A Flexible Future
February 20, 2019 | UNSW SydneyEstimated reading time: 2 minutes
 
                                                                    Thin, flexible panels that will revolutionise how we use solar energy are on the drawing board at UNSW. Imagine a future in which thin, flexible solar panels cover the surfaces of cars and buildings, powering their activities.
Xiaojing Hao, associate professor and Scientia fellow in the School of Photovoltaic and Renewable Energy Engineering, and her team, are building such cells made of kesterite photovoltaics.
Containing copper, zinc, tin and sulphur, they are cheaper to make and more environmentally friendly than other thin-film varieties on the market, some of which contain toxic materials, such as cadmium, or rare elements, such as indium and tellurium.
There are significant industrial applications for flexible, thin photovoltaic cells. But a key challenge has been their limited capacity to generate energy with a comparable efficiency and cost to that of conventional silicon solar panels.
In 2017, A/Prof Hao’s team built a kesterite photovoltaic cell that attained 11% efficiency. This set a world record—a fourth for the team—and was the first time that the 10% efficiency threshold was broken for this type of cell. This work was published in the Nature Energy journal in 2018.
“For each efficiency change, we need a step-change technology to make it happen,” says A/Prof Hao. She hopes to improve the efficiency of kesterite photovoltaic cells to close to 20% in the next five years.
To do this, her team needs to work out how to prevent the common defects in the lattice of the kesterite material. The reasons for these defects are not yet well understood. However, once corrected, the electrical quality of the material—the main barrier to efficiency—will improve.
Exciting findings from 2018 point to some new directions to control the defects and improve the performance of kesterite cells. The plan is to apply for Australian Research Council funding to delve deeper and publish some of these results in 2019.
Dr Xiaojing Hao of UNSW's Australian Centre for Advanced Photovoltaics holding the new CZTS solar cells.
In 2017, A/Prof Hao was one of 18 young scientists selected from more than 1000 applicants to take up one of UNSW’s inaugural Scientia fellowships. Last year, she won two prestigious prizes: the $5000 Premier’s Prize for Energy Innovation from the state of New South Wales and the $3000 UNSW Engineering Faculty Dean’s Award for Excellence in Research. A/Prof Hao’s enthusiasm for discovery is given free rein at UNSW.
“I love to explore the unknowns and deal with challenges. Achieving research progress, particularly through challenging work, brings me deep fulfilment.”
Testimonial
"Your magazines are a great platform for people to exchange knowledge. Thank you for the work that you do."
Simon Khesin - Schmoll MaschinenSuggested Items
WestDev Announces Advanced Thermal Analysis Integration for Pulsonix PCB Design Suite
10/29/2025 | WestDev Ltd.Pulsonix, the industry-leading PCB design software from WestDev Ltd., announced a major enhancement to its design ecosystem: a direct interface between Pulsonix and ADAM Research's TRM (Thermal Risk Management) analysis software.
Designers Notebook: Power and Ground Distribution Basics
10/29/2025 | Vern Solberg -- Column: Designer's NotebookThe principal objectives to be established during the planning stage are to define the interrelationship between all component elements and confirm that there is sufficient surface area for placement, the space needed to ensure efficient circuit interconnect, and to accommodate adequate power and ground distribution.
Episode 6 of Ultra HDI Podcast Series Explores Copper-filled Microvias in Advanced PCB Design and Fabrication
10/15/2025 | I-Connect007I-Connect007 has released Episode 6 of its acclaimed On the Line with... American Standard Circuits: Ultra High Density Interconnect (UHDI) podcast series. In this episode, “Copper Filling of Vias,” host Nolan Johnson once again welcomes John Johnson, Director of Quality and Advanced Technology at American Standard Circuits, for a deep dive into the pros and cons of copper plating microvias—from both the fabricator’s and designer’s perspectives.
Nolan’s Notes: Tariffs, Technologies, and Optimization
10/01/2025 | Nolan Johnson -- Column: Nolan's NotesLast month, SMT007 Magazine spotlighted India, and boy, did we pick a good time to do so. Tariff and trade news involving India was breaking like a storm surge. The U.S. tariffs shifted India from one of the most favorable trade agreements to the least favorable. Electronics continue to be exempt for the time being, but lest you think that we’re free and clear because we manufacture electronics, steel and aluminum are specifically called out at the 50% tariff levels.
MacDermid Alpha & Graphic PLC Lead UK’s First Horizontal Electroless Copper Installation
09/30/2025 | MacDermid Alpha & Graphic PLCMacDermid Alpha Electronics Solutions, a leading supplier of integrated materials and chemistries to the electronics industry, is proud to support Graphic PLC, a Somacis company, with the installation of the first horizontal electroless copper metallization process in the UK.

 
                         
                                     
                                     
                                     
                                     
                                             
                                             
                                             
                                             
                                             
                                     
                                             
                                             Driving Innovation: Mechanical and Optical Processes During Rigid-flex Production
                                         Driving Innovation: Mechanical and Optical Processes During Rigid-flex Production It’s Only Common Sense: Your Biggest Competitor Is Complacency
                                         It’s Only Common Sense: Your Biggest Competitor Is Complacency The Chemical Connection: Onshoring PCB Production—Daunting but Certainly Possible
                                         The Chemical Connection: Onshoring PCB Production—Daunting but Certainly Possible





 
                     
                 
                    