Making Rusty Polymers for Energy Storage
April 2, 2018 | Washington University in St. LouisEstimated reading time: 1 minute
It’s called a nanoflower, but if you could brush your cheek against its microscopic petals, you would find them cool, hard and … rusty.
Image caption: This colored image depicts a poly (3,4-ethylenedioxythiophene) (PEDOT) nanoflower synthesized via hydrolysis-assisted vapor-phase polymerization using ethanol as a solvent. The blue color represents PEDOT, and the red color represents iron oxide species that serve as a scaffold and assist in the growth of PEDOT nanostructures in situ during synthesis. (Image: D’Arcy lab/Washington University)
Common rust forms the inner skeleton of these lovely and intricate nanostructures, while their outer layer is a kind of plastic.
Researchers at Washington University in St. Louis have developed a straightforward way to make this type of conducting polymer with high surface area that is likely to be useful for energy transfer and storage applications.
“Rust will always pose a challenge in Earth’s humid and oxygenated atmosphere,” said Julio M. D’Arcy, assistant professor of chemistry in Arts & Sciences and a member of the university’s Institute of Materials Science and Engineering. “Corrosion makes structures fragile and decreases the ability of components to function properly. But in our lab, we’ve learned how to control the growth of rust so that it can serve an important purpose.”
Conducting polymers rely on a combination of organic and inorganic materials — usually a core of metal and a shell of plastic — made in a single batch.
D’Arcy and his team reported on a new technique that combines vapor-phase synthesis with solution-based hydrolysis to build three-dimensional nanoflowers, two-dimensional nanoplates and one-dimensional nanofibers.
This work advances the understanding of the chemical mechanisms involved with depositing the rust and forming the polymer, which will allow scientists to more easily manipulate and engineer the structures of the materials they make.
“As chemists, my students and I are fascinated by conducting polymers because we can control their structure during synthesis,” D’Arcy said. “How much electricity the polymers conduct is a function of their chemical pathway and their number of charge carriers, both of which can be optimized during synthesis.”
As for the nanoflowers, D’Arcy said he will be sowing some new seeds soon. There are 16 stable phases of rust, all with different morphologies at the nanoscale — enough for a whole rusted garden.
Suggested Items
BWXT to Acquire L3Harris’ A.O.T. Business to Expand Special Materials Portfolio
11/05/2024 | L3Harris TechnologiesBWX Technologies, Inc. and L3Harris Technologies, Inc. announced the signing of a purchase agreement for BWXT to acquire L3Harris’ Aerojet Ordnance Tennessee, Inc. (A.O.T.) business for approximately $100 million.
Solid-State Batteries Enter Pilot Production, Costs Expected to Drop to CNY 0.6–0.7/Wh by 2035
11/01/2024 | TrendForceThe global pursuit and anticipation of applications for solid-state batteries (SSBs) have accelerated the commercialization process of this technology.
Robots in Logistics Boom Worldwide
10/31/2024 | BUSINESS WIREThe demand for robots for transport and logistics is increasing: Almost 113,000 robots were sold for transport and logistics tasks in 2023 – up 35%. These results are published by VDMA Materials Handling and Intralogistics Association in cooperation with the IFR.
Machine Learning Can Predict the Mechanical Properties of Polymers
10/30/2024 | ACN NewswirePolymers such as polypropylene are fundamental materials in the modern world, found in everything from computers to cars. Because of their ubiquity, it’s vital that materials scientists know exactly how each newly developed polymer will perform under different preparation conditions.
DELO Introduces UV-approach for Fan-out Wafer-level Packaging
10/25/2024 | DELODELO has developed a new approach for fan-out wafer-level packaging (FOWLP). Its feasibility study shows: With the use of UV-curable molding materials instead of heat curing ones, warpage and die shift can be reduced significantly. Additionally, this leads to improvements in curing time and minimizes the energy consumption.