IPTE: Depaneling with More Efficiency
May 8, 2019 | IPTEEstimated reading time: 3 minutes
"Frameless routing" is a new option to increase efficiency of depaneling with the IPTE depaneler FlexRouter II. With frameless routing, depaneling of printed circuit boards without a frame, no PCB waste is left after milling. This technology increases the efficiency concerning ecological aspects by reducing unusable PCB waste. Therefore a new transport solution was developed for PCBs without a frame, to realize fast, stress-free and precise depaneling with a milling spindle.
The FlexRouter II aims especially to middle-sized to high volume production lots featuring a high variety of different PCB versions, these are the demanding high-mix depaneling tasks based on short machine set-up procedures. Despite the very small footprint (machine width is only 500 mm), boards with sizes of up to 330 mm x 400 mm (length x width) can be processed without difficulties. Four of the seven machine axes in total are integrated as extremely precise linear drives of latest technology.
In the FlexRouter II the PCB panel will be fed in, securely clamped, and its position precisely identified and adjusted by through the use of a precise measurement system. Since a freely programmable servo-gripper is used for clamping during the cutting operations a panel-specific gripper is usually not needed, and there are no additional gripper tooling costs. The gripper mechanism features a Cartesian 3-axis system assembled on a rotating axis. The milling spindle under the panel is also positioned by a Cartesian 3-axis system and can be equipped with different spindle types. With these functions, sophisticated applications are possible. As the gripper fingers are exchanged automatically the change-over from one product to another is remarkably fast and easy.
After the milling spindle has cut a single PCB from the panel the board is set aside clamped by the gripper. For this step, a wide variety of different PCB stacking options are obtainable according to customer requirements in order to receive an optimum process flow, such as dual and single tape conveyor feeder, tray module to a size of maximal 600 x 400 mm, work-piece holder, linear shuttle or rotating table for the subsequent and individual customer procedures. Also available as an option is the accurate measuring of the singulated PCB by AOI (automated optical inspection) technology.
The ccreation of new routing programs will be aided and made faster through the use of a camera-based system or the integrated DXF-converting software which supports the fast and uncomplicated CAD data acquisition. The machine user-interface is designed for the intuitive and easy execution of all necessary functions of the FlexRouter II. And of course there are many more special standard features implemented in the new FlexRouter II, such as a provision for the usage of various sections of the milling head in order to reduce the costs for this consumable, the automated exchange of milling tools and a detection function for their possible break down.
For more than 20 years IPTE, one of the world’s leading suppliers of automated production equipment for the electronics and mechanics industry, has been successful in the product category of depaneling machines. The machines prove themselves every day in practice in numerous installations and applications in production around the globe. Besides the machines themselves, numerous individual gripper/fixture mechanism projects have been realized by IPTE as well.
The main focus in developing and enhancing the IPTE depanelers is to fit the requirements of the market’s and customer’s needs. By doing so the performance and the quality are on a very high level. With the model SpeedRouter, launched 1998, IPTE has made highly flexible machine configurations possible, which are capable of in-line integration allowing an absolutely reliable and low stress routing process of large panels containing multiple boards. According to the PCB layout the routing can be done with milling and sawing actions, or by a combination of both cutting methods.
IPTE's large portfolio of options and add-ons for the system periphery efficiently support the integration in already existing lines. IPTE’s depaneling machines are best suited for specific requirements in applications where tight tolerances are of essence.
IPTE can provide the appropriate solution for practically every depaneling application from its full-sized set of different router systems, depending on product-mix, the manufacturing quantity and the degree of automation needed on the shop floor.
Testimonial
"Advertising in PCB007 Magazine has been a great way to showcase our bare board testers to the right audience. The I-Connect007 team makes the process smooth and professional. We’re proud to be featured in such a trusted publication."
Klaus Koziol - atgSuggested Items
Register Now for the HATS²™ Technical Day at GEN3 HQ
08/05/2025 | GEN3GEN3 a world-leading manufacturer of testing, measurement and production solutions for electronics reliability. Headquartered in Farnborough, UK, GEN3 is announcing the final call for registrations to attend the exclusive HATS²™ Technical Day — a hands-on, live demonstration event showcasing the Highly Accelerated Thermal Shock Tester (HATS²™), the groundbreaking innovation from industry pioneer Bob Neves.
UHDI Fundamentals: UHDI Technology and Industry 4.0
08/05/2025 | Anaya Vardya, American Standard CircuitsUltra high density interconnect (UHDI) technology is rapidly transforming how smart systems are designed and deployed in Industry 4.0. With its capacity to support highly miniaturized, high-performance, and densely packed electronics, UHDI is a critical enabler of the smart, connected, and automated industrial future. This article explores the synergy between UHDI and Industry 4.0 technologies, highlighting applications, benefits, and future directions.
BAE Systems' Growing Partnership in Norway
08/04/2025 | BAE SystemsAs two of Europe’s leading defence companies, BAE Systems and Kongsberg are already working together in a number of areas to support militaries across NATO and its wider group of allies.
Technica to Host Demo Days Event August 13-14
08/04/2025 | Technica USATechnica USA is proud to announce its upcoming Demo Days Event, taking place August 13–14 at the company’s Demo Center in San Jose, California. The event will feature live demonstrations and presentations from key supply partners ESSEMTEC, INOVAXE, and PARMI showcasing the latest innovations in SMT manufacturing and automation technology.
Federal Electronics Mexico Enhances SMT Line with Installation of Heller Industries Reflow Oven
08/01/2025 | Federal ElectronicsFederal Electronics, a leader in providing advanced electronic manufacturing services, has enhanced its surface mount technology (SMT) operations with the installation of a new Heller Industries reflow oven at its facility in Hermosillo. This upgrade supports the company’s continued growth in high-reliability markets such as aerospace, medical, industrial, and instrumentation.