Flexible Thinking: Rules of Thumb—A Word to the Wise
Happy’s Tech Talk #29: Bend-to-Install Semi-flex FR-4
Connect the Dots: Five Best Practices for Designing Flex and Rigid-flex PCBs
NPL to Hold Webinar on Reliability and Fitness for Purpose Testing of Flexible and Wearable Electronics
March 8, 2018 | National Physical LaboratoryEstimated reading time: Less than a minute
Wearable electronics encompass a wide area of devices, including those embedded as flexibles, hybrid-systems and textiles.
Typically in the electronics industry, the National Physical Laboratory (NPL) tests the reliability of electronic assemblies using high humidity and high temperature as an accelerating factor. For many of the substrate materials involved, the use of high temperature is not appropriate to accelerate failure mechanisms to help predict device reliability.
Additionally, high temperature is not always reflective of typical (or harsh) operating conditions for wearables, so NPL had investigated alternative suitable methods for testing these devices. Typical measurements include flex/bend testing, washing machine durability tests, stretch and stress testing.
The NPL is increasingly looking at methods for testing devices subjected to combinatorial harsh environments, where the test is composed of multiple stress factors which is more akin to real life use. Understanding the resulting failure modes observed from these tests is crucial for identifying the weak links limiting the device's reliability.
In line with this, NPL will be holding a webinar titled "Reliability and Fitness for Purpose Testing of Flexible and Wearable Electronics" on Tuesday, March 20, 2018, at 14:30 (UTC).
For more information or to register, click here.
Share on:
Suggested Items
NPL Webinar on Reliability and Fitness for Purpose Testing of Flexible and Wearable Electronics
02/13/2018 | National Physical LaboratoryNPL will be holding a webinar on reliability and fitness for purpose testing of flexible and wearable electronics on Tuesday, March 20, 2018, at 14:30 UTC.
NPL Webinar on Characterization of High-Temp Component Interconnect Materials
12/13/2016 | National Physical LaboratoryThe UK's National Physical Laboratory (NPL) is being partnered with several end-users to better characterize alternatives for high temperature component interconnect to operate above 200°C.
Condensation Testing—A New Approach
08/02/2016 | Chris Hunt and Ling Zou, National Physical Laboratory, and Phil Kinner, Electrolube LtdWhile the characterization of coating performance under high humidity conditions is detailed in well accepted IPC and IEC standards, the performance and testing under condensing conditions is not so well developed. This article talks about a new approach that has been developed where the test board is mounted on a substrate whose temperature can be independently controlled without changing the ambient condition.
Improving Test and Inspection
07/05/2016 | Stephen Las Marias, I-Connect007In our recent survey on PCBA test and inspection challenges, respondents consider the following to be among their biggest problems: probing to narrower traces and pads; testing boards with smaller and finer features and sizes; dry solder and other solder-related issues; finding sublayer defects; dealing with flat, no-lead components; and testing cycle time. This month, we look into different PCBA test and inspection strategies that address the key challenges in today’s electronics manufacturing and assembly environment.
NPL Schedules November Webinars
11/03/2015 | National Physical LaboratoryNPL will hold a webinar on CAF failures as well as on measuring coating protection performance under condensing conditions this month.