NTU Singapore’s 9th Satellite Successfully Deployed in Space
January 25, 2019 | NTUEstimated reading time: 6 minutes
Scientists from Nanyang Technological University, Singapore’s (NTU Singapore) has successfully launched and deployed its ninth satellite.
The AOBA VELOX-IV and SPATIUM-I (which was launched last October) are nanosatellites trialling new imaging and manoeuvring technologies in space. The NTU scientists plan to use their findings to build satellites robust enough to withstand what would be Singapore’s first lunar mission.
The scientists believe that a lunar mission may be achievable within five years, using satellites weighing no more than 100kg each, which would be lighter than any other that has made the 384,400-kilometre journey.
NTU’s 8th and 9th satellites were built in collaboration with Kyushu Institute of Technology (Kyutech), one of Japan’s leading universities for satellite research and engineering.
The AOBA VELOX-IV nanosatellite was launched from the Japan Aerospace Exploration Agency Epsilon-4 rocket, which lifted off last Friday, 18 January, at 8:50 am Singapore time.
The 2.8kg satellite carries two new technologies that will be tested and validated in space. First is a special low-light camera that can capture and observe in less than two seconds Earth’s horizon glow, a crescent of light occurring on the horizon just before sunrise and after sunset.
Its second new technology is a quad-jet plasma thruster that helps the satellite with altitude control, such as when it enters a lunar orbit.
The SPATIUM-I which stands for Space Precision Atomic-click Timing Utility Mission, was launched from the International Space Station (ISS) in October last year and is currently completing its first phase of experiments.
The 2.6 kg satellite is the first nanosatellite in the world to successfully demonstrate a chip scale atomic clock (CSAC) working in Low Earth Orbit. This demonstrates that the ‘Built-at-NTU’ atomic clock keeps time with a stability of 0.2 billionths in a second, on a par with satellites a thousand times bigger.
Such precision timing devices, which are critical to make on-board electronics function in synchronicity, are usually not found on smaller satellites due to limited space, low power supply and high cost.
The SPATIUM-I is also the first in a planned series of nanosatellites built by NTU that will map out earth’s ionosphere in three-dimension (3D). This will allow NTU scientists to understand the ionospheric morphology and its perturbations that have a pronounced effect on long-distance radio communications, navigation and weather patterns.
NTU Singapore Vice President (Research) Professor Lam Khin Yong said the successful launch and deployment of AOBA VELOX-IV and the SPATIUM-I respectively are important steps forward for NTU.
“Building on NTU Singapore’s satellite engineering expertise over the last decade, our two latest satellite launches demonstrate our leading-edge space capabilities. We have shrunk advanced cameras, thrusters and the electronics capability of larger satellites into something the size of a shoebox,” said Prof Lam.
“Satellite technologies are considered the pinnacle of engineering, given that these machines have to be extremely robust and perform reliably in space, one of the most extreme environments known to mankind. The fact that NTU’s, indeed Singapore’s, first home-made satellite, X-Sat, is still operating after almost eight years, is a testament to the quality and robustness of NTU’s engineered satellites.”
Professor Mengu Cho, Director of Kyutech’s Laboratory of Spacecraft Environment Interaction Engineering, said, “SPATIUM-I and AOBA VELOX-IV are the second and third satellites developed together by Kyutech and NTU. The launches of the two satellites show that the research collaboration between the two universities has grown to multiple aspects.”
“SPATIUM-I is the first in a series of technology demonstrations toward the ionospheric mapping and weather forecasting mission utilising the precise reference signal generated by the chip-scale atomic clock. The mission may bring us tremendous scientific as well as practical and commercial values. AOBA VELOX-IV demonstrates technologies necessary for a future lunar mission, which I really wish to carry out jointly with NTU in the near future.”
“AOBA VELOX-IV was launched as a part of JAXA’s (Japan Aerospace Exploration Agency) Innovative Satellite Technology Demonstration Program. The satellite was chosen by JAXA because of the commercial value of technologies to be demonstrated by AOBA VELOX-IV, which are useful not only for the lunar mission but also for other Earth-orbiting CubeSat missions.”
Page 1 of 2
Suggested Items
RTX’s Pratt & Whitney Establishes European Technology and Innovation Center in the Netherlands
01/27/2025 | RTXRTX’s Pratt & Whitney announced plans to establish a European Technology and Innovation Center (ETIC) dedicated to advancing technologies for enabling more energy efficient and sustainable aviation.
TopLine’s Martin Hart to Present at Microelectronics Reliability and Qualification Workshop (MRQW)
01/16/2025 | TopLine CorporationTopLine Corporation’s Founder and CEO Martin Hart has been invited to deliver a presentation on the topic of how “Braided Solder Columns reduce mechanical stress in large heterogeneous 2.5D advanced packages for space and commercial applications” at The Aerospace Corporation’s Microelectronics Reliability and Qualification Workshop (MRQW) in Los Angeles (El Segundo), California on February 12, 2025.
Merlin Circuit Technology Achieves Prestigious JOSCAR Accreditation
01/14/2025 | Merlin Circuit TechnologyMerlin Circuit Technology is proud to announce it has been awarded the coveted Joint Approvals Group for Industry (JAG) Standard 001 (JOSCAR) accreditation.
FTG Aerospace Tianjin Approved as an AMO by CAAC
01/08/2025 | Globe NewswireFiran Technology Group Corporation, a leading provider of electronic products and avionic sub-systems for the aerospace and defense markets, has received approval from Civil Aviation Administration of China to be an Approved Maintenance Organization (AMO).
GKN Aerospace Officially Opens $55 Million Repair Facility for Aero-Engine Components in San Diego
01/02/2025 | GKN AerospaceGKN Aerospace has opened a new 150,000 square-foot facility in San Diego, California, strengthening the company’s global repair network and commitment to sustainable, cutting-edge MRO solutions.