Life-Span of New Solar Cell Technologies to Increase Even Tenfold
April 16, 2018 | Aalto UniversityEstimated reading time: 2 minutes

Armi Tiihonen defended her doctoral dissertation at Aalto University 6 April 2018 on the ageing of new kinds of perovskite and dye-sensitised solar cells. She has developed ways to increase the lifetime of solar cells and also proposes ways to improve ageing tests for them.
'Perovskite solar cells have not previously been studied using a fast, low-threshold photography method. With it, we could detect even the slightest disintegration in the perovskite. This could mean that in some instances, our photography method could replace a more thorough and laborious method called X-ray crystallography', says doctoral student Armi Tiihonen.
The photography method can help to determine when X-ray crystallography may be needed. If no changes can be detected in the photography, crystallography can be postponed. Photography also yielded more reliable results than optical measurement devices, for example.
The detection is based on changes in colour that aging often induces in the cells. The electrolytes in dye-sensitised cells contain iodine that is bright yellow and gradually turns transparent with age. Likewise, perovskite cells turn from a very dark colour into yellow as the perovskite disintegrates. Once these changes become measurable, the aging process can be analysed quantitatively.
The photographic method could be useful in industrial production of both perovskite and dye-sensitised solar cells because it is a fast and cost-effective way to detect changes brought on by aging.
Tiihonen’s research includes extensive analysis of ageing tests of perovskite and dye-sensitised solar cells, and serious shortcomings were observed in them. Furthermore, Tiihonen with her colleagues present ways to increase the life-span of the cells by reducing the bleaching in the electrolytes.
'Understanding the ageing mechanism is very important. By modifying the cell structure and the electrolyte we have managed to achieve as much as a tenfold increase in the lifetime of solar cells,’ emphasises Docent Kati Miettunen.
In comparing iodine and cobalt electrolytes, ageing was observed to slow down when the charge carrier was switched. It turned out that iodine electrolytes are not the more resilient one of the two, as had been assumed.
'We studied the effects of environmental factors on the bleaching of the electrolytes and the ageing of the cells. Reducing impurities, such as water, and filtering UV light were important, but the benefits gleaned from these proved less significant than we had anticipated,’ Tiihonen adds.
Dye-sensitized cells have extensive application possibilities, as they can be made out of many different combinations of materials and in many different colours. Perovskite cells, meanwhile, are very much in vogue because of their rapid development: their efficiency has increased nearly tenfold in a decade to about 20 per cent.
In addition to their research work, Armi Tiihonen, Kati Miettunen, Janne Halme and professor Peter Lund have actively proposed improvements to the research in their field. Most recently, they have issued a letter to Science magazine stating that with better-quality ageing tests it would be possible to extend the lifetime of perovskite and dye-sensitised solar cells.
Testimonial
"Our marketing partnership with I-Connect007 is already delivering. Just a day after our press release went live, we received a direct inquiry about our updated products!"
Rachael Temple - AlltematedSuggested Items
Weaning the U.S. Military Off a Tablet Supply Chain That Leads to China
09/08/2025 | Jim Will, USPAETablet computers are essential to how our military fights, moves and sustains, but these devices are built on a fragile global supply chain with strong ties to China. Building domestic manufacturing to eliminate this vulnerability is feasible if we tap into the information and capabilities that already exist and create strong demand for tablets produced by trusted and assured sources.
Fresh PCB Concepts: Designing for Success at the Rigid-flex Transition Area
08/28/2025 | Team NCAB -- Column: Fresh PCB ConceptsRigid-flex PCBs come in all shapes and sizes. Manufacturers typically use fire-retardant, grade 4 (FR-4) materials in the rigid section and flexible polyimide materials in the flex region. Because of the small size, some rigid-flex PCBs, like those for hearing aid devices, are among the most challenging to manufacture. However, regardless of its size, we should not neglect the transition area between the rigid and flexible material.
Semiconductors Get Magnetic Boost with New Method from UCLA Researchers
07/31/2025 | UCLA NewsroomA new method for combining magnetic elements with semiconductors — which are vital materials for computers and other electronic devices — was unveiled by a research team led by the California NanoSystems Institute at UCLA.
Japan’s OHISAMA Project Aims to Beam Solar Power from Space This Year
07/14/2025 | I-Connect007 Editorial TeamJapan could be on the cusp of making history with its OHISAMA project in its quest to become the first country to transmit solar power from space to Earth, The Volt reported.
The Big Picture: Our Big ‘Why’ in the Age of AI
06/25/2025 | Mehul Davé -- Column: The Big PictureWith advanced technology, Tesla, Google, Microsoft, and OpenAI can quickly transform life as we know it. Several notable artificial intelligence (AI) studies, including the 2024 McKinsey Global Survey on AI, have offered insights into AI’s adoption, impact, and trajectory. The McKinsey study revealed that AI adoption continues to grow, with 50% of respondents reporting using AI in at least one business area.