Flexible PCB Market to Reach $61.75B by 2032, Driven by the Demand for Compact Electronics, Automotive and Medical Applications
May 16, 2025 | Globe NewswireEstimated reading time: 2 minutes
Flexible PCB Market to Reach $61.75B by 2032, Driven by the Demand for Compact Electronics, Automotive and Medical Applications
According to the SNS Insider, “The Flexible PCB Market was valued at USD 21.42 billion in 2023 and is expected to reach $61.75 billion by 2032, growing at a CAGR of 12.52% over the forecast period 2024-2032.”
Growth of the Flexible PCB Market Driven by Demand for Miniaturized Electronics and Automotive Systems
Rising adoption of miniaturized, lightweight, and high-performance electronics in various application industries is boosting growth of the market for Flexible PCB Market. Compact and flexible circuits increasingly come into play in consumer electronics like smartphones, wearables and foldable devices. Moreover, rising penetration of electric vehicles (EVs) and ADAS in the automotive industry is increasing the utilization of flexible PCBs that provide enhanced signal integrity, lightweight material, and durability in complex automotive modules. U.S. Flexible PCB Market is expected to reach USD 1.80 Billion by 2023, at a CAGR of 13.53%.
Flexible PCB Market Growth by Type and End Use Key Trends and Projections
By Type
Double-sided FPCBs held the largest market share in 2023 at 44.3%, providing highly sophisticated circuitry This would result in cost-effective, spatially-efficient circuit design. They are more complicated to manufacture than single-sided boards, but can be lean enough to be mass-produced on a budget, lending them scrutiny in consumer electronics, automotive, and other industries.
Multilayer FPCBs, expected to grow at the highest CAGR from 2024 to 2032, are developed to address the need for miniaturization, high electrical performance and stability in compact electronics, such as mobile phones, medical, aerospace, and 5G devices. These boards allow for more features and reliability, satisfying the demand for more miniaturization in the industry, even under conditions of narrow installation.
By End Use
In 2023, the Consumer Electronics segment led the Flexible PCB market with a 51.3% share, as a result of the high demand for flexible and lightweight circuits solutions in devices such as smartphones, tablets, laptops, smartwatches and similar wearable devices. Consumer electronic devices have continued to minimize and aggregated while evolution to smarT terminals more increased FPCB demands.
The IT & Telecom segment is expected to register the fastest growth from 2024 to 2032, n account of 5G infrastructure expansion, investments in data centers and rising demand for high-speed communication equipment.
Flexible PCB Market Growth in Asia Pacific and North America
In 2023, Asia Pacific dominated the Flexible PCB market with a 74.7% share, driven by a robust manufacturing ecosystem and leading electronics producers like China, Japan, South Korea, and Taiwan. Major companies such as Samsung Electronics, Sony, and Foxconn rely heavily on flexible PCBs for devices like smartphones, smartwatches, and display modules. Additionally, increasing demand for electric vehicles and wearable devices in the region is fueling market growth, positioning Asia Pacific as both a production hub and a major consumer.
North America is expected to experience the highest CAGR from 2024 to 2032, on account of progress in 5G, aerospace, defense, and medical applications. Businesses of Lockheed Martin and Raytheon Technologies are increasingly adopting rigid-flex PCBs in defense systems, and companies of Cisco and Qualcomm are spurring demand for high-performance FPCBs in telecom and IoT equipment. Increasing R&D spends and high end applications are projected to drive the market in the region.
Suggested Items
PCBAA Wins Summit Silver Award from the American Society of Association Executives
07/18/2025 | PCBAAPCBAA was one of 38 associations that earned Silver Awards for outstanding contributions for an entry titled: Chips Don’t Float: More Printed Circuit Boards Must be Made in America.
INSPECTIS AB ‘Makes it a Meal’ with Series U50s Advanced Kit
07/18/2025 | INSPECTIS ABFamous chefs the world over maintain that an entrée doesn’t make a great meal without side dishes. At INSPECTIS, we call those ‘sides’ an Advanced Kit.
July 2025 PCB007 Magazine: Sales—From Pitch to PO
07/18/2025 |Though all parts of a company are essential for holistic success, it is a foundational truth that a company lives and dies by its sales. If there are no sales, the company eventually ceases to exist, or as Henry Ford says, “Nothing happens until someone sells something.” In the July issue of PCB007 Magazine, we break down the sales stack and provide a guide to up your sales game.
Silicon Mountain Contract Services Enhances SMT Capabilities with New HELLER Reflow Oven
07/17/2025 | Silicon Mountain Contract ServicesSilicon Mountain Contract Services, a leading provider of custom electronics manufacturing solutions, is proud to announce a significant upgrade to its SMT production capability with the addition of a HELLER 2043 MK5 10‑zone reflow oven to its Nampa facility.
KONIG Launches KP400: Advanced 3D Digital Conformal Coating System for High-Density Electronics
07/15/2025 | KONIGKONIG, a leader in electronic packaging protection solutions, is proud to announce the launch of the KP400 3D Digital Packaging Solution—a breakthrough conformal coating system that brings new levels of precision, speed, and material efficiency to electronics manufacturing.