Transmission of Light-Delivered Data through Nonreciprocal Circuitry
January 25, 2019 | City University of New YorkEstimated reading time: 4 minutes
The development of fiber optics technology has been indispensable to increasing the speed at which information is delivered over large distances by relying on light to carry information rather than electricity. Currently, incoming light signals are converted into electrical signals, after which the information they carry is processed. Digital communications and sharing of information would be even faster and more energy efficient if light could be used throughout the entire process, but significant additional advances in integrated optical circuits and light-based computing are still required.
In recent years, scientists have been working on ways to develop and use nonreciprocal optical circuitry — which manipulates light waves so that they are allowed to travel only in one direction — to solve these challenges and improve the ability to process large amounts of information. Nonreciprocal optical circuits can be used, for example, to avoid unwanted reflections that interfere with data transmission and can destabilize on-chip light sources. In a new paper published in the journal Optica, the flagship journal of the Optical Society, researchers at the Advanced Science Research Center (ASRC) at The Graduate Center of The City University of New York (CUNY) lay out a rigorous theoretical framework that clarifies the fundamental principles governing resonant nonreciprocal circuits and resolves some outstanding questions on their potentials and limitations.
The science of studying nonreciprocal optical circuits is in many ways still at its infancy, and significant confusion has arisen in scientific literature regarding what is possible or not possible in systems that break reciprocity and allow one-way propagation of light. Recent papers have argued that nonreciprocal resonant optical circuits may be able to indefinitely store multi-frequency light waves without loss of integrity, enabling devices to process data much more effectively. But the new research from ASRC scientists shows that nonreciprocal circuits provide no advantage compared to conventional systems in overcoming the common trade-off between the time delay that can be imparted on an incoming signal and its frequency bandwidth, a central challenge in modern optical computing systems. Their theory clarifies the underlying principles that govern how light interacts with nonreciprocal devices, establishing the ultimate limits in their performance, and the opportunities that they may realistically provide to enhance their interaction with the incoming signals.
“We were intrigued by recent claims on nonreciprocal devices that appeared too good to be true,” said Sander Mann, first author of the new paper and a Graduate Center postdoctoral fellow who works in the lab of Andrea Alù, director of the ASRC’s Photonics Initiative and professor of physics at The Graduate Center. “Our theory clarifies the fundamental principles that govern light propagation in resonant nonreciprocal devices, and shows realistic opportunities to use them in ways to improve optical signal transmission, storage, processing and computing.”
In addition to providing rigorous, structural bounds on the possibilities of nonreciprocal devices, the theory developed by the ASRC researchers points to several interesting properties of nonreciprocal circuits that may prove beneficial in the transport of light signals, and ultimately improve the speed and efficiency in the processing of data.
“Our group has been working on nonreciprocal light propagation for a few years, and we have been discovering many opportunities offered by these one-way devices,” said Alù. “While the phenomenon of one-way transport of light is established, the principles governing it are quite counterintuitive and easily lead to confusion. Our newly developed theory clarifies the opportunities and limits of using nonreciprocal devices to slow light, and we now are looking into ways to operate near the newly derived bounds to maximally enhance the interaction of light with nanoscale devices and nonlinearities.”
The ASRC photonics team’s research was supported by the Air Force Office of Scientific Research, the Defense Advanced Research Projects Agency and the Netherlands Organisation for Scientific Research (NWO).
About the Advanced Science Research Center
The ASRC at The Graduate Center of The City University of New York elevates scientific research and education at CUNY and beyond through initiatives in five distinctive, but increasingly interconnected disciplines: environmental sciences, nanoscience, neuroscience, photonics, and structural biology. The ASRC promotes a collaborative, interdisciplinary research culture with renowned researchers from each of the initiatives working side-by-side in the ASRC’s core facilities, sharing equipment that is among the most advanced available.
About The Graduate Center of The City University of New York
The Graduate Center of The City University of New York (CUNY) is a leader in public graduate education devoted to enhancing the public good through pioneering research, serious learning, and reasoned debate. The Graduate Center offers ambitious students more than 40 doctoral and master’s programs of the highest caliber, taught by top faculty from throughout CUNY — the nation’s largest public urban university. Through its nearly 40 centers, institutes, and initiatives, including its Advanced Science Research Center (ASRC), The Graduate Center influences public policy and discourse and shapes innovation. The Graduate Center’s extensive public programs make it a home for culture and conversation.
Suggested Items
Alternative Manufacturing Inc. (AMI) Appoints Gregory Picard New Business Development Manager
05/01/2025 | Alternative Manufacturing, Inc.Alternative Manufacturing Inc. (AMI) is pleased to announce the appointment of Mr. Gregory Picard as our new Business Development Manager. Picard brings a wealth of experience in Sales and Business Development, having worked with some of the most prominent names in the industry.
Elephantech, Logitech Together Drive Disruptive Electronics Innovation
05/01/2025 | ElephantechElephantech Inc. announced a groundbreaking collaboration with Logitech International to revolutionize peripherals manufacturing and the printed circuit board (PCB) industry.
A Visit With ‘Flexperts’ Mark Finstad and Nick Koop
05/01/2025 | Joe Fjelstad, Verdant ElectronicsAt IPC APEX EXPO 2025, I chatted with seasoned flex experts Mark Finstad and Nick Koop about "Flexperts" and their roles as leading educators and in the realm of standards development for this increasingly indispensable electronic interconnection technology. They have been teaching about lessons learned and how to successfully navigate the “seas” of flexible circuits to help their students avoid the hazards that have taken down many of their predecessors in the past.
Candor Elevates PCB Fabrication Services with Continued Facility Upgrades
04/28/2025 | Candor CircuitsOntario-based circuit board manufacturer, Candor Circuit Boards has recently completed a series of facility upgrades to improve their PCB offerings. These investments will allow Candor to provide higher volumes of complicated boards more efficiently with better yield. The new technology has allowed the company to take on exciting high technology projects and collaborations in industries such as Military and Aerospace, Medical, Energy and more.
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
04/25/2025 | Nolan Johnson, I-Connect007I’m highlighting a discussion on the positive potential coming from the recent changes in global trade policy—from IPC’s Government Relations team, and from TTM CEO Tom Edman. In the realm of designers and purchasers realm, there’s news from Screaming Circuits and ASC/Sunstone Circuits to share. Finally, additive manufacturing and the release of CFX 2.0 highlight just some of the news coming to the shop floor as well.