Graphene-Based Implant for Recording Brain Activity at Extremely Low Frequencies
January 3, 2019 | ICFOEstimated reading time: 2 minutes

ICN2, IMB-CNM, CSIC, IDIBAPS, and ICFO report in Nature Materials a graphene-based implant able to record electrical activity in the brain at extremely low frequencies and over large areas. The body of knowledge about the human brain is growing exponentially, but questions big and small remain unanswered. Researchers have been using electrode arrays to record the brain’s electrical activity for decades, mapping activity in different brain regions to understand what it looks like when everything is working, and what is happening when it is not. Until now, however, these arrays have only been able to detect activity over a certain frequency threshold. A new technology developed in Barcelona overcomes this technical limitation, unlocking the wealth of information found below 0.1 Hz, while at the same time paving the way for future brain-computer interfaces.
Developed at the Barcelona Microelectronics Institute (IMB-CNM, CSIC) and the Catalan Institute of Nanoscience and Nanotechnology (ICN2, a center of BIST and CSIC), and the CIBER in Bioengineering, Biomaterials and Nanomedicine (CIBER-BBN), and adapted for brain recordings in collaboration with the August Pi i Sunyer Biomedical Research Institute (IDIBAPS), the technology moves away from electrodes and uses an innovative transistor-based architecture that amplifies the brain’s signals in situ before transmitting them to a receiver. Furthermore, the use of graphene to build this new architecture means the resulting implant can support many more recording sites than a standard electrode array, plus is slim and flexible enough to be used over large areas of the cortex without being rejected or interfering with normal brain function. The result is an unprecedented mapping of the kind of low frequency brain activity known to carry crucial information about different events in the brain such as the onset and progression of epileptic seizures and strokes.
For neurologists this means they finally have access to the brain’s whispered clues. Prof. Matthew Walker, of University College London and world specialist in clinical epilepsy, has called it a ground-breaking technology that has the potential to change the way we record and view electrical activity from the brain. Future applications will give unprecedented insights into where and how seizures begin and end, enabling new approaches to the diagnosis and treatment of epilepsy.
Beyond epilepsy, though, this precise mapping and interaction with the brain has other exciting applications. Taking advantage of the capability of the transistor configuration to create arrays with a very large number of recording sites, by employing a so-called multiplexing strategy, the technology described here is also being adapted by some of the same researchers to restore speech and communication as part of the European project, BrainCom. Led by the ICN2, this project will deliver a new generation of brain-computer interfaces able to explore and repair high-level cognitive functions, with a particular focus on the kind of speech impairment caused by brain or spinal cord injuries (aphasia).
Details of the underlying technological advances (patent pending) can be found in Nature Materials, with lead author Eduard Masvidal Codina of IMB-CNM, CSIC. Work at this institute was led by Dr Anton Guimerà Brunet, while ICREA Prof. Jose A Garrido led efforts at the ICN2. The graphene microtransistors were adapted for brain recordings and tested in vivo at IDIBAPS, led by ICREA Prof. Mavi Sánchez-Vives. An imaging technique was developed in collaboration with ICFO, led by ICREA Prof. Turgut Durduran. The project is co-funded by the Graphene Flagship and the BrainCom project.
Suggested Items
2025 ASEAN IT Spending Growth Slows to 5.9% as AI-Powered IT Expansion Encounters Post-Boom Normalization
06/26/2025 | IDCAccording to the IDC Worldwide Black Book: Live Edition, IT spending across ASEAN is projected to grow by 5.9% in 2025 — down from a robust 15.0% in 2024.
DownStream Acquisition Fits Siemens’ ‘Left-Shift’ Model
06/26/2025 | Andy Shaughnessy, I-Connect007I recently spoke to DownStream Technologies founder Joe Clark about the company’s acquisition by Siemens. We were later joined by A.J. Incorvaia, Siemens’ senior VP of electronic board systems. Joe discussed how he, Rick Almeida, and Ken Tepper launched the company in the months after 9/11 and how the acquisition came about. A.J. provides some background on the acquisition and explains why the companies’ tools are complementary.
United Electronics Corporation Advances Manufacturing Capabilities with Schmoll MDI-ST Imaging Equipment
06/24/2025 | United Electronics CorporationUnited Electronics Corporation has successfully installed the advanced Schmoll MDI-ST (XL) imaging equipment at their advanced printed circuit board facility. This significant technology investment represents a continued commitment to delivering superior products and maintaining their position as an industry leader in precision PCB manufacturing.
Insulectro & Dupont Host Technology Symposium at Silicon Valley Technology Center June 25
06/22/2025 | InsulectroInsulectro, the largest distributor of materials for use in the manufacture of PCBs and printed electronics, and DuPont, a major manufacturer of flex laminates and chemistry, invite fabricators, OEMS, designers, and engineers to attend an Innovation Symposium – Unlock the Power - this Wednesday, June 25, at DuPont’s Silicon Valley Technology Center in Sunnyvale, CA.
OKI, NTT Innovative Devices Establish Mass Production Technology for High-Power Terahertz Devices by Heterogeneous Material Bonding
06/21/2025 | BUSINESS WIREOKI, in collaboration with NTT Innovative Devices Corporation, has established mass production technology for high-power terahertz devices using crystal film bonding (CFB) technology for heterogeneous material bonding to bond indium phosphide (InP)-based uni-traveling carrier photodiodes (UTC-PD) onto silicon carbide (SiC) with excellent heat dissipation characteristics for improved bonding yields.