Defense Speak Interpreted: Is There Still a CHIPS Act?
Beyond the Board: Empowering the Next Generation of Tech Innovators in Electronics
The Government Circuit: Trump’s Trade War Disrupts the Electronics Ecosystem
Oxford PV Leads Consortium to Prepare Perovskite Solar Cells for High Volume Manufacturing
August 24, 2018 | Oxford PVEstimated reading time: 1 minute
The Perovskite Company announced a new consortium to further demonstrate the manufacturability of perovskite-silicon tandem solar cells. The project has received Euro 2.8 million from the German Ministry of Economic Affairs and Energy as part of its wider investment programme into renewable energy development.
The consortium led by Oxford PV additionally comprises VON ARDENNE GmbH, Helmholtz-Zentrum Berlin, Fraunhofer Institute for Solar Energy Systems, and the Technical University of Berlin.
The project will focus on preparing perovskite solar cell technology for high volume manufacturing. This will include the optimisation of the perovskite-silicon tandem solar cell architecture, to make further efficiency improvements on industrial 156 mm x 156 mm wafer formats; the refinement of industrial scale process technology; and life-cycle analysis to inform the social-environmental impact of the tandem solar cells.
Frank P. Averdung, chief executive officer at Oxford PV commented, “The German Government’s investment recognises the opportunity perovskite solar technology has to dramatically enhance the performance of solar energy generation. Oxford PV has made substantial progress in scaling and preparing its technology for high volume manufacturing. With commercial sized tandem cells already in production at our pilot line – it is now a matter of further optimising the process, in preparation for commercial deployment.”
Dr Chris Case, Chief Technology Officer at Oxford PV added “The consortium partners bring together the perfect balance of expertise. Refining the manufacturing process of our perovskite solar cell technology will ensure the highest performing tandem solar cell in the field and the easy transfer of our technology into silicon solar cell and module production lines.”
Last month Oxford PV achieved a world record certified efficiency of 27.3% for its perovskite solar cell. This exceeded the 26.7% efficiency world record for a single junction silicon solar cell - validating the ability of perovskite to enhance the performance of silicon-based photovoltaics. Oxford PV’s perovskite-silicon solar cell technology roadmap extends beyond 30% efficiency.
Share on:
Suggested Items
BAE Systems Unveils Comprehensive Line of M-Code GPS Receivers at Joint Navigation Conference
06/04/2025 | PRNewswireBAE Systems unveiled a diverse line of M-Code Global Positioning System (GPS) receiver solutions at the Joint Navigation Conference in Cincinnati this week, rounding out an extensive line of products that ensure U.S. warfighters have the most dependable GPS systems available across sea, land, and air.
Rehm Thermal Systems Mexico: Ten Years of Growth and Innovation in an Emerging Market
06/03/2025 | Rehm Thermal SystemsOver ten years ago, Luis A. Garcia began his success story at Rehm Thermal Systems. On May 15, 2013, he initially joined as a member of the Rehm USA team.
Top Tech in Taiwan: IPC's Blueprint to Advance Smart Manufacturing
06/04/2025 | Sydney Xiao, IPCRenowned as a global hub of innovation and a cornerstone of the electronics industry, Taiwan is leading advancements in technology and manufacturing. A decade ago, IPC established an office in Taiwan, embedding itself deeply in this innovative ecosystem. Now with nearly 200 member companies in the region, IPC remains dedicated to driving standardization, education, and technological progress in Taiwan’s electronics manufacturing sector.
IIT Kharagpur, A*STAR Singapore Forge Strategic Partnership to Advance Semiconductor Innovation in Asia
06/03/2025 | IIT KharagpurIn a landmark move to foster global collaboration in semiconductor research and talent development, IIT Kharagpur has signed a Memorandum of Understanding (MoU) with the Institute of Microelectronics (IME) under Singapore’s Agency for Science, Technology and Research (A*STAR).
STARTEAM GLOBAL Unveils Innovative Additive Solder Mask Process
06/02/2025 | STARTEAM GLOBALSTARTEAM GLOBAL, a leading PCB manufacturer, has introduced a revolutionary additive solder mask process at its Flero STARTEAM (FST) factory in Italy, leveraging digital inkjet technology to enhance production efficiency and sustainability.