AI-Driven Imaging System Protects Authenticity
May 30, 2019 | NYU Tandon School of EngineeringEstimated reading time: 2 minutes
To thwart sophisticated methods of altering photos and video, researchers at the NYU Tandon School of Engineering have demonstrated an experimental technique to authenticate images throughout the entire pipeline, from acquisition to delivery, using artificial intelligence (AI).
In tests, this prototype imaging pipeline increased the chances of detecting manipulation from approximately 45 percent to over 90 percent without sacrificing image quality.
Determining whether a photo or video is authentic is becoming increasingly problematic. Sophisticated techniques for altering photos and videos have become so accessible that so-called "deep fakes"—manipulated photos or videos that are remarkably convincing and often include celebrities or political figures—have become commonplace.
Pawel Korus, a research assistant professor in the Department of Computer Science and Engineering at NYU Tandon, pioneered this approach. It replaces the typical photo development pipeline with a neural network - one form of AI - that introduces carefully crafted artifacts directly into the image at the moment of image acquisition. These artifacts, akin to "digital watermarks," are extremely sensitive to manipulation.
"Unlike previously used watermarking techniques, these AI-learned artifacts can reveal not only the existence of photo manipulations, but also their character," Korus said.
The process is optimized for in-camera embedding and can survive image distortion applied by online photo sharing services.
The advantages of integrating such systems into cameras are clear.
"If the camera itself produces an image that is more sensitive to tampering, any adjustments will be detected with high probability," said Nasir Memon, a professor of computer science and engineering at NYU Tandon and co-author, with Korus, of a paper detailing the technique. "These watermarks can survive post-processing; however, they're quite fragile when it comes to modification: If you alter the image, the watermark breaks," Memon said.
Most other attempts to determine image authenticity examine only the end product - a notoriously difficult undertaking.
Korus and Memon, by contrast, reasoned that modern digital imaging already relies on machine learning. Every photo taken on a smartphone undergoes near-instantaneous processing to adjust for low light and to stabilize images, both of which take place courtesy of onboard AI. In the coming years, AI-driven processes are likely to fully replace the traditional digital imaging pipelines. As this transition takes place, Memon said that "we have the opportunity to dramatically change the capabilities of next-generation devices when it comes to image integrity and authentication. Imaging pipelines that are optimized for forensics could help restore an element of trust in areas where the line between real and fake can be difficult to draw with confidence."
Suggested Items
TT Electronics Achieves ISO 13485 Medical Certification at Mexicali EMS Facility
06/27/2025 | TT ElectronicsThis milestone underscores TT Electronics’ commitment to delivering high-quality, compliant, and reliable manufacturing solutions to its global customers in healthcare and life sciences.
Elementary Mr. Watson: Retro Routers vs. Modern Boards—The Silent Struggle on Your Screen
06/26/2025 | John Watson -- Column: Elementary, Mr. WatsonThere's a story about a young woman preparing a holiday ham. Before putting it in the pan, she cuts off the ends. When asked why, she shrugs and says, "That's how my mom always did it." She asks her mother, who gives the same answer. Eventually, the question reaches Grandma, who laughs and says, "Oh, I only cut the ends off because my pan was too small." This story is a powerful analogy for how many PCB designers approach routing today.
Stephen Winchell Appointed DARPA Director
06/02/2025 | DARPAStephen Winchell was sworn in today as the 24th director of the Defense Advanced Research Projects Agency.
Uyemura Expands Engineering Team in Great Lakes Region
05/30/2025 | UyemuraAndrew Jin has joined Uyemura’s Engineering Team as Technical Service Engineer for the Midwest. Jin was formerly with Sensient Technologies, Flavors and Extracts Division, where his focus was CO2 emissions and water quality; he also did capital project work with production equipment.
Defining the Ideal PCB Design Data Output
05/27/2025 | Stephen V. Chavez, Siemens EDAAt the heart of delivering successful, manufacturable printed circuit boards lies a vital question: What should your design data output package include to best support manufacturing? The answer: It depends. There are many factors to consider regarding the specific category you’re designing for—such as mil/aero, space, medical, and commercial. Other factors that need to be considered are requirements and engineering intent.