Dan's Biz Bookshelf: 'Getting Naked: A Business Fable'
The Chemical Connection: Common Misconceptions in Wet Processing
It’s Only Common Sense: Selling to Engineers
Panasonic Utilizes 100% Renewable Energy to Power the Consumer Electronics Recycling Plant
December 7, 2018 | Panasonic CorporationEstimated reading time: 2 minutes
Not only has Panasonic Group's consumer electronics recycling plant, Panasonic Eco Technology Center Co., Ltd. (PETEC) made efforts over the years to reduce the energy consumed, it has also implemented solutions to create energy and to procure electricity created by renewable energy. Due to these efforts, it now runs on 100% renewable electricity, but it is taking its efforts a step further to become a zero CO2 emission factory by substituting fossil fuels, etc.
In accordance to the "Environment Vision 2050" publicized in June 2017, Panasonic has undertaken various efforts to establish zero CO2 emission factories. Specifically, it has, for example adopted LED lighting and FEMS (Factory Energy Management System) technology to save energy, implemented solar power generation systems to create energy, and procured electricity created by renewable energy.
To become a pilot factory that will serve as a guiding star for zero CO2 emission factories to follow, PETEC has become the first factory to run 100% on renewable electricity.
Saving Energy
In September 2018, PETEC changed all of the lighting within the factory to LEDs. By doing so, it has reduced the factory's CO2 emissions by approximately 2%.
Creating Energy
Currently, the factory is equipped with 50kW of HIT(TM) solar panels, which has shaved approximately 1% off the factory's CO2 emissions.
Procuring Electricity Created by Renewable Energy
To procure energy necessary after efforts described in above 1 and 2, from April 2018 PETEC began utilizing Kansai Electric Power Co., Inc.'s "Hydraulic Eco Plan," which uses zero CO2 emission hydraulic power. In addition, through Panasonic's procurement division, the Global Procurement Company, PETEC purchased an effective non-fossil certification from the non-fossil value market in April 2018, which makes its factory virtually 100% powered by renewable energy.
Furthermore, in February 2019, PETEC will install 244kW of HIT(TM) solar panels, and 330kW more in December of the same year, bringing the total capacity to 624kW. This, as a result, will help reduce not approximately 1%, but 15% CO2 emissions.
Moreover, PETEC will promote various initiatives, which also involve development of proprietary technologies. These include efforts to save energy by utilizing advanced energy management systems, by further adopting renewable energy such as geothermal heat, and technologies that can absorb, separate, and utilize the CO2 emitted by fossil fuels. And by optimally combining these solutions, PETEC will aspire to become a factory with even superior energy efficiency and zero CO2 emissions.
Panasonic will apply these measures implemented by this pilot factory to factories in Japan and across the world to accelerate its efforts to realize the zero CO2 emission factory goal declared in its Environment Vision 2050.
Share on:
Suggested Items
Rules of Thumb: Design007 Magazine, November 2024
11/11/2024 | I-Connect007 Editorial TeamRules of thumb are everywhere, but there may be hundreds of rules of thumb for PCB design. They’re built on design formulas, fabricators’ limitations, and tribal knowledge. And unfortunately, some longtime rules of thumb should be avoided at all costs. How do we separate the wheat from the chaff, so to speak?
Connect the Dots: Best Practices for Prototyping
09/21/2023 | Matt Stevenson -- Column: Connect the DotsPCB prototyping is a critical juncture during an electronic device’s journey from concept to reality. Regardless of a project’s complexity, the process of transforming a design into a working board is often enlightening in terms of how a design can be improved before a PCB is ready for full production.
The Drive Toward UHDI and Substrates
09/20/2023 | I-Connect007 Editorial TeamPanasonic’s Darren Hitchcock spoke with the I-Connect007 Editorial Team on the complexities of moving toward ultra HDI manufacturing. As we learn in this conversation, the number of shifting constraints relative to traditional PCB fabrication is quite large and can sometimes conflict with each other.
Asia/Pacific AI Spending Surge to Reach a Projected $78 Billion by 2027
09/19/2023 | IDCAsia/Pacific spending on Artificial Intelligence (AI) ), including software, services, and hardware for AI-centric systems will grow to $78.4 billion in 2027, according to International Data Corporation's latest Worldwide Artificial Intelligence Spending Guide.
Intel to Sell Minority Stake in IMS Nanofabrication Business to TSMC
09/13/2023 | IntelIntel Corporation announced that it has agreed to sell an approximately 10% stake in the IMS Nanofabrication business to TSMC. TSMC’s investment values IMS at approximately $4.3 billion, consistent with the valuation of the recent stake sale to Bain Capital Special Situations.