences in appearance and inspection criteria
- Typically higher melting temperature
- Potential tighter process window for repair/rework
- Increased potential of tin whiskers
The PERM Council, comprised of global participants from government, military, medical, academia and other not-for-profit organizations, along with private companies, was created to address the need for how Pb-free materials directly affect product performance, reliability and service life.
The European Union’s Restriction of Hazardous Substances (RoHS) profoundly affected the electronics industry when lead was listed as a restricted substance. According to Linda L. Woody, formerly of Lockheed Martin and former PERM Council Chair, “ADHP systems and products have a broad range of performance requirements, and have relied on SnPb products for decades. We created the guideline to ease the transition from SnPb to Pb-free, and to help the industry meet the demanding requirements of the ADHP systems and products.”
About IPC
IPC is a global industry association based in Bannockburn, Ill., dedicated to the competitive excellence and financial success of its 4,300-member companies which represent all facets of the electronics industry, including design, printed board manufacturing, electronics assembly and test. As a member-driven organization and leading source for industry standards, training, market research and public policy advocacy, IPC supports programs to meet the needs of an estimated $2 trillion global electronics industry. IPC maintains additional offices in Taos, N.M.; Washington, D.C.; Atlanta, GA.; Brussels, Belgium; Stockholm, Sweden; Moscow, Russia; Bangalore and New Delhi, India; Bangkok, Thailand; and Qingdao, Shanghai, Shenzhen, Chengdu, Suzhou and Beijing, China. For more information, click here.
Suggested Items
Connect the Dots: Designing for Reality—The Pre-Manufacturing Process
05/08/2024 | Matt Stevenson -- Column: Connect the DotsI have been working with Nolan Johnson on a podcast series about designing PCBs for the reality of manufacturing. By sharing lessons learned over a long career in the PCB industry, we hope to shorten learning curves and help designers produce better boards with less hassle and rework. Episode 2 deals with the electronic pre-manufacturing process. Moving from CAD (computer-aided design) to CAM (computer-aided manufacturing) is a key step in PCB manufacturing. CAM turns digital designs into instructions that machines can use to actually build the PCB.
AIM Solder Signs Shinil Fl Ltd. as New Distributor for Korea
05/08/2024 | AIM SolderAIM Solder, a leading global manufacturer of solder assembly materials for the electronics industry, is pleased to announce a new distribution partnership with Shinil Fl Ltd., a prominent supplier of technological solutions in the SMT and semiconductor sectors.
Indium Corporation to Showcase HIA Materials at ECTC
05/07/2024 | Indium CorporationAs an industry leader in innovative materials solutions for semiconductor packaging and assembly, Indium Corporation® will feature its advanced products designed to meet the evolving challenges of heterogeneous integration and assembly (HIA) and fine-pitch system-in-package (SiP) applications at the 74th Electronic Components and Technology Conference (ECTC), May 28‒31, in Denver, Colorado.
Indium Corporation Expert to Present on Pb-Free Solder for Die-Attach in Discrete Power Applications
04/30/2024 | Indium CorporationIndium Corporation Product Manager – Semiconductor Dean Payne will present at the Advanced Packaging for Power Electronics conference, hosted by IMAPS, held May 8-9 in Woburn, Massachusetts, USA.
Taiyo Circuit Automation Installs New DP3500 into Fuba Printed Circuits, Tunisia
04/25/2024 | Taiyo Circuit AutomationTaiyo Circuit Automation is proud to be partnered with Fuba Printed Circuits, Tunisia part of the OneTech Group of companies, a leading printed circuit board manufacturer based out of Bizerte, Tunisia, on their first installation of Taiyo Circuit Automation DP3500 coater.